Quick update, just retriggered the KIE-Tools build with the last 6 components remaining.
On Sun, Mar 29, 2026 at 2:02 AM Kennedy Bowers <[email protected]> wrote: > Thanks for the updates! Kogito-apps ran successfully. > > I was hoping to get the kie-tools job running early, but the final > kogito-apps step where we “Trigger Jitexecutor-native workflow” failed > after 1s, which is the same as what happened with your rc1 run. > > I held off on closing the staging repo or kicking off the kie-tools job, > just in case there was anything you did manually after that failure. > > I’ll be away for most of today, so will leave it in your hands. I can pick > things up tomorrow morning if it's not already complete. > > Thank you! > > On 2026/03/29 02:04:13 Alex Porcelli wrote: > > Quick update: Just triggered kogito-apps, hopefully tomorrow it's > possible > > to trigger kie-tools. > > > > > > On Sat, Mar 28, 2026 at 2:24 PM Alex Porcelli <[email protected]> wrote: > > > > > Quick update: in the end, what looked easy... wasn't that much. I > reverted > > > the changed and I'm running back with skip. > > > > > > > > > On Sat, Mar 28, 2026 at 11:45 AM Kennedy <[email protected]> wrote: > > > > > >> Sure we can do that as well. The Optaplanner deploy build is > finished, but > > >> I haven't manually continued the release build yet. I need to head > out for > > >> a bit, so if you want to abort, push a fix and rebuild, I can hand > over > > >> the > > >> reins to you. > > >> > > >> On Sat, Mar 28, 2026 at 2:34 PM Alex Porcelli <[email protected]> > wrote: > > >> > > >> > The fix looks simple. Why don't we just fix and incorporate it into > rc2? > > >> > > > >> > On Sat, Mar 28, 2026 at 9:03 AM Kennedy Bowers <[email protected]> > > >> wrote: > > >> > > > >> > > Quick update: > > >> > > > > >> > > Some tests are failing on the optaplanner build due to the Quarkus > > >> > upgrade > > >> > > by the looks of it. I see you used the Skip Tests flag on your > build, > > >> so > > >> > > will restart the build with the flag enabled and update the > release > > >> guide > > >> > > to reflect that. > > >> > > > > >> > > On 2026/03/28 10:22:34 Alex Porcelli wrote: > > >> > > > Hi Kennedy, > > >> > > > > > >> > > > Any update? I only see drools build completed. > > >> > > > > > >> > > > > > >> > > > On Sat, Mar 28, 2026 at 3:20 AM, Alex Porcelli < > [email protected]> > > >> > wrote: > > >> > > > > > >> > > > > Sounds good. Please report your progress here, so we can > follow > > >> > along. > > >> > > > > > > >> > > > > > > >> > > > > > > >> > > > > On Sat, Mar 28, 2026 at 1:29 AM, Kennedy <[email protected]> > > >> wrote: > > >> > > > > > > >> > > > >> Thanks Alex, > > >> > > > >> > > >> > > > >> I'll get it started now to take advantage of our time zone > > >> coverage. > > >> > > I've > > >> > > > >> started the drools build and will update here when it's > complete. > > >> > > > >> > > >> > > > >> On Sat, Mar 28, 2026 at 2:17 AM Alex Porcelli < > [email protected]> > > >> > > wrote: > > >> > > > >> > > >> > > > >> Just closed the thread, I'm planning to kick the build > tomorrow > > >> > > morning. > > >> > > > >> > > >> > > > >> > > > >> > > > >> > > >> > > > >> @Kennedy, let me know if you're around so we can sync and > make > > >> sure > > >> > we > > >> > > > >> don't step on each other's toes. > > >> > > > >> > > >> > > > >> > > > >> > > > >> > > >> > > > >> - > > >> > > > >> Alex > > >> > > > >> > > >> > > > >> > > > >> > > > >> > > >> > > > >> On Thu, Mar 26, 2026 at 2:32 PM Alex Porcelli < > [email protected]> > > >> > > wrote: > > >> > > > >> > > >> > > > >> > > > >> > > > >> > > >> > > > >> > I used the voting thread to communicate.. but here is my > > >> > suggestion: > > >> > > > >> > > > >> > > > >> > Keep it open for the expected 72h, because in practice we > only > > >> had > > >> > > > >> Toshyia > > >> > > > >> > doing some verification work. It gives the "regular" > expected > > >> time > > >> > > to > > >> > > > >> keep > > >> > > > >> > it open. > > >> > > > >> > > > >> > > > >> > Once past 72h, the voting is closed, and we move forward. > > >> > > > >> > > > >> > > > >> > On Thu, Mar 26, 2026 at 2:17 PM Thiago Lugli < > > >> > [email protected]> > > >> > > > >> wrote: > > >> > > > >> > > > >> > > > >> >> Thanks, Alex and Kennedy! > > >> > > > >> >> > > >> > > > >> >> +1 to start running the pipelines once the pending PRs are > > >> > merged. > > >> > > > >> >> > > >> > > > >> >> On Thu, Mar 26, 2026 at 3:12 PM Tiago Bento < > > >> > [email protected] > > >> > > > > > >> > > > >> >> wrote: > > >> > > > >> >> > > > >> > > > >> >> > Thanks Alex, Kennedy, Yeser and Thiago for helping us > move > > >> > > forward > > >> > > > >> with > > >> > > > >> >> the > > >> > > > >> >> > release! > > >> > > > >> >> > > > >> > > > >> >> > I can vouch for > > >> > > > >> >> > https://github.com/apache/incubator-kie-tools/pull/3516 > so > > >> I > > >> > > merged > > >> > > > >> it. > > >> > > > >> >> > > > >> > > > >> >> > I don’t know about these, though: > > >> > > > >> >> > > > >> > > > >> >> > - > > >> > > https://github.com/apache/incubator-kie-kogito-runtimes/pull/4228 > > >> > > > >> >> > - https://github.com/apache/incubator-kie-kogito- > > >> > > > >> runtimes/pull/4228 > > >> > > > >> >> > - > > >> > https://github.com/apache/incubator-kie-kogito-apps/pull/2311 > > >> > > > >> >> > > > >> > > > >> >> > As they’re all red. > > >> > > > >> >> > > > >> > > > >> >> > +1 to trigger an RC2 build once those are in! > > >> > > > >> >> > > > >> > > > >> >> > > > >> > > > >> >> > > > >> > > > >> >> > On Thu, Mar 26, 2026 at 14:00 Kennedy Bowers < > > >> > [email protected] > > >> > > > > > >> > > > >> >> wrote: > > >> > > > >> >> > > > >> > > > >> >> > > Hi everyone, > > >> > > > >> >> > > > > >> > > > >> >> > > Thanks again to Alex for helping us clear the final > > >> hurdles > > >> > and > > >> > > > >> >> releasing > > >> > > > >> >> > > v10.2.0-rc1. > > >> > > > >> >> > > > > >> > > > >> >> > > To keep up that momentum, I think it makes sense to > begin > > >> > work > > >> > > on > > >> > > > >> RC2 > > >> > > > >> >> as > > >> > > > >> >> > > soon as possible. We’re already aware of issues in RC1 > > >> that > > >> > > will > > >> > > > >> >> prevent > > >> > > > >> >> > > approval, and the PRs currently merged or pending > against > > >> the > > >> > > > >> 10.2.x > > >> > > > >> >> > > branches are expected to address these. Many thanks to > > >> Thiago > > >> > > and > > >> > > > >> >> Yeser for > > >> > > > >> >> > > tackling these so promptly. > > >> > > > >> >> > > > > >> > > > >> >> > > Once all PRs have been merged, I propose to start > running > > >> the > > >> > > > >> >> pipelines > > >> > > > >> >> > > tomorrow, with the goal of having RC2 ready for a > vote by > > >> > > Monday. > > >> > > > >> >> > > > > >> > > > >> >> > > Best regards, > > >> > > > >> >> > > Kennedy > > >> > > > >> >> > > > > >> > > > >> >> > > On 2026/03/24 17:40:09 Alex Porcelli wrote: > > >> > > > >> >> > > > Hi Kennedy, > > >> > > > >> >> > > > > > >> > > > >> >> > > > I don't see any failure. Could you share link where > > >> exactly > > >> > > you > > >> > > > >> are > > >> > > > >> >> > > looking > > >> > > > >> >> > > > at? > > >> > > > >> >> > > > > > >> > > > >> >> > > > What happened early today, during last component > build, > > >> it > > >> > > timed > > >> > > > >> >> out (3h > > >> > > > >> >> > > > limit of that pipeline). > > >> > > > >> >> > > > > > >> > > > >> >> > > > However I triggered the build of the individual > > >> component > > >> > > and I > > >> > > > >> >> believe > > >> > > > >> >> > > > we'll have a RC1 sometime later today. > > >> > > > >> >> > > > > > >> > > > >> >> > > > - > > >> > > > >> >> > > > Alex > > >> > > > >> >> > > > > > >> > > > >> >> > > > > > >> > > > >> >> > > > > > >> > > > >> >> > > > On Tue, Mar 24, 2026 at 1:21 PM, Kennedy Bowers < > > >> > > > >> [email protected] > > >> > > > >> >> > > > >> > > > >> >> > > wrote: > > >> > > > >> >> > > > > > >> > > > >> >> > > > > Hi Alex, > > >> > > > >> >> > > > > > > >> > > > >> >> > > > > Thanks a lot for stepping in and pushing things > > >> forward > > >> > > over > > >> > > > >> the > > >> > > > >> >> > > weekend; > > >> > > > >> >> > > > > I really appreciate the extra time you put in. > > >> > > > >> >> > > > > > > >> > > > >> >> > > > > I see the latest kie-tools build is still > failing, so > > >> > I’ll > > >> > > > >> check > > >> > > > >> >> out > > >> > > > >> >> > > your > > >> > > > >> >> > > > > latest update in my morning, go through the > build, and > > >> > fix > > >> > > any > > >> > > > >> >> > > additional > > >> > > > >> >> > > > > errors that may come up before rerunning the > > >> pipeline. If > > >> > > > >> >> everything > > >> > > > >> >> > > looks > > >> > > > >> >> > > > > good, I’ll continue with the next steps for the > > >> release > > >> > so > > >> > > we > > >> > > > >> can > > >> > > > >> >> keep > > >> > > > >> >> > > > > momentum across time zones, and we can sync up in > your > > >> > > > >> morning. > > >> > > > >> >> > > > > > > >> > > > >> >> > > > > Thanks again for jumping in and helping to > accelerate > > >> > this. > > >> > > > >> >> > > > > > > >> > > > >> >> > > > > Regards, > > >> > > > >> >> > > > > Kennedy > > >> > > > >> >> > > > > > > >> > > > >> >> > > > > On 2026/03/24 13:44:10 Alex Porcelli wrote: > > >> > > > >> >> > > > > > > >> > > > >> >> > > > > Thiago, > > >> > > > >> >> > > > > > > >> > > > >> >> > > > > First of all, thank you for bringing this up on > the > > >> > mailing > > >> > > > >> list. > > >> > > > >> >> > > > > > > >> > > > >> >> > > > > Please go ahead and open the PR against 10.2.x > > >> branch. I > > >> > am > > >> > > > >> >> currently > > >> > > > >> >> > > > > building the last remaining component for RC1, and > > >> the RC > > >> > > > >> should > > >> > > > >> >> be > > >> > > > >> >> > > > > available within the next few hours. > > >> > > > >> >> > > > > > > >> > > > >> >> > > > > At this point, I suggest we document this as a > known > > >> > issue > > >> > > for > > >> > > > >> the > > >> > > > >> >> > > current > > >> > > > >> >> > > > > RC, proceed with verification as usual (as we > know, > > >> there > > >> > > are > > >> > > > >> many > > >> > > > >> >> > > other > > >> > > > >> >> > > > > components in the release), and incorporate the > fix > > >> into > > >> > > RC2. > > >> > > > >> >> > > > > - > > >> > > > >> >> > > > > Alex > > >> > > > >> >> > > > > > > >> > > > >> >> > > > > On Tue, Mar 24, 2026 at 9:27 AM Thiago Lugli < > > >> > > > >> >> [email protected]> > > >> > > > >> >> > > > > wrote: > > >> > > > >> >> > > > > > > >> > > > >> >> > > > > > Alex and Kennedy, > > >> > > > >> >> > > > > > > > >> > > > >> >> > > > > > While testing a few things on the KIE Tools main > > >> > branch, > > >> > > I > > >> > > > >> >> noticed > > >> > > > >> >> > > > > > that both the jBPM Quarkus Dev UI and the > Management > > >> > > Console > > >> > > > >> >> were > > >> > > > >> >> > > > > > broken. jBPM Quarkus Dev UI was not properly > > >> reaching > > >> > the > > >> > > > >> >> GraphQL > > >> > > > >> >> > > > > > endpoints, and both were unable to load Process > and > > >> > Task > > >> > > > >> forms. > > >> > > > >> >> > > > > > I double-checked on the 10.2.x branch, and the > > >> issue is > > >> > > the > > >> > > > >> >> same. > > >> > > > >> >> > > > > > > > >> > > > >> >> > > > > > I have raised a PR for main with the fixes [1], > but > > >> I > > >> > can > > >> > > > >> also > > >> > > > >> >> > > > > > cherry-pick it for the 10.2.x branch if you're > > >> willing > > >> > to > > >> > > > >> run > > >> > > > >> >> the > > >> > > > >> >> > > > > > build again (at least for the jBPM Quarkus Dev > UI > > >> > module > > >> > > + > > >> > > > >> >> Management > > >> > > > >> >> > > > > > Console image). > > >> > > > >> >> > > > > > > > >> > > > >> >> > > > > > > > >> > > > >> >> > > > > > [1] > > >> > > https://github.com/apache/incubator-kie-tools/pull/3510 > > >> > > > >> >> > > > > > > > >> > > > >> >> > > > > > On Mon, Mar 23, 2026 at 8:23 PM Alex Porcelli < > > >> > > > >> >> [email protected]> > > >> > > > >> >> > > > > wrote: > > >> > > > >> >> > > > > > > > > >> > > > >> >> > > > > > > Quick update on the KIE Tools release > progress. > > >> > > > >> >> > > > > > > > > >> > > > >> >> > > > > > > The SVN file size limit issue for the > > >> > swf-builder-image > > >> > > > >> >> (1.1GB) has > > >> > > > >> >> > > > > been > > >> > > > >> >> > > > > > > resolved. ASF Infra increased the limit after > I > > >> > reached > > >> > > > >> out on > > >> > > > >> >> > > Slack. > > >> > > > >> >> > > > > The > > >> > > > >> >> > > > > > > artifact uploaded successfully. > > >> > > > >> >> > > > > > > > > >> > > > >> >> > > > > > > Also found and fixed a bug in the > > >> > > kogito-db-migrator-tool > > >> > > > >> >> pipeline > > >> > > > >> >> > > > > where > > >> > > > >> >> > > > > > > the PNPM filter was pointing to the wrong > package, > > >> > > causing > > >> > > > >> the > > >> > > > >> >> > > Docker > > >> > > > >> >> > > > > > image > > >> > > > >> >> > > > > > > to never be built. The corrupt artifacts were > > >> cleaned > > >> > > from > > >> > > > >> >> SVN, and > > >> > > > >> >> > > > > the > > >> > > > >> >> > > > > > > corrected build produced a proper 154MB