Dear Joel, thanks for the quick response. my command was:
$HOME/dev/kernel/rtems/configure --prefix=$HOME/dev/rtems/5 --target=arm-rtems5 --enable-rtemsbsp=tms570lc4357 --enable-maintainer-mode --enable-tests Thanks and Regards, Aby On Tue, May 7, 2019, 3:59 PM <devel-requ...@rtems.org> wrote: > Send devel mailing list submissions to > devel@rtems.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://lists.rtems.org/mailman/listinfo/devel > or, via email, send a message with subject or body 'help' to > devel-requ...@rtems.org > > You can reach the person managing the list at > devel-ow...@rtems.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of devel digest..." > > > Today's Topics: > > 1. RTEMS 5.0 error occurred in 'make' while --enable- tests are > done (Aby Tom) > 2. Re: RTEMS 5.0 error occurred in 'make' while --enable- tests > are done (Joel Sherrill) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Tue, 7 May 2019 15:44:38 +0200 > From: Aby Tom <abytha...@gmail.com> > To: devel@rtems.org > Subject: RTEMS 5.0 error occurred in 'make' while --enable- tests are > done > Message-ID: > <CADH5PD1CL8A2CRQruERf2rp1iPJyBHk-NHuYCWT8D8qUoR= > t...@mail.gmail.com> > Content-Type: text/plain; charset="utf-8" > > Hello everyone, > > I am new to RTEMS, and was trying to build a new bsp for RTEMS 5 for tms570 > family of boards. > > While doing the make, i come across this error. > > I had done --enable-tests in the previous command. > > Can anyone help me with this? Output from terminal is shown below. > > (.... represent some omitted output results) > > ..... > > /home/dev/kernel/rtems/c/src/../../cpukit/libfs/src/nfsclient/src/nfs.c: In > function 'nfs_fsunmount_me': > > /home/dev/kernel/rtems/c/src/../../cpukit/libfs/src/nfsclient/src/nfs.c:1928:7: > warning: variable 'status' set but not used [-Wunused-but-set-variable] > int status; > ..... > > /home/dev/kernel/rtems/c/src/../../cpukit/libfs/src/nfsclient/src/rpcio.c: > In function 'rpcUdpServerCreate': > > /home/dev/kernel/rtems/c/src/../../cpukit/libfs/src/nfsclient/src/rpcio.c:567:11: > error: 'llock' undeclared (first use in this function); did you mean > 'clock'? > MU_LOCK( llock ); > > ..... > > > /home/dev/kernel/rtems/c/src/../../cpukit/libfs/src/nfsclient/src/rpcio.c:204:54: > note: in definition of macro 'MU_LOCK' > #define MU_LOCK(mutex) rtems_recursive_mutex_lock(&(mutex)) > > > > /home/dev/kernel/rtems/c/src/../../cpukit/libfs/src/nfsclient/src/rpcio.c:567:11: > note: each undeclared identifier is reported only once for each function it > appears in > MU_LOCK( llock ); > > ..... > > /home/dev/kernel/rtems/c/src/../../cpukit/libfs/src/nfsclient/src/rpcio.c: > In function 'rpcUdpXactCreate': > > /home/dev/kernel/rtems/c/src/../../cpukit/libfs/src/nfsclient/src/rpcio.c:667:11: > error: 'hlock' undeclared (first use in this function); did you mean > 'clock'? > MU_LOCK(hlock); > ^ > > /home/dev/kernel/rtems/c/src/../../cpukit/libfs/src/nfsclient/src/rpcio.c:204:54: > note: in definition of macro 'MU_LOCK' > #define MU_LOCK(mutex) rtems_recursive_mutex_lock(&(mutex)) > ^~~~~ > /home/dev/kernel/rtems/c/src/../../cpukit/libfs/src/nfsclient/src/rpcio.c: > In function 'rpcUdpXactDestroy': > > /home/dev/kernel/rtems/c/src/../../cpukit/libfs/src/nfsclient/src/rpcio.c:711:11: > error: 'hlock' undeclared (first use in this function); did you mean > 'clock'? > MU_LOCK(hlock); > ^ > > /home/dev/kernel/rtems/c/src/../../cpukit/libfs/src/nfsclient/src/rpcio.c:204:54: > note: in definition of macro 'MU_LOCK' > #define MU_LOCK(mutex) rtems_recursive_mutex_lock(&(mutex)) > ^~~~~ > /home/dev/kernel/rtems/c/src/../../cpukit/libfs/src/nfsclient/src/rpcio.c: > In function 'rpcUdpRcv': > > /home/dev/kernel/rtems/c/src/../../cpukit/libfs/src/nfsclient/src/rpcio.c:813:19: > warning: variable 'status' set but not used [-Wunused-but-set-variable] > rtems_status_code status; > ^~~~~~ > /home/dev/kernel/rtems/c/src/../../cpukit/libfs/src/nfsclient/src/rpcio.c: > In function 'rpcUdpInit': > > /home/dev/kernel/rtems/c/src/../../cpukit/libfs/src/nfsclient/src/rpcio.c:938:15: > error: 'hlock' undeclared (first use in this function); did you mean > 'clock'? > MU_CREAT( &hlock ); > ^ > > /home/dev/kernel/rtems/c/src/../../cpukit/libfs/src/nfsclient/src/rpcio.c:208:54: > note: in definition of macro 'MU_CREAT' > #define MU_CREAT(pmutex) rtems_recursive_mutex_init((pmutex), "RPCl") > ^~~~~~ > > /home/dev/kernel/rtems/c/src/../../cpukit/libfs/src/nfsclient/src/rpcio.c:939:15: > error: 'llock' undeclared (first use in this function); did you mean > 'hlock'? > MU_CREAT( &llock ); > ^ > > /home/dev/kernel/rtems/c/src/../../cpukit/libfs/src/nfsclient/src/rpcio.c:208:54: > note: in definition of macro 'MU_CREAT' > #define MU_CREAT(pmutex) rtems_recursive_mutex_init((pmutex), "RPCl") > ^~~~~~ > > /home/dev/kernel/rtems/c/src/../../cpukit/libfs/src/nfsclient/src/rpcio.c:924:19: > warning: variable 'wkup' set but not used [-Wunused-but-set-variable] > struct sockwakeup wkup; > ^~~~ > > /home/dev/kernel/rtems/c/src/../../cpukit/libfs/src/nfsclient/src/rpcio.c:922:19: > warning: variable 'status' set but not used [-Wunused-but-set-variable] > rtems_status_code status; > ^~~~~~ > > /home/dev/kernel/rtems/c/src/../../cpukit/libfs/src/nfsclient/src/rpcio.c:921:7: > warning: variable 's' set but not used [-Wunused-but-set-variable] > int s; > ^ > /home/dev/kernel/rtems/c/src/../../cpukit/libfs/src/nfsclient/src/rpcio.c: > In function 'rpcio_daemon': > > /home/dev/kernel/rtems/c/src/../../cpukit/libfs/src/nfsclient/src/rpcio.c:1173:12: > error: 'hlock' undeclared (first use in this function); did you mean > 'clock'? > MU_LOCK(hlock); > ^ > > /home/dev/kernel/rtems/c/src/../../cpukit/libfs/src/nfsclient/src/rpcio.c:204:54: > note: in definition of macro 'MU_LOCK' > #define MU_LOCK(mutex) rtems_recursive_mutex_lock(&(mutex)) > ^~~~~ > > /home/dev/kernel/rtems/c/src/../../cpukit/libfs/src/nfsclient/src/rpcio.c:1149:19: > warning: variable 'status' set but not used [-Wunused-but-set-variable] > rtems_status_code status; > ^~~~~~ > /home/dev/kernel/rtems/c/src/../../cpukit/libfs/src/nfsclient/src/rpcio.c: > In function 'rpcUdpXactPoolCreate': > > /home/dev/kernel/rtems/c/src/../../cpukit/libfs/src/nfsclient/src/rpcio.c:1508:19: > warning: variable 'status' set but not used [-Wunused-but-set-variable] > rtems_status_code status; > ^~~~~~ > Makefile:11245: recipe for target 'libfs/src/nfsclient/src/rpcio.o' failed > make[4]: *** [libfs/src/nfsclient/src/rpcio.o] Error 1 > make[4]: Leaving directory > Makefile:1221: recipe for target 'cpukit' failed > make[3]: *** [cpukit] Error 2 > make[3]: Leaving directory > Makefile:715: recipe for target 'all-recursive' failed > make[2]: *** [all-recursive] Error 1 > make[2]: Leaving directory > Makefile:289: recipe for target 'all-recursive' failed > make[1]: *** [all-recursive] Error 1 > make[1]: Leaving directory > Makefile:410: recipe for target 'all-recursive' failed > make: *** [all-recursive] Error 1 > > > Thank you. > Regards, > Aby > -------------- next part -------------- > An HTML attachment was scrubbed... > URL: < > http://lists.rtems.org/pipermail/devel/attachments/20190507/0933795b/attachment-0001.html > > > > ------------------------------ > > Message: 2 > Date: Tue, 7 May 2019 08:58:44 -0500 > From: Joel Sherrill <j...@rtems.org> > To: Aby Tom <abytha...@gmail.com> > Cc: "rtems-de...@rtems.org" <devel@rtems.org> > Subject: Re: RTEMS 5.0 error occurred in 'make' while --enable- tests > are done > Message-ID: > <CAF9ehCUPi0yKAO= > kfgwmafx6chb02chjep3ukfkv36qzncz...