Dear Deval Shah, I checked my rasberry board. my board is rasberry Pi B+. (It is not RPI2 B+) I am sorry. I returned to rtems, libbsd version for Pi B+.
Anyway, I guess that both bcm283x_dwc_otg_probe() and bcm283x_dwc_otg_attach() function should be called. I don't know how to call bcm283x_dwc_otg_probe() and bcm283x_dwc_otg_attach(). Please advsie me. Best Regards, Thomas Kim. 2016-08-10 22:06 GMT+09:00 Deval Shah <deval.ma...@gmail.com>: > I saw the files which you have attached. I found one quick mistake. > > In your nexus-devices.h file "RTEMS_BSD_DRIVER_BCM283X_DWCOTG(0x20980000, > 17);", base and irq used are wrong. I had corrected the irq in my other > commit. They will be 0x3F980000 (since you are using Raspberry pi 2) and 9. > > It would be easier to use the macros. i.e. > RTEMS_BSD_DRIVER_BCM283X_DWCOTG(BCM2835_USB_BASE, BCM2835_IRQ_ID_USB); > > > ᐧ > > On Wed, Aug 10, 2016 at 1:11 PM, Thomas Kim <thomas73....@gmail.com> > wrote: > >> Dear Deval Shah, >> >> Thank you very much for your reply. >> I checked this again. >> Because there is not your code in currrent git system, I patched your >> code in current libbsd code. >> As I know in current libbsd source tree, your nexus_devices.h should be >> sperated into rtems-bsd-nexus-bus.h. I attached this. >> >> First of all, I completed to test RTEMS testsuites/sample/ticker.exe on >> RPI2 B+ board. >> I am tring to test rtems-libbsd/rtemsbsd/testsuite/usb01. >> also, I try to test two cases in usb01/init.c >> case 1 does not include NEED_USB_EHCI. case 2 include NEED_USB_EHCI. >> >> #if defined(LIBBSP_ARM_LPC24XX_BSP_H) || defined(LIBBSP_ARM_LPC32XX_BSP >> _H) >> #define NEED_USB_OHCI >> (CASE1) #elif defined(__GEN83xx_BSP_h) || defined(LIBBSP_POWERPC_QORIQ_B >> SP_H) >> (CASE2) #elif defined(__GEN83xx_BSP_h) || defined(LIBBSP_ARM_RASPBERRYPI >> _BSP_H) >> #define NEED_USB_EHCI >> #endif >> SYSINIT_NEED_USB_CORE; >> #ifdef NEED_USB_OHCI >> SYSINIT_NEED_USB_OHCI; >> #endif >> #ifdef NEED_USB_EHCI >> SYSINIT_NEED_USB_EHCI; >> #endif >> >> also, I added "#define VERBOSE_SYSINIT 1" in init_main.c for checking >> SYS_INIT functional call. >> >> At this time, usb_quirk_init() only is called when I test two cases. >> I attached serial log file, too. >> >> Please let me know my missing point. >> >> Best Regards, >> JunBeom >> >> 2016-08-10 5:31 GMT+09:00 Deval Shah <deval.ma...@gmail.com>: >> >>> Hello Thomas Kim, >>> >>> It is the same code which you downloaded will work for the raspberry pi. >>> You can test the libbsd version of raspberry pi by configuring waf with the >>> following arguments. >>> >>> waf configure --prefix=/opt/rtems/4.12/bsps \ >>> --rtems=/opt/rtems/4.12/bsps \ >>> --rtems-tools=/opt/rtems/4.12/tools \ >>> --rtems-bsps=arm/raspberrypi >>> >>> You can find more at this link. https://git.rtems.org/rt >>> ems-libbsd/tree/README.waf >>> >>> Deval Shah >>> >>> ᐧ >>> >>> On Tue, Aug 9, 2016 at 11:48 AM, Thomas Kim <thomas73....@gmail.com> >>> wrote: >>> >>>> Dear Sir, >>>> >>>> I am sorry. >>>> >>>> I want to test this libbsd version for Rasberry Pi. >>>> When I check "git://git.rtems.org/rtems-libbsd.git", there is not any >>>> code for Rasberry pi. >>>> >>>> Please could you let me know git URL for downloading this libbsd >>>> version ? >>>> >>>> Best Regards, >>>> Thomas Kim >>>> >>>> 2016-08-09 14:52 GMT+09:00 Sebastian Huber < >>>> sebastian.hu...@embedded-brains.de>: >>>> >>>>> From which FreeBSD version are these files? >>>>> >>>>> On 05/08/16 18:32, Deval Shah wrote: >>>>> >>>>>> --- >>>>>> freebsd/sys/arm/broadcom/bcm2835/bcm283x_dwc_fdt.c | 127 >>>>>> ++++++++++++ >>>>>> freebsd/sys/dev/usb/controller/dwc_otg_fdt.c | 228 >>>>>> +++++++++++++++++++++ >>>>>> freebsd/sys/dev/usb/controller/dwc_otg_fdt.h | 39 ++++ >>>>>> libbsd.py | 3 + >>>>>> libbsd_waf.py | 4 +- >>>>>> rtemsbsd/include/bsp/nexus-devices.h | 21 ++ >>>>>> 6 files changed, 421 insertions(+), 1 deletion(-) >>>>>> create mode 100644 freebsd/sys/arm/broadcom/bcm28 >>>>>> 35/bcm283x_dwc_fdt.c >>>>>> create mode 100644 freebsd/sys/dev/usb/controller/dwc_otg_fdt.c >>>>>> create mode 100644 freebsd/sys/dev/usb/controller/dwc_otg_fdt.h >>>>>> >>>>> >>>>> -- >>>>> Sebastian Huber, embedded brains GmbH >>>>> >>>>> Address : Dornierstr. 4, D-82178 Puchheim, Germany >>>>> Phone : +49 89 189 47 41-16 >>>>> Fax : +49 89 189 47 41-09 >>>>> E-Mail : sebastian.hu...@embedded-brains.de >>>>> PGP : Public key available on request. >>>>> >>>>> Diese Nachricht ist keine geschäftliche Mitteilung im Sinne des EHUG. >>>>> >>>>> _______________________________________________ >>>>> devel mailing list >>>>> devel@rtems.org >>>>> http://lists.rtems.org/mailman/listinfo/devel >>>>> >>>> >>>> >>> >>> >>> -- >>> Deval Shah >>> Graduate Student, >>> B.E. (Hons.) Electrical and Electronics Engineering >>> BITS Pilani Hyderabad Campus <http://www.bits-pilani.ac.in/hyderabad/> >>> >>> Github Profile <https://github.com/deval-maker> >>> >> >> > > > -- > Deval Shah > Graduate Student, > B.E. (Hons.) Electrical and Electronics Engineering > BITS Pilani Hyderabad Campus <http://www.bits-pilani.ac.in/hyderabad/> > > Github Profile <https://github.com/deval-maker> >
_______________________________________________ devel mailing list devel@rtems.org http://lists.rtems.org/mailman/listinfo/devel
