Hi everyone,
I'm using the GPIO api for the BBB but I'm having problems with the
interrupt handling.
I'm blinking two leds in the main thread and I have a GPIO input with an
interrupt attached that uses printk to print a message. The problem is that
the interrupt handler prints the message but never returns (main thread
leds stop blinking after that).
Any suggestion?
Here's my code:
rtems_gpio_irq_state gpio_handler(void* /*arg*/)
{
printk("interrupt handler\n");
return IRQ_HANDLED;
}
void* POSIX_Init(void*)
{
rtems_mode previous_mode_set;
rtems_task_mode(RTEMS_TIMESLICE | RTEMS_PREEMPT, RTEMS_TIMESLICE_MASK |
RTEMS_PREEMPT_MASK, &previous_mode_set);
rtems_status_code sc = rtems_gpio_initialize();
printk("%d\n", sc);
sc = rtems_gpio_request_pin(BBB_LED_USR0, DIGITAL_OUTPUT, true, false,
NULL);
printk("DIGITAL_OUTPUT: %d\n", sc);
sc = rtems_gpio_request_pin(BBB_LED_USR3, DIGITAL_OUTPUT, true, false,
NULL);
printk("DIGITAL_OUTPUT: %d\n", sc);
sc = rtems_gpio_request_pin(BBB_P8_7, DIGITAL_INPUT, false, false,
NULL);
printk("DIGITAL_INPUT: %d\n", sc);
sc = rtems_gpio_enable_interrupt(BBB_P8_7, FALLING_EDGE,
UNIQUE_HANDLER, false, gpio_handler, NULL);
printk("interrupt install: %d\n", sc);
while(1)
{
sleep(1);
rtems_gpio_clear(BBB_LED_USR3);
rtems_gpio_set(BBB_LED_USR0);
sleep(1);
rtems_gpio_set(BBB_LED_USR3);
rtems_gpio_clear(BBB_LED_USR0);
}
return NULL;
}
Thanks in advance!
--
<http://www.tallertechnologies.com>
Federico Garcia Cruz
Software Engineer
San Lorenzo 47, 3rd Floor, Office 5
Córdoba, Argentina
Phone: +54 351 4217888 / +54 351 4218211
<http://www.linkedin.com/company/taller-technologies>
<https://www.facebook.com/tallertechnologies>
_______________________________________________
devel mailing list
devel@rtems.org
http://lists.rtems.org/mailman/listinfo/devel
