The MMU is disabled right now because I am tracking down a problem (not related to LIBBSD). I was going to turn it back on after I solve that issue.
I'm using a 1ms tick. Kevin Kirspel Electrical Engineer - Sr. Staff Idexx Roswell 235 Hembree Park Drive Roswell GA 30076 Tel: (770)-510-4444 ext. 81642 Direct: (770)-688-1642 Fax: (770)-510-4445 -----Original Message----- From: Sebastian Huber [mailto:sebastian.hu...@embedded-brains.de] Sent: Monday, July 03, 2017 1:47 AM To: Kirspel, Kevin <kevin-kirs...@idexx.com>; devel@rtems.org Subject: Re: LIBBSD On 30/06/17 20:08, Kirspel, Kevin wrote: > Case #2: Enable the RTEMS callout timer but do not call "callout_process()" > (the timer service routine just resets the timer and quits) . > IDLE Task CPUUSE: 93.144% > TIME Task CPUUSE: 6.282% In this case you have some low-level problem on your target. Is the cache enabled and properly set up in the MMU? How many ticks per second do you use? -- Sebastian Huber, embedded brains GmbH Address : Dornierstr. 4, D-82178 Puchheim, Germany Phone : +49 89 189 47 41-16 Fax : +49 89 189 47 41-09 E-Mail : sebastian.hu...@embedded-brains.de PGP : Public key available on request. Diese Nachricht ist keine geschäftliche Mitteilung im Sinne des EHUG. _______________________________________________ devel mailing list devel@rtems.org http://lists.rtems.org/mailman/listinfo/devel
