On Tue, Feb 26, 2019 at 1:28 PM Jiri Gaisler <j...@gaisler.se> wrote:
> > On 2/26/19 8:08 PM, Joel Sherrill wrote: > > Hi > > > > I think something is wrong with sis on the leon3 which is impacting > rtems-tester. > > ticker ends like this: > > > > TA1 - rtems_clock_get_tod - 09:00:34 12/31/1988 > > > > *** END OF TEST CLOCK TICK ***[joel@ > > > > Notice that there is no carriage return at the end. Hello ends with a CR > and an > > blank line and it passes. Similar issue on the tests I picked which > passed or failed. > > > > Any idea what's up? I assume something isn't quite right after all the > sis work > > since it is reproducible. > > > Works OK here on Ubuntu 18.04.2 x64. Which host O/S are you on? > Interesting. OS is: CentOS Linux release 7.5.1804 (Core) Here is the output of my last run by hand with a subsequent comment. Notice that =================================== [joel@rtbf64c b-leon3]$ sparc-rtems5-run -a -leon3 ./sparc-rtems5/c/leon3/testsuites/sptests/sp05.exe *** BEGIN OF TEST SP 5 *** *** TEST VERSION: 5.0.0.7abc497b6c763ccdc090014f310951b17c742ae9 *** TEST STATE: EXPECTED-PASS *** TEST BUILD: RTEMS_NETWORKING *** TEST TOOLS: 7.4.0 20181206 (RTEMS 5, RSB 38241392a4f96dabf2d1aba51a43dcb623db4dfb, Newlib 1d35a003f) TA1 - rtems_task_wake_after - sleep 5 seconds TA2 - rtems_task_suspend - suspend self TA3 - rtems_task_suspend - suspend self ...... TA1 - rtems_task_resume - resume TA3 *** END OF TEST [joel@rtbf64c b-leon3]$ cat /etc/redhat-release CentOS Linux release 7.5.1804 (Core) =================================== And this is the end of the erc32 output from the same test and same sis on the same computer: =================================== TA1 - rtems_task_resume - resume TA3 *** END OF TEST SP 5 *** *** FATAL *** fatal source: 5 (RTEMS_FATAL_SOURCE_EXIT) fatal code: 0 (0x00000000) RTEMS version: 5.0.0.7abc497b6c763ccdc090014f310951b17c742ae9 RTEMS tools: 7.4.0 20181206 (RTEMS 5, RSB 38241392a4f96dabf2d1aba51a43dcb623db4dfb, Newlib 1d35a003f) =================================== Looks like a lot of output got chopped or not flushed or something. If the final output makes it out on your system, then rtems-test will be happy and pass them. In my case, it ends most of the time just a little too early to make that happen. > > jiri@office:~/src/rtems/sparc$ rtems-test --rtems-bsp=leon3-sis > sparc-rtems5/c/leon3/testsuites/samples > RTEMS Testing - Tester, 5.0.not_released > Command Line: /opt/rtems/5/bin/rtems-test --rtems-bsp=leon3-sis > sparc-rtems5/c/leon3/testsuites/samples > Python: 3.6.7 (default, Oct 22 2018, 11:32:17) [GCC 8.2.0] > Host: Linux-4.18.0-15-generic-x86_64-with-Ubuntu-18.04-bionic (Linux > office 