On 22/8/18 12:24 am, Joel Sherrill wrote: > Ignoring the epiphany failures (it shouldn't even attempt to > build networking but I can't seem to find the .ini syntax to address > that),
What happens if you add 'networking' to the 'exclude' line in this file .. https://git.rtems.org/rtems-tools/tree/tester/rtems/rtems-bsps-epiphany.ini#n25 ? > the following results > > https://lists.rtems.org/pipermail/build/2018-August/000903.html > > have some failures I don't seem to be able to reproduce by > hand. For example, number 9 is one of the set for SPARC BSPs. > > 9 smp-debug sparc/gr712rc build: > configure: /home/joel/rtems-work/rtems/configure --target=sparc-\ > rtems5 --enable-rtemsbsp=gr712rc --prefix=/home/joel/rtems-work/bsps\ > --enable-rtems-debug --enable-smp > error: bsps/sparc/shared/start/start.S:313 Error: Unknown opcode: > `mv' > > I can't reproduce that by hand. I also tried an m32c failure but couldn't > reproduce it either. > > Help is appreciated. I suggest you check the build output for the different build to see what is different. Maybe a diff of the top level config.status may show something. Chris _______________________________________________ devel mailing list devel@rtems.org http://lists.rtems.org/mailman/listinfo/devel