Hi everyone, I would be like to fine tune my application.
The link to my proposal is as follows : https://docs.google.com/document/d/1Ajhs7op7vLUYFeVZnjAaIhB2CNawvhQOMVtGtivOUtg/edit# It would be great if people could provide me insights/constructive criticism. Thanks Mudit On Mar 26, 2016 3:47 PM, "Mudit Jain" <muditjain18011...@gmail.com> wrote: > Hi all, > > I had completed the GSoC application successfully and also the basic setup > of the RTEMS environment ready. > > A big thanks to everyone who gave me inputs even though it I applied at > the last moment. :) > > The link to my proposal is as follows : > > https://docs.google.com/document/d/1Ajhs7op7vLUYFeVZnjAaIhB2CNawvhQOMVtGtivOUtg/edit# > > Thanks > Mudit Jain > > > > On Fri, Mar 25, 2016 at 9:49 PM, Gedare Bloom <ged...@rtems.org> wrote: > >> On Fri, Mar 25, 2016 at 11:46 AM, Joel Sherrill <j...@rtems.org> wrote: >> > Great! Remember today is the deadline to get the Google application in >> with >> > the PDF of your proposal. Do your best and we will work to fine tune it >> > assuming you meet the Google deadline. >> > >> Not just today, but I think it is in 2.5 hours or so. >> >> > Please update the table of students (you need a Trac/wiki account to do >> > this) and include a link to your proposal in Google docs. >> > >> This can be completed after Google's deadline, but must be done. >> >> > The Pi2 should be an interesting project. Last year's student got stuck >> on >> > SMP support. That is important to get working so we have a cheap 4-core >> ARM >> > reference target, >> > >> > --joel >> > >> > On Fri, Mar 25, 2016 at 10:25 AM, Mudit Jain < >> muditjain18011...@gmail.com> >> > wrote: >> >> >> >> PFA patch and a screen shot as a proof of having completed the >> environment >> >> setup. >> >> I have made an initial draft of the application. Will be updating the >> >> google portal and the site soon. >> >> >> >> Thanks >> >> Mudit >> >> >> >> On Fri, Mar 25, 2016 at 6:16 PM, Gedare Bloom <ged...@rtems.org> >> wrote: >> >>> >> >>> OK, that should be a good set for your proposal. I'm not sure what the >> >>> status is for Pi2 now. It may need some cleanup. Make sure you get >> >>> your final PDF and enrollment submitted today. >> >>> >> >>> Please keep devel on any emails of non-private nature. >> >>> >> >>> On Fri, Mar 25, 2016 at 8:33 AM, Mudit Jain < >> muditjain18011...@gmail.com> >> >>> wrote: >> >>> > Hi Gedare, >> >>> > >> >>> > I have read the link that you have suggested and it has provided me >> a >> >>> > good >> >>> > insight into the matter. >> >>> > >> >>> > I planned on implementing the support for Pi 2/B >> >>> > >> >>> > In addition to the SD file system support I also plan on adding DMA >> >>> > support >> >>> > for I2C and SPI, >> >>> > support for second SPI device and model identification, detection >> and >> >>> > reporting. >> >>> > >> >>> > Thanks >> >>> > >> >>> > >> >>> > >> >>> > On Fri, Mar 25, 2016 at 5:23 PM, Gedare Bloom <ged...@rtems.org> >> wrote: >> >>> >> >> >>> >> For prior effort on SD card see >> >>> >> >> >>> >> >> >>> >> >> https://devel.rtems.org/wiki/GSoC/2015/RaspberryPi_peripherals_and_SD_card#SDcardsupport >> >>> >> >> >>> >> There is another student that is planning to add USB/NIC support. >> You >> >>> >> would be best served to avoid too much overlap, but if you go for a >> >>> >> different RPi model that may not matter. What specific RPi board do >> >>> >> you plan to use? >> >>> >> >> >>> >> I would guess SD card is only good for the first half of GSoC, so >> >>> >> you'll need to identify what else you could do. The other >> periperhals >> >>> >> (GPIO, i2c, SPI) support have been merged by Andre. >> >>> >> >> >>> >> On Fri, Mar 25, 2016 at 6:01 AM, Mudit Jain >> >>> >> <muditjain18011...@gmail.com> >> >>> >> wrote: >> >>> >> > Hi everyone, >> >>> >> > >> >>> >> > I am Mudit Jain, a final year undergraduate student in >> Electronics >> >>> >> > and >> >>> >> > Communication Engineering at BITS Pilani Hyderabad Campus. >> >>> >> > >> >>> >> > I wish to apply for GSOC 2016, with RTEMS as the mentoring >> >>> >> > organization. >> >>> >> > >> >>> >> > I have gone through your website for details regarding the >> >>> >> > development >> >>> >> > process and the projects that could be done. >> >>> >> > >> >>> >> > I am interested in working on the project titled "Low Level >> >>> >> > Peripherals >> >>> >> > and >> >>> >> > SD Card Support for Raspberry PI " [ Project group 1 - Improving >> >>> >> > Raspberry >> >>> >> > PI BSP ] under Alan Cudmore as the mentor. >> >>> >> > >> >>> >> > Given the limited time I have for the application process, I have >> >>> >> > parallelly >> >>> >> > started to set up the RTEMS environment and also write my >> proposal >> >>> >> > for >> >>> >> > the >> >>> >> > project that I am interested in. >> >>> >> > I will be updating this email thread once I have set up the env. >> >>> >> > >> >>> >> > I understand that I am applying at the last moment, however I >> >>> >> > request >> >>> >> > you to >> >>> >> > consider my application. >> >>> >> > >> >>> >> > It would be great if people could suggest any good points that I >> >>> >> > need to >> >>> >> > account for, in my application. >> >>> >> > >> >>> >> > Thanks >> >>> >> > >> >>> >> > Cheers >> >>> >> > Mudit Jain >> >>> >> > >> >>> >> > >> >>> >> > >> >>> >> > _______________________________________________ >> >>> >> > devel mailing list >> >>> >> > devel@rtems.org >> >>> >> > http://lists.rtems.org/mailman/listinfo/devel >> >>> > >> >>> > >> >> >> >> >> >> >> >> _______________________________________________ >> >> devel mailing list >> >> devel@rtems.org >> >> http://lists.rtems.org/mailman/listinfo/devel >> > >> > >> > >
_______________________________________________ devel mailing list devel@rtems.org http://lists.rtems.org/mailman/listinfo/devel