image. > > >> > > > >> >> > > > > > > > > >> > > > >> >> > > > > > > 36 artifacts are now in SVN. Build #11 is > > >> currently > > >> > > > >> running > > >> > > > >> >> with > > >> > > > >> >> > > the > > >> > > > >> >> > > > > > > remaining components > (kogito-serverless-operator, > > >> > > > >> >> dev-deployment > > >> > > > >> >> > > > > images, > > >> > > > >> >> > > > > > > online-editor, chrome-extensions, > > >> > > standalone-editors-cdn, > > >> > > > >> >> > > > > > > kn-plugin-workflow). > > >> > > > >> >> > > > > > > > > >> > > > >> >> > > > > > > Will send another update once the build > completes. > > >> > > > >> >> > > > > > > > > >> > > > >> >> > > > > > > - > > >> > > > >> >> > > > > > > Alex > > >> > > > >> >> > > > > > > > > >> > > > >> >> > > > > > > On Mon, Mar 23, 2026 at 1:49 PM Alex Porcelli > < > > >> > > > >> >> [email protected] > > >> > > > >> >> > > > > > >> > > > >> >> > > > > > wrote: > > >> > > > >> >> > > > > > > > > >> > > > >> >> > > > > > > > Another update. Most components are now > building > > >> > and > > >> > > > >> >> publishing > > >> > > > >> >> > > > > > > > successfully to SVN staging. > > >> > > > >> >> > > > > > > > > > >> > > > >> >> > > > > > > > The remaining blocker is the > > >> > > > >> >> > > > > > > > > `serverless-logic-web-tools-swf-builder-image`, > > >> > which > > >> > > > >> grew > > >> > > > >> >> from > > >> > > > >> >> > > > > ~900MB > > >> > > > >> >> > > > > > > > (10.1.0) to ~1.1GB, exceeding the ASF SVN > 1GB > > >> file > > >> > > size > > >> > > > >> >> limit. > > >> > > > >> >> > > I've > > >> > > > >> >> > > > > > opened > > >> > > > >> >> > > > > > > > INFRA-27763 [1] and reached out to the ASF > Infra > > >> > > team on > > >> > > > >> >> Slack. > > >> > > > >> >> > > > > They're > > >> > > > >> >> > > > > > > > already helping with the limit increase. > > >> > > > >> >> > > > > > > > > > >> > > > >> >> > > > > > > > In the meantime, I've triggered another > build > > >> with > > >> > > the > > >> > > > >> >> remaining > > >> > > > >> >> > > ~15 > > >> > > > >> >> > > > > > > > components while we wait for the limit to be > > >> > raised. > > >> > > > >> >> > > > > > > > > > >> > > > >> >> > > > > > > > [1] > > >> > > https://issues.apache.org/jira/browse/INFRA-27763 > > >> > > > >> >> > > > > > > > > > >> > > > >> >> > > > > > > > - > > >> > > > >> >> > > > > > > > Alex > > >> > > > >> >> > > > > > > > > > >> > > > >> >> > > > > > > > > > >> > > > >> >> > > > > > > > > > >> > > > >> >> > > > > > > > On Mon, Mar 23, 2026 at 5:23 AM Alex > Porcelli < > > >> > > > >> >> > > [email protected]> > > >> > > > >> >> > > > > > wrote: > > >> > > > >> >> > > > > > > > > > >> > > > >> >> > > > > > > >> Another update. Made further progress with > a > > >> > > handful of > > >> > > > >> >> > > additional > > >> > > > >> >> > > > > > > >> components, now building and publishing to > SVN > > >> > > > >> >> successfully. > > >> > > > >> >> > > Still > > >> > > > >> >> > > > > > working > > >> > > > >> >> > > > > > > >> through pipeline issues and making > adjustments > > >> > along > > >> > > > >> the > > >> > > > >> >> way. > > >> > > > >> >> > > > > > > >> > > >> > > > >> >> > > > > > > >> Two new issues were found and fixed this > round: > > >> > > > >> >> > > > > > > >> > > >> > > > >> >> > > > > > > >> 1. The release-build orchestrator was > trying to > > >> > > connect > > >> > > > >> to > > >> > > > >> >> an > > >> > > > >> >> > > IP ( > > >> > > > >> >> > > > > > > >> 169.61.187.58:30741) that is refusing > > >> > connections, > > >> > > > >> >> blocking > > >> > > > >> >> > > > > dependent > > >> > > > >> >> > > > > > > >> jobs. Skipped those calls, as they seemed > not > > >> > needed > > >> > > > >> for > > >> > > > >> >> the > > >> > > > >> >> > > > > release. > > >> > > > >> >> > > > > > > >> > > >> > > > >> >> > > > > > > >> 2. The > > >> > > `serverless-logic-web-tools-swf-builder-image` > > >> > > > >> >> built and > > >> > > > >> >> > > > > signed > > >> > > > >> >> > > > > > > >> successfully but failed during SVN upload, > > >> likely > > >> > > due > > >> > > > >> to > > >> > > > >> >> image > > >> > > > >> >> > > > > size. > > >> > > > >> >> > > > > > > >> Retrying now, but if it fails again, we may > > >> need > > >> > the > > >> > > > >> SME > > >> > > > >> >> for > > >> > > > >> >> > > that > > >> > > > >> >> > > > > > image to > > >> > > > >> >> > > > > > > >> take a closer look. > > >> > > > >> >> > > > > > > >> > > >> > > > >> >> > > > > > > >> Kicked off a new build with the remaining > ~21 > > >> > > > >> components. > > >> > > > >> >> > > > > > > >> > > >> > > > >> >> > > > > > > >> - > > >> > > > >> >> > > > > > > >> Alex > > >> > > > >> >> > > > > > > >> > > >> > > > >> >> > > > > > > >> On Sun, Mar 22, 2026 at 10:39 PM Alex > Porcelli > > >> < > > >> > > > >> >> > > [email protected]> > > >> > > > >> >> > > > > > > >> > > > >> >> > > > > > > >> wrote: > > >> > > > >> >> > > > > > > >> > > >> > > > >> >> > > > > > > >>> Quick update on KIE Tools. After several > build > > >> > > rounds, > > >> > > > >> >> I've > > >> > > > >> >> > > > > > identified > > >> > > > >> >> > > > > > > >>> and fixed a number of pipeline issues, > > >> including > > >> > > stale > > >> > > > >> >> > > references > > >> > > > >> >> > > > > to > > >> > > > >> >> > > > > > > >>> removed packages, missing repo > configurations, > > >> > > > >> incomplete > > >> > > > >> >> RC > > >> > > > >> >> > > > > artifact > > >> > > > >> >> > > > > > > >>> flows, and misconfigured Jenkins jobs. > > >> > > > >> >> > > > > > > >>> > > >> > > > >> >> > > > > > > >>> A handful of components have already been > > >> built > > >> > > > >> >> successfully > > >> > > > >> >> > > and > > >> > > > >> >> > > > > are > > >> > > > >> >> > > > > > > >>> uploaded to staging. I just triggered > another > > >> > > round, > > >> > > > >> and > > >> > > > >> >> > > hopefully > > >> > > > >> >> > > > > > it will > > >> > > > >> >> > > > > > > >>> unlock ~25 additional components. > > >> > > > >> >> > > > > > > >>> > > >> > > > >> >> > > > > > > >>> - > > >> > > > >> >> > > > > > > >>> Alex > > >> > > > >> >> > > > > > > >>> > > >> > > > >> >> > > > > > > >>> On Sun, Mar 22, 2026 at 12:07 PM Alex > > >> Porcelli < > > >> > > > >> >> > > > > [email protected]> > > >> > > > >> >> > > > > > > >>> wrote: > > >> > > > >> >> > > > > > > >>> > > >> > > > >> >> > > > > > > >>>> Thank you. > > >> > > > >> >> > > > > > > >>>> > > >> > > > >> >> > > > > > > >>>> Now it's a waiting game while keeping an > eye > > >> on > > >> > > the > > >> > > > >> >> Jenkins > > >> > > > >> >> > > > > > console. I > > >> > > > >> >> > > > > > > >>>> just had to retrigger the