How you join the mesh network? authsae or wpa_supplicant? Maybe the HT mode is not enabled.
Refer here, probably helpful for you: https://github.com/o11s/open80211s/wiki/HOWTO ----- Chun-Yeow On Fri, Jul 31, 2015 at 8:34 PM, Carlos Meralto via Devel <[email protected]> wrote: >>2015-07-31 13:09 GMT+01:00 Bob Copeland <[email protected]>: >> One way to gauge normalcy is to do the same test in infrastructure mode; I >> suspect you'll see essentially the same numbers, as your TX rates indicate >> that you're not maxing out the capabilities of the devices even in non-HT >> mode. > > I also tested the BATMAN protocol and could reach normal values for > 802.11g+n in HT mode. (TX: ~100Mbs and throughput ~20Mbs). > The problem can be on compatibility with wireless card? > > Thanks, > Carlos Meralto > _______________________________________________ > Devel mailing list > [email protected] > http://lists.open80211s.org/cgi-bin/mailman/listinfo/devel _______________________________________________ Devel mailing list [email protected] http://lists.open80211s.org/cgi-bin/mailman/listinfo/devel
