On 10/13/2014 2:56 PM, Peter Dufault wrote: > On Oct 13, 2014, at 15:22 , Peter Dufault <dufa...@hda.com> wrote: > >> This looks like an issue in the header. I downloaded the MPC5674F Reference >> Manual and it does specify 479 interrupt request sources. See table 9-2, >> INTC Memory Map >> >> Base + (0x0040–0x0219) INTC_PSRn—INTC priority select registers 2 0–479 > Last posting on this, because it's confused and I'll defer to someone with > the hardware who can puzzle this out. > > The Freescale manual is inconsistent - there isn't space for 479 (1-byte) > registers in the specified memory range 0x0040 through 0x0219 that I am > quoting above. That amount allows for the 474 registers in the Freescale > header file and not the 479 in the RTEMS header file. So if I had to guess > I'd guess the RTEMS header is wrong because someone read the Freescale manual > and saw it clearly say there are 479 registers. That sounds enormously like a typo in the manual since the warning says 474u. The compiler is catching that there isn't enough space in that array.
I am prone to change 479 to 474 as you suggested but I would like another opinion first. Thanks for tracking this one down. > Peter > ----------------- > Peter Dufault > HD Associates, Inc. Software and System Engineering > -- Joel Sherrill, Ph.D. Director of Research & Development joel.sherr...@oarcorp.com On-Line Applications Research Ask me about RTEMS: a free RTOS Huntsville AL 35805 Support Available (256) 722-9985 _______________________________________________ devel mailing list devel@rtems.org http://lists.rtems.org/mailman/listinfo/devel
