After some finagling, I was successful using the RTEMS tester, GDB, and an ARM Jlink JTAG cable to run the sptests under the testsuite. I passed all but 8. 3 of the tests actually passed but have some issues with the test cases or output parser. The 5 remaining failures should have nothing to do with the VFP additions so I’m pretty confident it is fine. I’ll post the patches for review. They are pretty minor.
Kevin Kirspel Electrical Engineer - Sr. Staff Opti Medical 235 Hembree Park Drive Roswell GA 30076 Tel: (770)-510-4444 ext. 81642 Direct: (770)-688-1642 Fax: (770)-510-4445 From: Joel Sherrill [mailto:joel.sherr...@gmail.com] Sent: Wednesday, August 17, 2016 3:06 PM To: Kirspel, Kevin <kevin-kirs...@idexx.com>; Chris Johns <chr...@rtems.org> Cc: devel@rtems.org Subject: Re: VFP support for lpc32xx On Wed, Aug 17, 2016 at 2:04 PM, Kirspel, Kevin <kevin-kirs...@idexx.com<mailto:kevin-kirs...@idexx.com>> wrote: I have a patch for the RTEMS source builder as well as RTEMS itself to support the VFP on the lpc32xx. I don’t have hardware the matches the lpc32xx BSP but I do have some custom hardware that I can run the test suite on. Can you point me to some documentation that tells you how to automate the running of the test suite? If you have JTAG on your HW, the rtems-tester in rtems-tools has setup to run tests on Zynq automated using gdb and JTAG. Chris Johns should speak up. Kevin Kirspel Electrical Engineer - Sr. Staff Opti Medical 235 Hembree Park Drive Roswell GA 30076 Tel: (770)-510-4444 ext. 81642<tel:%28770%29-510-4444%20ext.%2081642> Direct: (770)-688-1642<tel:%28770%29-688-1642> Fax: (770)-510-4445<tel:%28770%29-510-4445> _______________________________________________ devel mailing list devel@rtems.org<mailto:devel@rtems.org> http://lists.rtems.org/mailman/listinfo/devel
_______________________________________________ devel mailing list devel@rtems.org http://lists.rtems.org/mailman/listinfo/devel
