On 01/06/2017 10:43, Chris Johns wrote:
> On 01/06/2017 07:33, Sebastian Huber wrote:
>>
>> Could you please use Binutils 2.28 for PowerPC. I will fix the bootloader
>> after the RSB update.
>>
>
> Oops, I pushed the patch while taking with Joel before I saw this. Can you
> please undo the change when fixing the problem in the bootloader?
>
> I am sorry about this, it is my mistake.
>
Fix on the RSB master. Tested with:
$ rtems-bsp-builder --rtems-tools=/build/rtems/tools/4.12-7.1 \
--rtems=/opt/work/chris/rtems/kernel/rtems.git --log=powerpc-7.1 \
--arch=powerpc --build=standard --jobs=7/6
Results summary:
Total: Warnings:2410 exes:582 objs:74236 libs:3500
Failures:
1 standard powerpc/mcp750 build:
configure: /opt/work/chris/rtems/kernel/rtems.git/configure --target\
=powerpc-rtems4.12 --enable-rtemsbsp=mcp750 --prefix=/opt/rtems/4.12
2 standard powerpc/mtx603e build:
configure: /opt/work/chris/rtems/kernel/rtems.git/configure --target\
=powerpc-rtems4.12 --enable-rtemsbsp=mtx603e\
--prefix=/opt/rtems/4.12
3 standard powerpc/mvme2100 build:
configure: /opt/work/chris/rtems/kernel/rtems.git/configure --target\
=powerpc-rtems4.12 --enable-rtemsbsp=mvme2100\
--prefix=/opt/rtems/4.12
4 standard powerpc/mvme2307 build:
configure: /opt/work/chris/rtems/kernel/rtems.git/configure --target\
=powerpc-rtems4.12 --enable-rtemsbsp=mvme2307\
--prefix=/opt/rtems/4.12
5 standard powerpc/qemuprep-altivec build:
configure: /opt/work/chris/rtems/kernel/rtems.git/configure --target\
=powerpc-rtems4.12 --enable-rtemsbsp=qemuprep-altivec\
--prefix=/opt/rtems/4.12
6 standard powerpc/qemuprep build:
configure: /opt/work/chris/rtems/kernel/rtems.git/configure --target\
=powerpc-rtems4.12 --enable-rtemsbsp=qemuprep\
--prefix=/opt/rtems/4.12
Average BSP Build Time: 0:00:19.086596
Total Time 0:15:16.156621
Passes: 42 Failures: 6
Chris
_______________________________________________
devel mailing list
devel@rtems.org
http://lists.rtems.org/mailman/listinfo/devel
