Welcome Hardik Patel, Unfortunately there is not enough information in your post to help determine why the build has failed. If you can post or pastebin the full log, that would be helpful. Include the results from configure and from make.
Gedare On Fri, Aug 21, 2015 at 2:19 AM, Hardik Patel <[email protected]> wrote: > Hello Everyone...My name is hardik patel. I have started work on BSP > improvement of RTEMS for beaglebone black. After Building RSB , When I am > building RTEMS using make i face error...please help me..thanks you > > Making all in arm-rtems4.11/c > make[1]: Entering directory > `/home/hardik/development/rtems/b-beagle/arm-rtems4.11/c' > Making all in . > make[2]: Entering directory > `/home/hardik/development/rtems/b-beagle/arm-rtems4.11/c' > make[2]: Nothing to be done for `all-am'. > make[2]: Leaving directory > `/home/hardik/development/rtems/b-beagle/arm-rtems4.11/c' > Making all in beagleboneblack > make[2]: Entering directory > `/home/hardik/development/rtems/b-beagle/arm-rtems4.11/c/beagleboneblack' > make[2]: *** No rule to make target `all'. Stop. > make[2]: Leaving directory > `/home/hardik/development/rtems/b-beagle/arm-rtems4.11/c/beagleboneblack' > make[1]: *** [all-recursive] Error 1 > make[1]: Leaving directory > `/home/hardik/development/rtems/b-beagle/arm-rtems4.11/c' > make: *** [all-recursive] Error 1 > > > _______________________________________________ > devel mailing list > [email protected] > http://lists.rtems.org/mailman/listinfo/devel _______________________________________________ devel mailing list [email protected] http://lists.rtems.org/mailman/listinfo/devel
