On 8/27/2014 12:56 PM, Ric Claus wrote: > Thank you, Joel. I really appreciate it! No problem. I was initially concerned I was going to actually have to know something specific about the BSP. The BSP already had all the timing variables. It just didn't have the macro for the timer driver. I think this should work like on the beatnik.
--joel > Ric > > > On Aug 27, 2014, at 10:55 AM, Joel Sherrill wrote: > >> I just fixed the virtex5. The missing code was pretty simple and >> I just used the code from another BSP. That leaves: >> >> avr/avrtest: >> GCC PR 62284 >> nios2/nios2_iss: >> Needs new toolset but binutils 2.20 has bug and won't assemble >> some code produced by gcc 4.9.1. Reported on binutils mailing list. >> or1k/or1ksim: >> Hesham knows and this will get fixed. >> >> I will now start a build with POSIX, Networking, and SMP disabled but >> tests enabled to see if that breaks anything. >> >> --joel >> >> On 8/27/2014 11:44 AM, Joel Sherrill wrote: >>> On 8/27/2014 11:34 AM, Ric Claus wrote: >>>> Hi Joel, >>>> >>>> Sorry, but unfortunately I no longer have the ability or time to work on >>>> Virtex5 since we moved to Zynqs. If someone else can't take it over, I >>>> think you have no choice but to deprecate it. >>> I understand. This may not be hard to remember though. It is really a simple >>> method. It looks like the clock tick was using the shared decrementer >>> driver. >>> If so, then this from the beatnik BSP should work: >>> >>> #define BSP_Convert_decrementer( _value ) \ >>> ((unsigned long long) ((((unsigned long long)BSP_time_base_divisor) * >>> 1000000ULL) /((unsigned long long) BSP_bus_frequency)) * ((unsigned long >>> long) (_value))) >>> >>> >>> >>>> Ric >>>> >>>> On Aug 27, 2014, at 8:02 AM, Joel Sherrill wrote: >>>> >>>>> Hi >>>>> >>>>> Hesham.. or1k is missing a method. >>>>> >>>>> Ric.. any chance you can fix the virtex5 compile failure? >>>>> >>>>> Others please review and see what you can help with. >>>>> >>>>> I attempted to build all BSPs over night with this configuration: >>>>> >>>>> ../rtems/configure --target=@CPU@-rtems4.11 \ >>>>> --prefix=/home/joel/rtems-4.11-work/bsp-install/ \ >>>>> --disable-multiprocessing --disable-cxx --disable-rdbg \ >>>>> --enable-maintainer-mode --enable-tests --enable-networking \ >>>>> --enable-posix --disable-itron --disable-deprecated \ >>>>> --disable-ada --disable-expada --enable-rtemsbsp=@BSP@ >>>>> >>>>> Although not printed, SMP was enabled in the configure command >>>>> echoed in the output. :( >>>>> >>>>> The results were better than last time: >>>>> >>>>> arm/nds: >>>>> >>>>> ../../../../../nds/lib/librtemsbsp.a(startup.rel): In function >>>>> `boot_card': >>>>> :(.text+0x19c): multiple definition of `boot_card' >>>>> init.o:init.c:(.text+0x70): first defined here >>>>> collect2: error: ld returned 1 exit status >>>>> gmake[6]: *** [spinternalerror01.exe] Error 1 >>>>> >>>>> I think that's because it makes a set of .rel's and ends up pulling in >>>>> a chunk of binary instead of individual files for the BSP. I think I >>>>> can fix this one. >>>>> >>>>> avr/avrtest: Compiler error. Reported as >>>>> https://gcc.gnu.org/bugzilla/show_bug.cgi?id=62284 >>>>> >>>>> nios2/nios2_iss: Compilation error which I think means that >>>>> the newlib version needs to be bumped in the RSB. >>>>> >>>>> ../../../../../rtems/c/src/libchip/network/dwmac-desc-enh.c: In function >>>>> 'dwmac_desc_enh_destroy_tx_desc': >>>>> ../../../../../rtems/c/src/libchip/network/dwmac-desc-enh.c:814: >>>>> warning: implicit declaration of function '__DEVOLATILE' >>>>> ../../../../../rtems/c/src/libchip/network/dwmac-desc-enh.c:814: >>>>> warning: nested extern declaration of '__DEVOLATILE' >>>>> ../../../../../rtems/c/src/libchip/network/dwmac-desc-enh.c:814: error: >>>>> expected expression before 'void' >>>>> ../../../../../rtems/c/src/libchip/network/dwmac-desc-enh.c:814: >>>>> warning: initialization makes pointer from integer without a cast >>>>> ../../../../../rtems/c/src/libchip/network/dwmac-desc-enh.c: In function >>>>> 'dwmac_desc_enh_release_tx_bufs': >>>>> ../../../../../rtems/c/src/libchip/network/dwmac-desc-enh.c:850: error: >>>>> expected expression before 'void' >>>>> >>>>> or1k/or1ksim: Port Missing methods >>>>> /users/joel/rtems-4.11-work/rtems-testing/rtems/build-or1k-or1ksim-rtems/or1k-rtems4.11/c/or1ksim/testsuites/sptests/spcontext01/../../../../../../../rtems/c/src/../../testsuites/sptests/spcontext01/init.c:42: >>>>> undefined reference to `_CPU_Context_validate' >>>>> init.o: In function `clobber_and_switch_timer': >>>>> /users/joel/rtems-4.11-work/rtems-testing/rtems/build-or1k-or1ksim-rtems/or1k-rtems4.11/c/or1ksim/testsuites/sptests/spcontext01/../../../../../../../rtems/c/src/../../testsuites/sptests/spcontext01/init.c:118: >>>>> undefined reference to `_CPU_Context_volatile_clobber' >>>>> >>>>> powerpc/virtex5: BSP missing method >>>>> >>>>> /users/joel/rtems-4.11-work/rtems-testing/rtems/build-powerpc-virtex5-rtems/powerpc-rtems4.11/c/virtex5/lib/libcpu/powerpc/../../../../../../../rtems/c/src/lib/libcpu/powerpc/mpc6xx/timer/timer.c:85: >>>>> undefined reference to `BSP_Convert_decrementer' >>>>> >>>>> -- >>>>> Joel Sherrill, Ph.D. Director of Research & Development >>>>> joel.sherr...@oarcorp.com On-Line Applications Research >>>>> Ask me about RTEMS: a free RTOS Huntsville AL 35805 >>>>> Support Available (256) 722-9985 >>>>> >> -- >> Joel Sherrill, Ph.D. Director of Research & Development >> joel.sherr...@oarcorp.com On-Line Applications Research >> Ask me about RTEMS: a free RTOS Huntsville AL 35805 >> Support Available (256) 722-9985 >> -- Joel Sherrill, Ph.D. Director of Research & Development joel.sherr...@oarcorp.com On-Line Applications Research Ask me about RTEMS: a free RTOS Huntsville AL 35805 Support Available (256) 722-9985 _______________________________________________ devel mailing list devel@rtems.org http://lists.rtems.org/mailman/listinfo/devel