@mail.gmail.com> > Content-Type: text/plain; charset="utf-8" > > This BSP builds for me off the master. There are multiple variants within > this > BSP family and various configurations you could have used. Could you > share your configure command? > > Mine was: > > ../rtems/configure --target=arm-rtems5 > --enable-rtemsbsp=tms570ls3137_hdk_sdram > --prefix=/home/joel/rtems-work/tools/5/bsp-install --enable-networking > --enable-posix --disable-smp --disable-multiprocessing > --disable-rtems-debug --disable-profiling --enable-tests --enable-cxx > --enable-maintainer-mode > > > Thanks. > > --joel > > On Tue, May 7, 2019 at 8:44 AM Aby Tom <abytha...@gmail.com> wrote: > > > Hello everyone, > > > > I am new to RTEMS, and was trying to build a new bsp for RTEMS 5 for > > tms570 family of boards. > > > > While doing the make, i come across this error. > > > > I had done --enable-tests in the previous command. > > > > Can anyone help me with this? Output from terminal is shown below. > > > > (.... represent some omitted output results) > > > > ..... > > > > /home/dev/kernel/rtems/c/src/../../cpukit/libfs/src/nfsclient/src/nfs.c: > > In function 'nfs_fsunmount_me': > > > /home/dev/kernel/rtems/c/src/../../cpukit/libfs/src/nfsclient/src/nfs.c:1928:7: > > warning: variable 'status' set but not used [-Wunused-but-set-variable] > > int status; > > ..... > > > > > /home/dev/kernel/rtems/c/src/../../cpukit/libfs/src/nfsclient/src/rpcio.c: > > In function 'rpcUdpServerCreate': > > > /home/dev/kernel/rtems/c/src/../../cpukit/libfs/src/nfsclient/src/rpcio.c:567:11: > > error: 'llock' undeclared (first use in this function); did you mean > > 'clock'? > > MU_LOCK( llock ); > > > > ..... > > > > > /home/dev/kernel/rtems/c/src/../../cpukit/libfs/src/nfsclient/src/rpcio.c:204:54: > > note: in definition of macro 'MU_LOCK' > > #define MU_LOCK(mutex) rtems_recursive_mutex_lock(&(mutex)) > > > > > > > /home/dev/kernel/rtems/c/src/../../cpukit/libfs/src/nfsclient/src/rpcio.c:567:11: > > note: each undeclared identifier is reported only once for each function > it > > appears in > > MU_LOCK( llock ); > > > > ..... > > > > > /home/dev/kernel/rtems/c/src/../../cpukit/libfs/src/nfsclient/src/rpcio.c: > > In function 'rpcUdpXactCreate': > > > /home/dev/kernel/rtems/c/src/../../cpukit/libfs/src/nfsclient/src/rpcio.c:667:11: > > error: 'hlock' undeclared (first use in this function); did you mean > > 'clock'? > > MU_LOCK(hlock); > > ^ > > > /home/dev/kernel/rtems/c/src/../../cpukit/libfs/src/nfsclient/src/rpcio.c:204:54: > > note: in definition of macro 'MU_LOCK' > > #define MU_LOCK(mutex) rtems_recursive_mutex_lock(&(mutex)) > > ^~~~~ > > > /home/dev/kernel/rtems/c/src/../../cpukit/libfs/src/nfsclient/src/rpcio.c: > > In function 'rpcUdpXactDestroy': > > > /home/dev/kernel/rtems/c/src/../../cpukit/libfs/src/nfsclient/src/rpcio.c:711:11: > > error: 'hlock' undeclared (first use in this function); did you mean > > 'clock'? > > MU_LOCK(hlock); > > ^ > > > /home/dev/kernel/rtems/c/src/../../cpukit/libfs/src/nfsclient/src/rpcio.c:204:54: > > note: in definition of macro 'MU_LOCK' > > #define MU_LOCK(mutex) rtems_recursive_mutex_lock(&(mutex)) > > ^~~~~ > > > /home/dev/kernel/rtems/c/src/../../cpukit/libfs/src/nfsclient/src/rpcio.c: > > In function 'rpcUdpRcv': > > > /home/dev/kernel/rtems/c/src/../../cpukit/libfs/src/nfsclient/src/rpcio.c:813:19: > > warning: variable 'status' set but not used [-Wunused-but-set-variable] > > rtems_status_code status; > > ^~~~~~ > > > /home/dev/kernel/rtems/c/src/../../cpukit/libfs/src/nfsclient/src/rpcio.c: > > In function 'rpcUdpInit': > > > /home/dev/kernel/rtems/c/src/../../cpukit/libfs/src/nfsclient/src/rpcio.c:938:15: > > error: 'hlock' undeclared (first use in this function); did you mean > > 'clock'? > > MU_CREAT( &hlock ); > > ^ > > > /home/dev/kernel/rtems/c/src/../../cpukit/libfs/src/nfsclient/src/rpcio.c:208:54: > > note: in definition of macro 'MU_CREAT' > > #define MU_CREAT(pmutex) rtems_recursive_mutex_init((pmutex), "RPCl") > > ^~~~~~ > > > /home/dev/kernel/rtems/c/src/../../cpukit/libfs/src/nfsclient/src/rpcio.c:939:15: > > error: 'llock' undeclared (first use in this function); did you mean > > 'hlock'? > > MU_CREAT( &llock ); > > ^ > > > /home/dev/kernel/rtems/c/src/../../cpukit/libfs/src/nfsclient/src/rpcio.c:208:54: > > note: in definition of macro 'MU_CREAT' > > #define MU_CREAT(pmutex) rtems_recursive_mutex_init((pmutex), "RPCl") > > ^~~~~~ > > > /home/dev/kernel/rtems/c/src/../../cpukit/libfs/src/nfsclient/src/rpcio.c:924:19: > > warning: variable 'wkup' set but not used [-Wunused-but-set-variable] > > struct sockwakeup wkup; > > ^~~~ > > > /home/dev/kernel/rtems/c/src/../../cpukit/libfs/src/nfsclient/src/rpcio.c:922:19: > > warning: variable 'status' set but not used [-Wunused-but-set-variable] > > rtems_status_code status; > > ^~~~~~ > > > /home/dev/kernel/rtems/c/src/../../cpukit/libfs/src/nfsclient/src/rpcio.c:921:7: > > warning: variable 's' set but not used [-Wunused-but-set-variable] > > int s; > > ^ > > > /home/dev/kernel/rtems/c/src/../../cpukit/libfs/src/nfsclient/src/rpcio.c: > > In function 'rpcio_daemon': > > > /home/dev/kernel/rtems/c/src/../../cpukit/libfs/src/nfsclient/src/rpcio.c:1173:12: > > error: 'hlock' undeclared (first use in this function); did you mean > > 'clock'? > > MU_LOCK(hlock); > > ^ > > > /home/dev/kernel/rtems/c/src/../../cpukit/libfs/src/nfsclient/src/rpcio.c:204:54: > > note: in definition of macro 'MU_LOCK' > > #define MU_LOCK(mutex) rtems_recursive_mutex_lock(&(mutex)) > > ^~~~~ > > > /home/dev/kernel/rtems/c/src/../../cpukit/libfs/src/nfsclient/src/rpcio.c:1149:19: > > warning: variable 'status' set but not used [-Wunused-but-set-variable] > > rtems_status_code status; > > ^~~~~~ > > > /home/dev/kernel/rtems/c/src/../../cpukit/libfs/src/nfsclient/src/rpcio.c: > > In function 'rpcUdpXactPoolCreate': > > > /home/dev/kernel/rtems/c/src/../../cpukit/libfs/src/nfsclient/src/rpcio.c:1508:19: > > warning: variable 'status' set but not used [-Wunused-but-set-variable] > > rtems_status_code status; > > ^~~~~~ > > Makefile:11245: recipe for target 'libfs/src/nfsclient/src/rpcio.o' > failed > > make[4]: *** [libfs/src/nfsclient/src/rpcio.o] Error 1 > > make[4]: Leaving directory > > Makefile:1221: recipe for target 'cpukit' failed > > make[3]: *** [cpukit] Error 2 > > make[3]: Leaving directory > > Makefile:715: recipe for target 'all-recursive' failed > > make[2]: *** [all-recursive] Error 1 > > make[2]: Leaving directory > > Makefile:289: recipe for target 'all-recursive' failed > > make[1]: *** [all-recursive] Error 1 > > make[1]: Leaving directory > > Makefile:410: recipe for target 'all-recursive' failed > > make: *** [all-recursive] Error 1 > > > > > > Thank you. > > Regards, > > Aby > > _______________________________________________ > > devel mailing list > > devel@rtems.org > > http://lists.rtems.org/mailman/listinfo/devel > -------------- next part -------------- > An HTML attachment was scrubbed... > URL: < > http://lists.rtems.org/pipermail/devel/attachments/20190507/15d73ec9/attachment.html > > > > ------------------------------ > > Subject: Digest Footer > > _______________________________________________ > devel mailing list > devel@rtems.org > http://lists.rtems.org/mailman/listinfo/devel > > ------------------------------ > > End of devel Digest, Vol 90, Issue 37 > ************************************* >
_______________________________________________ devel mailing list devel@rtems.org http://lists.rtems.org/mailman/listinfo/devel
