I have removed the entire or1k-rtems4.11-* and built a vanilla toolchain from latest RSB. Then I cloned latest RTEMS from the git HEAD, configured and built it, and I did not come across this error. MY configure line is: ~/rtems/configure --target=or1k-rtems4.11 --enable-rtemsbsp=or1ksim --enable-networking --enable-tests
On Fri, Aug 29, 2014 at 10:15 PM, Hesham Moustafa <heshamelmat...@gmail.com> wrote: > > On Aug 29, 2014 10:10 PM, "Joel Sherrill" <joel.sherr...@oarcorp.com> wrote: >> >> >> On 8/29/2014 2:24 PM, Hesham Moustafa wrote: >> > On Fri, Aug 29, 2014 at 9:19 PM, Joel Sherrill >> > <joel.sherr...@oarcorp.com> wrote: >> >> Hi >> >> >> >> I think something isn't quite right. I don't know if gcc isn't >> >> including >> >> these or the bsp_specs isn't picking them up. It is a long holiday >> >> weekend >> >> and I just wanted to throw this out since I don't have time to >> >> investigate. >> >> >> >> or1k-rtems4.11-gcc -B../../../../../or1ksim/lib/ -specs bsp_specs >> >> -qrtems -O2 -O0 -g -Wall -Wmissing-prototypes >> >> -Wimplicit-function-declaration -Wstrict-prototypes -Wnested-externs >> >> -O2 -o nsecs.exe init.o empty.o >> >> ../../../../../or1ksim/lib/librtemscpu.a(libscore_a-threadhandler.o): >> >> In >> >> function `_Thread_Handler': >> >> >> >> /users/joel/rtems-4.11-work/rtems-testing/rtems/build-or1k-or1ksim-rtems/or1k-rtems4.11/c/or1ksim/cpukit/score/../../../../../../rtems/c/src/../../cpukit/score/src/threadhandler.c:181: >> >> undefined reference to `_init' >> >> ../../../../../or1ksim/lib/librtemscpu.a(libcsupport_a-newlibc_exit.o): >> >> In function `_exit': >> >> >> >> /users/joel/rtems-4.11-work/rtems-testing/rtems/build-or1k-or1ksim-rtems/or1k-rtems4.11/c/or1ksim/cpukit/libcsupport/../../../../../../rtems/c/src/../../cpukit/libcsupport/src/newlibc_exit.c:43: >> >> undefined reference to `_fini' >> >> collect2: error: ld returned 1 exit status >> >> >> > What's the configure line you used to build? I used to --disable-posix >> > and --disable-itron to avoid some of building errors. >> ITRON is no longer in the tree so that doesn't matter at all. :) >> >> POSIX was on. With it off, I get the same. >> >> I built a new toolset with the RSB just in case and got the same result. >> >> It is a long holiday weekend here. Heading out and not sure what is >> broken. Usually this indicates an issue with the linkcmds or >> the bsp_specs. But if it works for you, then it must be something >> else or all changes are not submitted. >> >> Are your tools "fresh"? >> > There is no problem with RTEMS because I use the RTEMS git repo and not > mine. > I believe my tools are fresh, but I will build it again now and report the > results. > >> >> >> -- >> >> Joel Sherrill, Ph.D. Director of Research & Development >> >> joel.sherr...@oarcorp.com On-Line Applications Research >> >> Ask me about RTEMS: a free RTOS Huntsville AL 35805 >> >> Support Available (256) 722-9985 >> >> >> >> -- >> Joel Sherrill, Ph.D. Director of Research & Development >> joel.sherr...@oarcorp.com On-Line Applications Research >> Ask me about RTEMS: a free RTOS Huntsville AL 35805 >> Support Available (256) 722-9985 >> _______________________________________________ devel mailing list devel@rtems.org http://lists.rtems.org/mailman/listinfo/devel
