2015-06-05 21:02 GMT+03:00 Sujay Raj <sujayr...@gmail.com>: > From what I could make out from the documentation in README.waf, > in waf configure , --prefix is where you would like to install rtems-libbsd, > --rtems is where you installed your bsp, that is, the '--prefix' you > passed while configuring the bsp. > '--rtems-tools' points to the tool-set you built using RSB (the > --prefix you passed to the RSB) and > '--rtems-bsps' should be provided with the string 'architecture/bsp'. > > (everything without quotes, quotes are just for illustration) > > usually --prefix and --rtems would have the same value, but it depends > on how you are setting things up.
Thanks, I'll try. > Further, from libbsd.txt, in config.inc BSP should only be the name of > your BSP, not c/raspberrypi/make. Can't agree with you here. This path is exactly what is needed for successful build > See if this helps. > Regards > > > > On Fri, Jun 5, 2015 at 10:47 PM, Yurii Shevtsov <unge...@gmail.com> wrote: >> Since 'waf' requires four params and 'make' only three in config.inc, >> I got confused with waf. Could anyone help me with waf params? Here is >> my config.inc: >> TARGET = arm-rtems4.11 >> BSP = c/raspberrypi/make >> PREFIX = /home/gtament/development/rtems/src/b-rpi >> >> Thanks in advance) >> _______________________________________________ >> devel mailing list >> devel@rtems.org >> http://lists.rtems.org/mailman/listinfo/devel _______________________________________________ devel mailing list devel@rtems.org http://lists.rtems.org/mailman/listinfo/devel
