Having a floating point configuration of the BSP makes sense. I was able to rebuild the BSP with the hardware floating point compiler option and it works.
I did get a floating point exception in the FTP task and had to change the FTP task create to enable floating point. Is it worth submitting a patch to change that? Thanks, Alan On 8/31/15, 2:40 AM, "Sebastian Huber" <sebastian.hu...@embedded-brains.de> wrote: >Hello Alan, > >I am not sure how Gaisler manages this in their RCC, but I think for >standard RTEMS we need additional BSPs (e.g. via leon3_fp.cfg and >ngmp_fp.cfg configuration files). > >On 17/08/15 17:29, Cudmore, Alan P. (GSFC-5820) wrote: >> Hi, >> We are currently trying to use the leon3 BSP for RTEMS 4.11. >> We have used the 4.10 RCC/Gaisler tools with the Driver Manager in the >> past, but we would like to be on 4.11 for the SMP support. >> >> When I build the 4.11 leon3 BSP, I seem to only have soft-float >> support. When I try to build with the ‹enable-multilib configure >> switch, the build fails. Before I start trying to determine the cause >> of the compile failure, I wanted to make sure I am enabling floating >> point support for the LEON3 correctly. >> >> Thanks, >> Alan >> >> >> >> >> _______________________________________________ >> devel mailing list >> devel@rtems.org >> http://lists.rtems.org/mailman/listinfo/devel > >-- >Sebastian Huber, embedded brains GmbH > >Address : Dornierstr. 4, D-82178 Puchheim, Germany >Phone : +49 89 189 47 41-16 >Fax : +49 89 189 47 41-09 >E-Mail : sebastian.hu...@embedded-brains.de >PGP : Public key available on request. > >Diese Nachricht ist keine geschäftliche Mitteilung im Sinne des EHUG. > _______________________________________________ devel mailing list devel@rtems.org http://lists.rtems.org/mailman/listinfo/devel
