On Fri, Dec 13, 2019, 2:01 AM Sebastian Huber < sebastian.hu...@embedded-brains.de> wrote:
> On 11/11/2019 23:51, Joel Sherrill wrote: > > Hi > > > > I was running tests on psim and they are all timing out. > > > > Any ideas or is this working for someone else? > > Yes, I have the same problem. Running them by hand works: > > powerpc-rtems5-run -f > /scratch/git-rtems-tools/tester/rtems/testing/bsps/psim-device-tree > ticker.exe > OpenPIC Version ? (1 CPUs and 1 IRQ sources) at 0x202571776 > OpenPIC Vendor 0 (Unknown), Device 0 (Unknown), Stepping 0 > Overriding NumSources (1) from configuration with 16 > OpenPIC timer frequency is not set > BATs must not overlap; area 0x08000000..0x09000000 hits DBAT 0 > BATs must not overlap; area 0x0c000000..0x0d000000 hits DBAT 0 > > > *** BEGIN OF TEST CLOCK TICK *** > *** TEST VERSION: 5.0.0.782113767f3e60389423c169f5c337ec3fb50feb > *** TEST STATE: EXPECTED_PASS > *** TEST BUILD: RTEMS_MULTIPROCESSING RTEMS_NETWORKING RTEMS_POSIX_API > *** TEST TOOLS: 7.5.0 20191114 (RTEMS 5, RSB > f3b44b25d1353253d1454abc695621aafb8c4a97, Newlib d14714c69) > TA1 - rtems_clock_get_tod - 09:00:00 12/31/1988 > TA2 - rtems_clock_get_tod - 09:00:00 12/31/1988 > TA3 - rtems_clock_get_tod - 09:00:00 12/31/1988 > TA1 - rtems_clock_get_tod - 09:00:04 12/31/1988 > TA2 - rtems_clock_get_tod - 09:00:09 12/31/1988 > TA1 - rtems_clock_get_tod - 09:00:09 12/31/1988 > TA3 - rtems_clock_get_tod - 09:00:14 12/31/1988 > TA1 - rtems_clock_get_tod - 09:00:14 12/31/1988 > TA2 - rtems_clock_get_tod - 09:00:19 12/31/1988 > TA1 - rtems_clock_get_tod - 09:00:19 12/31/1988 > TA1 - rtems_clock_get_tod - 09:00:24 12/31/1988 > TA3 - rtems_clock_get_tod - 09:00:29 12/31/1988 > TA2 - rtems_clock_get_tod - 09:00:29 12/31/1988 > TA1 - rtems_clock_get_tod - 09:00:29 12/31/1988 > TA1 - rtems_clock_get_tod - 09:00:34 12/31/1988 > > *** END OF TEST CLOCK TICK *** > > > *** FATAL *** > fatal source: 5 (RTEMS_FATAL_SOURCE_EXIT) > fatal code: 0 (0x00000000) > RTEMS version: 5.0.0.782113767f3e60389423c169f5c337ec3fb50feb > RTEMS tools: 7.5.0 20191114 (RTEMS 5, RSB > f3b44b25d1353253d1454abc695621aafb8c4a97, Newlib d14714c69) > executing thread ID: 0x08a010003 > executing thread name: TA2 > It appears based on testing with Chris that the gdb mi code from the tester works with Python 3 and not 2. Would you happen to be using python 2? > > -- > Sebastian Huber, embedded brains GmbH > > Address : Dornierstr. 4, D-82178 Puchheim, Germany > Phone : +49 89 189 47 41-16 > Fax : +49 89 189 47 41-09 > E-Mail : sebastian.hu...@embedded-brains.de > PGP : Public key available on request. > > Diese Nachricht ist keine geschäftliche Mitteilung im Sinne des EHUG. >
_______________________________________________ devel mailing list devel@rtems.org http://lists.rtems.org/mailman/listinfo/devel