build because > it > > >> > failed > > >> > > - I > > >> > > > >> >> forgot > > >> > > > >> >> > > to > > >> > > > >> >> > > > > > manually > > >> > > > >> >> > > > > > > >>>> remove the tag from the previous run. > > >> > > > >> >> > > > > > > >>>> > > >> > > > >> >> > > > > > > >>>> I'll keep you posted. > > >> > > > >> >> > > > > > > >>>> > > >> > > > >> >> > > > > > > >>>> - > > >> > > > >> >> > > > > > > >>>> Alex > > >> > > > >> >> > > > > > > >>>> > > >> > > > >> >> > > > > > > >>>> > > >> > > > >> >> > > > > > > >>>> On Sun, Mar 22, 2026 at 11:48 AM Thiago > > >> Lugli < > > >> > > > >> >> > > > > [email protected]> > > >> > > > >> >> > > > > > > >>>> wrote: > > >> > > > >> >> > > > > > > >>>> > > >> > > > >> >> > > > > > > >>>>> Thanks, Alex! > > >> > > > >> >> > > > > > > >>>>> Let me know if you need any help with > the > > >> KIE > > >> > > Tools > > >> > > > >> >> build > > >> > > > >> >> > > today. > > >> > > > >> >> > > > > > > >>>>> > > >> > > > >> >> > > > > > > >>>>> Em dom., 22 de mar. de 2026, 12:37, Alex > > >> > > Porcelli < > > >> > > > >> >> > > > > > [email protected] > > >> > > > >> >> > > > > > > >>>>> > > > >> > > > >> >> > > > > > > >>>>> escreveu: > > >> > > > >> >> > > > > > > >>>>> > > >> > > > >> >> > > > > > > >>>>> > KIE Tools release build is now > running. > > >> This > > >> > is > > >> > > > >> the > > >> > > > >> >> longest > > >> > > > >> >> > > > > step > > >> > > > >> >> > > > > > - it > > >> > > > >> >> > > > > > > >>>>> > contains about 40 different release > > >> artifacts > > >> > > > >> (other > > >> > > > >> >> repos > > >> > > > >> >> > > had > > >> > > > >> >> > > > > > only 1 > > >> > > > >> >> > > > > > > >>>>> > artifact - maven jars). > > >> > > > >> >> > > > > > > >>>>> > > > >> > > > >> >> > > > > > > >>>>> > The first trigger failed, and while > > >> > > investigating, > > >> > > > >> I > > >> > > > >> >> found > > >> > > > >> >> > > and > > >> > > > >> >> > > > > > fixed > > >> > > > >> >> > > > > > > >>>>> the > > >> > > > >> >> > > > > > > >>>>> > following: > > >> > > > >> >> > > > > > > >>>>> > > > >> > > > >> >> > > > > > > >>>>> > - Default parameters still referenced > > >> > > > >> >> `10.1.x`/`10.1.0` > > >> > > > >> >> > > > > instead > > >> > > > >> >> > > > > > of > > >> > > > >> >> > > > > > > >>>>> > `10.2.x`/`10.2.0` > > >> > > > >> >> > > > > > > >>>>> > - The release-candidate pipeline > passed > > >> the > > >> > > branch > > >> > > > >> >> name > > >> > > > >> >> > > > > instead > > >> > > > >> >> > > > > > of > > >> > > > >> >> > > > > > > >>>>> the tag > > >> > > > >> >> > > > > > > >>>>> > name to downstream jobs, preventing > SCM > > >> > > checkout > > >> > > > >> >> > > > > > > >>>>> > - A result variable bug in the sandbox > > >> > > accelerator > > >> > > > >> job > > >> > > > >> >> > > could > > >> > > > >> >> > > > > > cause > > >> > > > >> >> > > > > > > >>>>> > incorrect pipeline gating > > >> > > > >> >> > > > > > > >>>>> > - Several individual release artifact > jobs > > >> > were > > >> > > > >> >> missing > > >> > > > >> >> > > from > > >> > > > >> >> > > > > the > > >> > > > >> >> > > > > > > >>>>> 10.2.x > > >> > > > >> >> > > > > > > >>>>> > Jenkins folder > > >> > > > >> >> > > > > > > >>>>> > > > >> > > > >> >> > > > > > > >>>>> > I'll post again once we have an > update. > > >> > > > >> >> > > > > > > >>>>> > > > >> > > > >> >> > > > > > > >>>>> > - > > >> > > > >> >> > > > > > > >>>>> > Alex > > >> > > > >> >> > > > > > > >>>>> > > > >> > > > >> >> > > > > > > >>>>> > On Sat, Mar 21, 2026 at 10:26 PM Alex > > >> > Porcelli > > >> > > < > > >> > > > >> >> > > > > > [email protected]> > > >> > > > >> >> > > > > > > >>>>> > wrote: > > >> > > > >> >> > > > > > > >>>>> > > > >> > > > >> >> > > > > > > >>>>> > > Kogito Apps has finished, no issues. > > >> > > > >> >> > > > > > > >>>>> > > > > >> > > > >> >> > > > > > > >>>>> > > Triggering KIE Tools, we'll be back > > >> > tomorrow > > >> > > to > > >> > > > >> >> check. > > >> > > > >> >> > > > > > > >>>>> > > > > >> > > > >> >> > > > > > > >>>>> > > > > >> > > > >> >> > > > > > > >>>>> > > On Sat, Mar 21, 2026 at 9:12 PM Alex > > >> > > Porcelli < > > >> > > > >> >> > > > > > [email protected] > > >> > > > >> >> > > > > > > >>>>> > > > >> > > > >> >> > > > > > > >>>>> > wrote: > > >> > > > >> >> > > > > > > >>>>> > > > > >> > > > >> >> > > > > > > >>>>> > >> Another update on the 10.2 release: > > >> > > > >> >> > > > > > > >>>>> > >> > > >> > > > >> >> > > > > > > >>>>> > >> The build for the last runtime > > >> repository, > > >> > > > >> Kogito > > >> > > > >> >> Apps, > > >> > > > >> >> > > has > > >> > > > >> >> > > > > > now > > >> > > > >> >> > > > > > > >>>>> started. > > >> > > > >> >> > > > > > > >>>>> > >> > > >> > > > >> >> > > > > > > >>>>> > >> Regarding Kogito Runtime, we > > >> encountered > > >> > > > >> another > > >> > > > >> >> issue > > >> > > > >> >> > > > > where > > >> > > > >> >> > > > > > a new > > >> > > > >> >> > > > > > > >>>>> > Gradle > > >> > > > >> >> > > > > > > >>>>> > >> test module broke the javadoc > release > > >> > > build. I > > >> > > > >> have > > >> > > > >> >> > > > > disabled > > >> > > > >> >> > > > > > it > > >> > > > >> >> > > > > > > >>>>> to move > > >> > > > >> >> > > > > > > >>>>> > >> forward and created the following > > >> ticket > > >> > to > > >> > > > >> track > > >> > > > >> >> the > > >> > > > >> >> > > fix: > > >> > > > >> >> > > > > > > >>>>> > >> > > >> > > > >> >> > > > > >> https://github.com/apache/incubator-kie-issues/issues/2274 > > >> > > > >> >> > > > > > > >>>>> > >> > > >> > > > >> >> > > > > > > >>>>> > >> - > > >> > > > >> >> > > > > > > >>>>> > >> Alex > > >> > > > >> >> > > > > > > >>>>> > >> > > >> > > > >> >> > > > > > > >>>>> > >> > > >> > > > >> >> > > > > > > >>>>> > >> On Sat, Mar 21, 2026 at 6:08 PM > Alex > > >> > > Porcelli < > > >> > > > >> >> > > > > > > >>>>> [email protected]> > > >> > > > >> >> > > > > > > >>>>> > >> wrote: > > >> > > > >> >> > > > > > > >>>>> > >> > > >> > > > >> >> > > > > > > >>>>> > >>> Quick update on the 10.2 release > > >> > progress: > > >> > > > >> >> > > > > > > >>>>> > >>> > > >> > > > >> >> > > > > > > >>>>> > >>> The OptaPlanner build had some > > >> failures > > >> > > due to > > >> > > > >> >> changes > > >> > > > >> >> > > in > > >> > > > >> >> > > > > the > > >> > > > >> >> > > > > > > >>>>> > repository > > >> > > > >> >> > > > > > > >>>>> > >>> structure since the 10.1.0 > release, > > >> > > > >> specifically > > >> > > > >> >> > > related > > >> > > > >> >> > > > > to > > >> > > > >> >> > > > > > > >>>>> relocated > > >> > > > >> >> > > > > > > >>>>> > >>> documentation. I've fixed the > issues, > > >> and > > >> > > the > > >> > > > >> >> build is > > >> > > > >> >> > > now > > >> > > > >> >> > > > > > > >>>>> complete. > > >> > > > >> >> > > > > > > >>>>> > >>> > > >> > > > >> >> > > > > > > >>>>> > >>> I am now starting the > kogito-runtime > > >> > build. > > >> > > > >> >> > > > > > > >>>>> > >>> > > >> > > > >> >> > > > > > > >>>>> > >>> - > > >> > > > >> >> > > > > > > >>>>> > >>> Alex > > >> > > > >> >> > > > > > > >>>>> > >>> > > >> > > > >> >> > > > > > > >>>>> > >>> On Fri, Mar 20, 2026 at 5:54 PM > Alex > > >> > > Porcelli > > >> > > > >> < > > >> > > > >> >> > > > > > > >>>>> [email protected]> > > >> > > > >> >> > > > > > > >>>>> > >>> wrote: > > >> > > > >> >> > > > > > > >>>>> > >>> > > >> > > > >> >> > > > > > > >>>>> > >>>> Thanks for the quick support. > > >> > > > >> >> > > > > > > >>>>> > >>>> > > >> > > > >> >> > > > > > > >>>>> > >>>> Based on this initial feedback, > and > > >> to > > >> > > help > > >> > > > >> keep > > >> > > > >> >> > > things > > >> > > > >> >> > > > > > moving, > > >> > > > >> >> > > > > > > >>>>> I’ll > > >> > > > >> >> > > > > > > >>>>> > >>>> go ahead and start working on the > > >> > release > > >> > > > >> over > > >> > > > >> >> the > > >> > > > >> >> > > > > weekend. > > >> > > > >> >> > > > > > > >>>>> > >>>> > > >> > > > >> >> > > > > > > >>>>> > >>>> I’ll share progress as I go, and > we > > >> can > > >> > > > >> continue > > >> > > > >> >> > > > > > coordinating > > >> > > > >> >> > > > > > > >>>>> together > > >> > > > >> >> > > > > > > >>>>> > >>>> early next week on the remaining > > >> pieces. > > >> > > > >> >> > > > > > > >>>>> > >>>> > > >> > > > >> >> > > > > > > >>>>> > >>>> On Fri, Mar 20, 2026 at 1:05 PM > > >> Fabrizio > > >> > > > >> >> Antonangeli > > >> > > > >> >> > > > > > > >>>>> > >>>> <[email protected]> wrote: > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > >> > > > >> >> > > > > > > >>>>> > >>>> > +1 from me as well > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > >> > > > >> >> > > > > > > >>>>> > >>>> > On Fri, 2026-03-20 at 16:57 > +0200, > > >> > Toni > > >> > > > >> Rikkola > > >> > > > >> >> > > wrote: > > >> > > > >> >> > > > > > > >>>>> > >>>> > > I will +1 adding Alex in. He > has > > >> > > worked > > >> > > > >> on > > >> > > > >> >> this > > >> > > > >> >> > > > > before > > >> > > > >> >> > > > > > and > > >> > > > >> >> > > > > > > >>>>> can > > >> > > > >> >> > > > > > > >>>>> > help. > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > >> > > > >> >> > > > > > > >>>>> > >>>> > > Toni > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > >> > > > >> >> > > > > > > >>>>> > >>>> > > On 20/03/2026 16.54, Alex > > >> Porcelli > > >> > > wrote: > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > Hi everyone, > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > I’d like to propose > stepping > > >> in as > > >> > > an > > >> > > > >> >> additional > > >> > > > >> >> > > > > > release > > >> > > > >> >> > > > > > > >>>>> manager > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > for the > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > 10.2 release so we can help > > >> move > > >> > > things > > >> > > > >> >> forward. > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > It looks like progress has > > >> slowed > > >> > a > > >> > > > >> bit, > > >> > > > >> >> and > > >> > > > >> >> > > rather > > >> > > > >> >> > > > > > than > > >> > > > >> >> > > > > > > >>>>> let the > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > release > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > sit any longer, I’m happy > to > > >> help > > >> > > push > > >> > > > >> >> things > > >> > > > >> >> > > along > > >> > > > >> >> > > > > > this > > >> > > > >> >> > > > > > > >>>>> weekend > > >> > > > >> >> > > > > > > >>>>> > >>>> on > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > the > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > backend repositories where > I > > >> can > > >> > > > >> contribute > > >> > > > >> >> > > > > directly. > > >> > > > >> >> > > > > > > >>>>> Then, at > > >> > > > >> >> > > > > > > >>>>> > the > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > beginning of next week, we > can > > >> > > continue > > >> > > > >> the > > >> > > > >> >> > > effort > > >> > > > >> >> > > > > > > >>>>> together and > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > coordinate > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > on the remaining pieces. > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > My goal here is simply to > help > > >> > > > >> accelerate > > >> > > > >> >> the > > >> > > > >> >> > > > > release > > >> > > > >> >> > > > > > and > > >> > > > >> >> > > > > > > >>>>> get us > > >> > > > >> >> > > > > > > >>>>> > >>>> to > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > an RC > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > as smoothly as possible. > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > If there are no > objections, I’m > > >> > > ready > > >> > > > >> to > > >> > > > >> >> jump in > > >> > > > >> >> > > > > and > > >> > > > >> >> > > > > > > >>>>> assist with > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > the > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > release work. > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > - > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > Alex > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > On Sun, Mar 15, 2026 at > 4:07 > > >> PM, > > >> > > Alex > > >> > > > >> >> Porcelli < > > >> > > > >> >> > > > > > > >>>>> > [email protected]> > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > wrote: > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > Hi Kennedy, > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > Looks like you didn't > close > > >> the > > >> > > > >> Drools > > >> > > > >> >> nexus > > >> > > > >> >> > > > > > repository > > >> > > > >> >> > > > > > > >>>>> as > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > documented in > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > the release document. > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > Let me know if you need > > >> > additional > > >> > > > >> help > > >> > > > >> >> to > > >> > > > >> >> > > speed > > >> > > > >> >> > > > > up > > >> > > > >> >> > > > > > this > > >> > > > >> >> > > > > > > >>>>> > >>>> release, > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > I'm more > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > than happy to work on > this > > >> > release > > >> > > > >> with > > >> > > > >> >> you. > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > - > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > Alex > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > On Fri, Mar 13, 2026 at > 9:03 > > >> AM, > > >> > > > >> Kennedy > > >> > > > >> >> > > Bowers > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > <[email protected]> > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > wrote: > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > Hi Alex, > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > Thanks, I appreciate > it. > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > I've managed to fix the > > >> issues > > >> > > and > > >> > > > >> >> > > successfully > > >> > > > >> >> > > > > > > >>>>> branched all > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > repositories > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > to 10.2. They have all > now > > >> > been > > >> > > > >> >> updated to > > >> > > > >> >> > > > > version > > >> > > > >> >> > > > > > > >>>>> 10.2.999- > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > SNAPSHOT. > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > I continued the release > > >> > process > > >> > > by > > >> > > > >> >> running > > >> > > > >> >> > > the > > >> > > > >> >> > > > > > Drools > > >> > > > >> >> > > > > > > >>>>> > release > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > job and it > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > completed successfully. > > >> > However, > > >> > > > >> when > > >> > > > >> >> > > running > > >> > > > >> >> > > > > the > > >> > > > >> >> > > > > > > >>>>> > OptaPlanner > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > job, I’m > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > getting an error that > > >> appears > > >> > > to be > > >> > > > >> >> related > > >> > > > >> >> > > to > > >> > > > >> >> > > > > > invalid > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > credentials, as it > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > cannot access the > staging > > >> > > > >> repository. > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > Do you have any ideas > on > > >> how > > >> > > this > > >> > > > >> >> could be > > >> > > > >> >> > > > > > resolved? > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > Many thanks, > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > Kennedy > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > On 2026/03/06 16:48:59 > Alex > > >> > > > >> Porcelli > > >> > > > >> >> wrote: > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > Kennedy, > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > I can help and work on > > >> this, > > >> > the > > >> > > > >> >> sooner we > > >> > > > >> >> > > have > > >> > > > >> >> > > > > > the > > >> > > > >> >> > > > > > > >>>>> release > > >> > > > >> >> > > > > > > >>>>> > >>>> the > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > better. > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > - > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > Alex > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > On Thu, Mar 05, 2026 at > > >> 2:46 > > >> > PM, > > >> > > > >> >> Kennedy < > > >> > > > >> >> > > > > > > >>>>> > [email protected]> > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > wrote: > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > Hi Alex, > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > The Drools CI ran > > >> successfully > > >> > > and > > >> > > > >> >> updated > > >> > > > >> >> > > the > > >> > > > >> >> > > > > > > >>>>> 999-SNAPSHOT > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > versions as > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > expected. However, the > > >> > > OptaPlanner > > >> > > > >> and > > >> > > > >> >> > > Kogito > > >> > > > >> >> > > > > > builds > > >> > > > >> >> > > > > > > >>>>> were > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > unstable and > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > didn't correctly > update the > > >> > > > >> >> 999-SNAPSHOT > > >> > > > >> >> > > > > version, > > >> > > > >> >> > > > > > so > > >> > > > >> >> > > > > > > >>>>> I'm > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > currently > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > investigating those > issues > > >> > > before > > >> > > > >> >> proceeding > > >> > > > >> >> > > > > with > > >> > > > >> >> > > > > > the > > >> > > > >> >> > > > > > > >>>>> > >>>> kie-tools > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > build. I > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > plan on branching the > > >> > kie-tools > > >> > > > >> repo > > >> > > > >> >> next > > >> > > > >> >> > > week > > >> > > > >> >> > > > > > once > > >> > > > >> >> > > > > > > >>>>> that's > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > resolved. > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > I'll update the Zulip > > >> thread > > >> > as > > >> > > I > > >> > > > >> make > > >> > > > >> >> > > > > progress. > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > Best regards, > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > Kennedy > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > On Tue, Mar 3, 2026 at > > >> 5:03 PM > > >> > > Alex > > >> > > > >> >> Porcelli > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > <[email protected]> > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > wrote: > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > Hi Kennedy, > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > I wanted to follow up > and > > >> see > > >> > if > > >> > > > >> you > > >> > > > >> >> could > > >> > > > >> >> > > > > share > > >> > > > >> >> > > > > > an > > >> > > > >> >> > > > > > > >>>>> update > > >> > > > >> >> > > > > > > >>>>> > on > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > the release > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > status. I took a look > at > > >> the > > >> > > > >> >> repositories, > > >> > > > >> >> > > and > > >> > > > >> >> > > > > > while > > >> > > > >> >> > > > > > > >>>>> some > > >> > > > >> >> > > > > > > >>>>> > now > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > have 10.2.x > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > branches, I noticed the > > >> > versions > > >> > > > >> are > > >> > > > >> >> still > > >> > > > >> >> > > set > > >> > > > >> >> > > > > to > > >> > > > >> >> > > > > > > >>>>> > >>>> 999-SNAPSHOT, > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > which > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > suggests the > automation may > > >> > not > > >> > > > >> have > > >> > > > >> >> > > completed > > >> > > > >> >> > > > > > > >>>>> successfully. > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > I also noticed that > > >> kie-tools > > >> > > > >> doesn't > > >> > > > >> >> > > appear to > > >> > > > >> >> > > > > > have > > >> > > > >> >> > > > > > > >>>>> been > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > branched yet, > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > which could put us at > risk > > >> of > > >> > > > >> getting > > >> > > > >> >> out of > > >> > > > >> >> > > > > sync > > >> > > > >> >> > > > > > > >>>>> with the > > >> > > > >> >> > > > > > > >>>>> > >>>> rest > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > of the > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > release. > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > Could you provide some > > >> clarity > > >> > > on > > >> > > > >> the > > >> > > > >> >> > > current > > >> > > > >> >> > > > > > state > > >> > > > >> >> > > > > > > >>>>> and next > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > steps? > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > Thanks, > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > Alex > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > On Tue, Feb 24, 2026 at > > >> 3:44 > > >> > AM, > > >> > > > >> >> Dominik > > >> > > > >> >> > > Hanak > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > <[email protected] > > > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > wrote: > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > Good news! > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > Thank you Kennedy! > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > Following our past > > >> practice I > > >> > > have > > >> > > > >> >> created a > > >> > > > >> >> > > > > zulip > > >> > > > >> >> > > > > > > >>>>> topic[1] > > >> > > > >> >> > > > > > > >>>>> > to > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > facilitate > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > collaboration on the > > >> release. > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > [1] > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > > > >> > > > >> >> > > > > > > >>>>> > >>>> > > >> > > > >> >> > > > > > > >>>>> > > > >> > > > >> >> > > > > > > >>>>> > > >> > > > >> >> > > > > > > > >> > > > >> >> > > > > > > >> > > > >> >> > > > > >> > > > >> >> > > >> > > > >> > > >> > > > > >> > > > >> > https://kie.zulipchat.com/#narrow/channel/386449-kie-dev/topic/10.2E2.2E0 > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > . > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > > > >> > > 20Release.20Thread/with/575482378 > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > Dominik > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > On Mon, 23 Feb 2026 at > > >> 15:35, > > >> > > > >> Kennedy < > > >> > > > >> >> > > > > > > >>>>> [email protected]> > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > wrote: > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > Hi everyone, > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > Thank you for your > > >> patience as > > >> > > we > > >> > > > >> >> finalize > > >> > > > >> >> > > > > > > >>>>> preparations for > > >> > > > >> >> > > > > > > >>>>> > >>>> the > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > 10.2 > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > release. I appreciate > > >> everyone > > >> > > > >> >> pitching in > > >> > > > >> >> > > with > > >> > > > >> >> > > > > > PRs > > >> > > > >> >> > > > > > > >>>>> and > > >> > > > >> >> > > > > > > >>>>> > >>>> reviews > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > to keep > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > the > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > momentum going. > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > I’m pleased to share > that > > >> the > > >> > > final > > >> > > > >> PR > > >> > > > >> >> > > related > > >> > > > >> >> > > > > to > > >> > > > >> >> > > > > > the > > >> > > > >> >> > > > > > > >>>>> new > > >> > > > >> >> > > > > > > >>>>> > BPMN > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > Editor, > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > first announced here > [1], > > >> has > > >> > > now > > >> > > > >> been > > >> > > > >> >> > > merged > > >> > > > >> >> > > > > > [2]. A > > >> > > > >> >> > > > > > > >>>>> big > > >> > > > >> >> > > > > > > >>>>> > thank > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > you to > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > Tiago > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > Bento for the > significant > > >> work > > >> > > > >> behind > > >> > > > >> >> this > > >> > > > >> >> > > > > > > >>>>> modernization > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > effort, which > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > allows us to move away > from > > >> > our > > >> > > GWT > > >> > > > >> >> > > dependency > > >> > > > >> >> > > > > and > > >> > > > >> >> > > > > > > >>>>> brings us > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > further into > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > compliance with Apache > > >> > > guidelines. > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > Additionally, all > Quarkus > > >> and > > >> > > > >> Spring > > >> > > > >> >> Boot > > >> > > > >> >> > > > > upgrades > > >> > > > >> >> > > > > > > >>>>> have been > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > successfully > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > merged. Many thanks to > Jijo > > >> > > Thomas > > >> > > > >> K > > >> > > > >> >> and > > >> > > > >> >> > > Nithin > > >> > > > >> >> > > > > R > > >> > > > >> >> > > > > > > >>>>> Krishnan > > >> > > > >> >> > > > > > > >>>>> > for > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > your work > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > on > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > these updates [3]. > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > Our original plan for > the > > >> 10.2 > > >> > > > >> release > > >> > > > >> >> was > > >> > > > >> >> > > to > > >> > > > >> >> > > > > > remove > > >> > > > >> >> > > > > > > >>>>> the > > >> > > > >> >> > > > > > > >>>>> > GWT- > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > based > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > BPMN/DMN/SceSim Editors > > >> from > > >> > the > > >> > > > >> >> codebase, > > >> > > > >> >> > > with > > >> > > > >> >> > > > > > the > > >> > > > >> >> > > > > > > >>>>> Quarkus > > >> > > > >> >> > > > > > > >>>>> > >>>> and > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > Spring > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > Boot > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > upgrades scheduled for > the > > >> > > > >> following > > >> > > > >> >> > > release. > > >> > > > >> >> > > > > > Because > > >> > > > >> >> > > > > > > >>>>> the > > >> > > > >> >> > > > > > > >>>>> > GWT > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > work took > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > longer than > anticipated, > > >> it’s > > >> > > great > > >> > > > >> >> that we > > >> > > > >> >> > > are > > >> > > > >> >> > > > > > now > > >> > > > >> >> > > > > > > >>>>> able to > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > include these > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > upgrades in 10.2 as > well. > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > I will begin running > the CI > > >> > > > >> pipelines > > >> > > > >> >> > > tomorrow > > >> > > > >> >> > > > > > > >>>>> morning (CET) > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > which will > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > create the new 10.2.x > > >> > branches. > > >> > > If > > >> > > > >> you > > >> > > > >> >> have > > >> > > > >> >> > > any > > >> > > > >> >> > > > > > PRs > > >> > > > >> >> > > > > > > >>>>> that you > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > believe > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > should > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > be included in this > release > > >> > and > > >> > > > >> would > > >> > > > >> >> > > justify a > > >> > > > >> >> > > > > > short > > >> > > > >> >> > > > > > > >>>>> delay, > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > please > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > respond > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > here. That said, given > the > > >> > time > > >> > > > >> since > > >> > > > >> >> 10.1, > > >> > > > >> >> > > I > > >> > > > >> >> > > > > > believe > > >> > > > >> >> > > > > > > >>>>> it’s > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > important that > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > we move forward and > publish > > >> > this > > >> > > > >> >> release > > >> > > > >> >> > > soon > > >> > > > >> >> > > > > to > > >> > > > >> >> > > > > > > >>>>> > re-establish > > >> > > > >> >> > > > > > > >>>>> > >>>> a > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > consistent > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > and reliable release > > >> cadence. > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > Kind regards, > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > Kennedy > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > [1] > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > > > >> > > > >> >> > > > > > > >>>>> > >>>> > > >> > > > >> >> > > > > > > >>>>> > > >> > > > >> >> > > > > >> > > https://lists.apache.org/thread/87863y10qxm564cc76svvonslponv2f9 > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > [2] > > >> > > > >> >> > > > > > > >>>>> > > >> > > > >> https://github.com/apache/incubator-kie-tools/pull/3448 > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > [3] > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > > > >> > > > >> >> > > > > > > >>>>> > >>>> > > >> > > > >> >> > > > > > > >>>>> > > >> > > > >> >> > > > > >> > > https://lists.apache.org/thread/314vb9wxt22r0t4rh6xqlcf78yz66wv5 > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > > > >> > > > >> >> > > > > > > >>>>> > >>>> > > >> > > > >> >> > > > > > > > >> > > > >> > --------------------------------------------------------------- > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > ------ To > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > unsubscribe, e-mail: > > >> > > > >> >> > > > > > [email protected] > > >> > > > >> >> > > > > > > >>>>> For > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > additional > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > commands, e-mail: > > >> > > > >> >> [email protected] > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > >> > > > >> >> > > > > > > >>>>> > >>>> > > >> > > > >> >> > > > > > > >>>>> > > >> > > > >> >> > > > > > > > >> > > > >> >> > > >> > > > --------------------------------------------------------------------- > > >> > > > >> >> > > > > > > >>>>> > >>>> > > To unsubscribe, e-mail: > > >> > > > >> >> > > > > [email protected] > > >> > > > >> >> > > > > > > >>>>> > >>>> > > For additional commands, > e-mail: > > >> > > > >> >> > > > > > [email protected] > > >> > > > >> >> > > > > > > >>>>> > >>>> > > > > >> > > > >> >> > > > > > > >>>>> > >>>> > > >> > > > >> >> > > > > > > >>>>> > >>> > > >> > > > >> >> > > > > > > >>>>> > > > >> > > > >> >> > > > > > > >>>>> > > >> > > > >> >> > > > > > > >>>> > > >> > > > >> >> > > > > > > > >> > > > >> >> > > > > > > > >> > > > >> >> > > >> > > > --------------------------------------------------------------------- > > >> > > > >> >> > > > > > To unsubscribe, e-mail: > > >> [email protected] > > >> > > > >> >> > > > > > For additional commands, e-mail: > > >> > [email protected] > > >> > > > >> >> > > > > > > > >> > > > >> >> > > > > > > > >> > > > >> >> > > > > > > >> > > > >> >> > > > > > > >> > > > >> >> > > >> > > > --------------------------------------------------------------------- > > >> > > > >> >> > > To > > >> > > > >> >> > > > > unsubscribe, e-mail: > [email protected] > > >> For > > >> > > > >> >> additional > > >> > > > >> >> > > > > commands, e-mail: [email protected] > > >> > > > >> >> > > > > > > >> > > > >> >> > > > > > >> > > > >> >> > > > > >> > > > >> >> > > > > >> > > > >> > > >> > > --------------------------------------------------------------------- > > >> > > > >> >> > > To unsubscribe, e-mail: > [email protected] > > >> > > > >> >> > > For additional commands, e-mail: > [email protected] > > >> > > > >> >> > > > > >> > > > >> >> > > > > >> > > > >> >> > > >> > > > >> >> > > >> > > > --------------------------------------------------------------------- > > >> > > > >> >> To unsubscribe, e-mail: [email protected] > > >> > > > >> >> For additional commands, e-mail: [email protected] > > >> > > > >> >> > > >> > > > >> >> > > >> > > > >> > > >> > > > >> > > > >> > > > >> > > >> > > > > > > >> > > > > > >> > > > > >> > > > --------------------------------------------------------------------- > > >> > > To unsubscribe, e-mail: [email protected] > > >> > > For additional commands, e-mail: [email protected] > > >> > > > > >> > > > > >> > > > >> > > > > > > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [email protected] > For additional commands, e-mail: [email protected] > >
