On Tue, 2012-03-06 at 07:28 +0530, nirmal r wrote: > Hi Vasu, > Thanks. > fcc.sh create-vn eth0.101 worked. > > But I am unable to configure PTP mode still?
Can you provide more details on what configure part is not working ? Below fcc output looks fine as ports are online "Port Type NPort (fabric via point-to-point)". Thanks Vasu > > host9 Info: > Symbolic Name fcoe v0.1 over eth0.101 > Port Name 20:00:00:1b:21:98:d3:59 > Node Name 10:00:00:1b:21:98:d3:59 > Port Type NPort (fabric via point-to-point) > Port State Online > Port ID 00:d3:59 > Fabric Name 0 > Max Frame Size 2112 bytes > Speed 10 Gbit > > host10 Info: > Symbolic Name fcoe v0.1 over eth1.101 > Port Name 20:00:00:1b:21:98:d3:58 > Node Name 10:00:00:1b:21:98:d3:58 > Port Type NPort (fabric via point-to-point) > Port State Online > Port ID 00:d3:58 > Fabric Name 0 > Max Frame Size 2112 bytes > Speed 10 Gbit > > Regards, > Nirmal > > > On Thu, Mar 1, 2012 at 5:07 AM, Vasu Dev <[email protected]> > wrote: > On Wed, 2012-02-29 at 17:11 +0530, nirmal r wrote: > > Hi All, > > I have a couple of configuration questions with respect to > VN2VN. > > 1) How do I configure PTP mode? > > > Use VN2VN as you are doing in 2) below. > > > 2) I tried fcc.sh create-vn eth0 and vconfig add eth0 200. > After capturing > > the packets, I see they are untagged vn2vn packets. > > > > > Because you have created VN2VN on real interface not on vlan > 200. So to > have vlan tagged VN2VN do this on both end. > > vconfig add eth0 200 > ifconfig eth0.200 up > fcc.sh create-vn eth0.200 > > > //Vasu > > > > Please let me know, if I am doing something wrong. > > > > Regards, > > Nirmal > > > _______________________________________________ > > devel mailing list > > [email protected] > > https://lists.open-fcoe.org/mailman/listinfo/devel > > > _______________________________________________ devel mailing list [email protected] https://lists.open-fcoe.org/mailman/listinfo/devel