4.18.0-15-generic #16~18.04.1-Ubuntu SMP Thu Feb 7 14:06:04 UTC 2019 > x86_64 x86_64) > [ 8/13] p:0 f:0 u:0 e:0 I:0 B:0 t:0 i:0 W:0 | sparc/leon3: > minimum.exe > [ 6/13] p:0 f:0 u:0 e:0 I:0 B:0 t:0 i:0 W:0 | sparc/leon3: > hello.exe > [ 4/13] p:0 f:0 u:0 e:0 I:0 B:0 t:0 i:0 W:0 | sparc/leon3: > cxx_iostream.exe > [ 2/13] p:0 f:0 u:0 e:0 I:0 B:0 t:0 i:0 W:0 | sparc/leon3: > capture.exe > [ 3/13] p:0 f:0 u:0 e:0 I:0 B:0 t:0 i:0 W:0 | sparc/leon3: > cdtest.exe > [ 1/13] p:0 f:0 u:0 e:0 I:0 B:0 t:0 i:0 W:0 | sparc/leon3: > base_sp.exe > [ 5/13] p:0 f:0 u:0 e:0 I:0 B:0 t:0 i:0 W:0 | sparc/leon3: > fileio.exe > [ 7/13] p:0 f:0 u:0 e:0 I:0 B:0 t:0 i:0 W:0 | sparc/leon3: > loopback.exe > [ 1/13] p:0 f:0 u:0 e:0 I:0 B:0 t:0 i:0 W:0 | sparc/leon3: > base_sp.exe > [ 2/13] p:0 f:0 u:0 e:0 I:0 B:0 t:0 i:0 W:0 | sparc/leon3: > capture.exe > [ 3/13] p:0 f:0 u:0 e:0 I:0 B:0 t:0 i:0 W:0 | sparc/leon3: > cdtest.exe > [ 4/13] p:0 f:0 u:0 e:0 I:0 B:0 t:0 i:0 W:0 | sparc/leon3: > cxx_iostream.exe > [ 5/13] p:0 f:0 u:0 e:0 I:0 B:0 t:0 i:0 W:0 | sparc/leon3: > fileio.exe > [ 6/13] p:0 f:0 u:0 e:0 I:0 B:0 t:0 i:0 W:0 | sparc/leon3: > hello.exe > [ 7/13] p:0 f:0 u:0 e:0 I:0 B:0 t:0 i:0 W:0 | sparc/leon3: > loopback.exe > [ 8/13] p:0 f:0 u:0 e:0 I:0 B:0 t:0 i:0 W:0 | sparc/leon3: > minimum.exe > [10/13] p:6 f:0 u:2 e:0 I:0 B:0 t:0 i:0 W:0 | sparc/leon3: > paranoia.exe > [11/13] p:6 f:0 u:2 e:0 I:0 B:0 t:0 i:0 W:0 | sparc/leon3: > pppd.exe > [13/13] p:6 f:0 u:2 e:0 I:0 B:0 t:0 i:0 W:0 | sparc/leon3: > unlimited.exe > [ 9/13] p:6 f:0 u:2 e:0 I:0 B:0 t:0 i:0 W:0 | sparc/leon3: > nsecs.exe > [12/13] p:6 f:0 u:2 e:0 I:0 B:0 t:0 i:0 W:0 | sparc/leon3: > ticker.exe > [ 9/13] p:6 f:0 u:2 e:0 I:0 B:0 t:0 i:0 W:0 | sparc/leon3: > nsecs.exe > [10/13] p:6 f:0 u:2 e:0 I:0 B:0 t:0 i:0 W:0 | sparc/leon3: > paranoia.exe > [11/13] p:6 f:0 u:2 e:0 I:0 B:0 t:0 i:0 W:0 | sparc/leon3: > pppd.exe > [12/13] p:6 f:0 u:2 e:0 I:0 B:0 t:0 i:0 W:0 | sparc/leon3: > ticker.exe > [13/13] p:6 f:0 u:2 e:0 I:0 B:0 t:0 i:0 W:0 | sparc/leon3: > unlimited.exe > > Passed: 11 > Failed: 0 > User Input: 2 > Expected Fail: 0 > Indeterminate: 0 > Benchmark: 0 > Timeout: 0 > Invalid: 0 > Wrong Version: 0 > Wrong Build: 0 > Wrong Tools: 0 > ----------------- > Total: 13 > User Input: > capture.exe > fileio.exe > Average test time: 0:00:00.212905 > Testing time : 0:00:02.767759 > jiri@office:~/src/rtems/sparc$ sparc-rtems5-sis > > SIS - SPARC/RISCV instruction simulator 2.12, copyright Jiri Gaisler 2019 > Bug-reports to j...@gaisler.se > > ERC32 emulation enabled > > sis> q > > Jiri. >
_______________________________________________ devel mailing list devel@rtems.org http://lists.rtems.org/mailman/listinfo/devel
