Ok understood. If i will add Freedom E310 related code in bsp/riscv/riscv directory then there are some code changes related to "console, btimer and other minor things" so can i add this changes under new #define let's say #define RISCV_ENABLE_FRDME310_SUPPORT ?
I am planning to add this #define in configure.ac through RTEMS_BSPOPTS_SET([RISCV_ENABLE_FRDME310_SUPPORT],[*],[1]), By default it is disabled. what's your suggestion on this? -Pragnesh On Wed, Sep 11, 2019 at 1:03 PM Sebastian Huber <sebastian.hu...@embedded-brains.de> wrote: > > On 11/09/2019 09:27, Pragnesh Patel wrote: > > Thanks for the clarification. i am also agree with your comments but > > let's say in future, we want to add I2C and SPI for Freedom E310 then > > what's your suggestion? > > Future I2C and SPI drivers should be added to: > > https://git.rtems.org/rtems/tree/cpukit/dev > > They should be initialized in a BSP for example through the device tree. > Currently, we lack a proper generic initialization via the device tree. > > -- > Sebastian Huber, embedded brains GmbH > > Address : Dornierstr. 4, D-82178 Puchheim, Germany > Phone : +49 89 189 47 41-16 > Fax : +49 89 189 47 41-09 > E-Mail : sebastian.hu...@embedded-brains.de > PGP : Public key available on request. > > Diese Nachricht ist keine geschäftliche Mitteilung im Sinne des EHUG. _______________________________________________ devel mailing list devel@rtems.org http://lists.rtems.org/mailman/listinfo/devel
