James, On 5/9/07, Dan Williams <[EMAIL PROTECTED]> wrote: > On Wed, 2007-05-09 at 10:16 -0400, Jim Gettys wrote: > > It will also require upgrading the Boot2 code in the wireless module to > > 3107, IIRC. > > Probably not.
True: the new boot2 is not needed to test autonomous mode. It is only needed for the nohost Mesh Points. Also, the driver in the current build (406) will work fine in autonomous mode and it supports suspend to memory. So, to test you will need: 1. Install build 406 2. Copy the latest wireless firmware (5.220.11p4) to /lib/firmware 3. Reboot in the new kernel/wireless firmware. 4. Configure the wireless interface or wait for it to auto-start the mesh in channel 1. 5. Suspend to RAM # echo 'm' > /sys/power/state After suspending the 'Associated' led should remain on, and the wireless interface will continue to forward traffic. Cheers, Javier _______________________________________________ Devel mailing list [email protected] http://mailman.laptop.org/mailman/listinfo/devel
