[
https://issues.apache.org/jira/browse/GEODE-1679?page=com.atlassian.jira.plugin.system.issuetabpanels:all-tabpanel
]
Hitesh Khamesra closed GEODE-1679.
----------------------------------
> Geode UI (Pulse) is not showing Read/Write stats
> --------------------------------------------------
>
> Key: GEODE-1679
> URL: https://issues.apache.org/jira/browse/GEODE-1679
> Project: Geode
> Issue Type: Bug
> Components: pulse
> Affects Versions: 1.0.0-incubating.M1, 1.0.0-incubating.M2,
> 1.0.0-incubating.M3, 1.0.0-incubating
> Reporter: Sushil
> Fix For: 1.1.0
>
>
> It seems we have a bug in the Pulse code then. Swap just verified that this
> bug seems to be introduced in Geode, it was working in Gemfire 8x. Thanks!
> On Tue, Jul 19, 2016 at 12:04 PM, Chaudhary, Sushil (CONT)
> <sushil.chaudh...@capitalone.com> wrote:
> Jinmei,
> I see the below stats for member server2 on GFSH. But still, UI does shows
> 0 as Read/writes. Is that different stats? Refer the snapshot and stats below:
> gfsh>show metrics --member=server2
> Member Metrics
> Category | Metric | Value
> ------------- | -------------------------------- | -----------
> member | upTime | 334
> | cpuUsage | 300
> | currentHeapSize | 599
> | maximumHeapSize | 51008
> jvm | jvmThreads | 109
> | fileDescriptorLimit | 4096
> | totalFileDescriptorOpen | 178
> region | totalRegionCount | 1
> | listOfRegions | regionB
> | rootRegions | /regionB
> | totalRegionEntryCount | 357753
> | totalBucketCount | 211
> | totalPrimaryBucketCount | 211
> | getsAvgLatency | 8163
> | putsAvgLatency | 35892
> | createsRate | 2765
> | destroyRate | 0
> | putAllAvgLatency | 0
> | totalMissCount | 7248392
> | totalHitCount | 5816410
> | getsRate | 84149
> | putsRate | 21031
> | cacheWriterCallsAvgLatency | 0
> | cacheListenerCallsAvgLatency | 5471
> | totalLoadsCompleted | 0
> serialization | serializationRate | 57567
> | serializationLatency | 57567
> | deserializationRate | 105163
> | deserializationLatency | 11803
> | deserializationAvgLatency | 11717
> | PDXDeserializationAvgLatency | 0
> | PDXDeserializationRate | 0
> communication | bytesSentRate | 45173
> | bytesReceivedRate | 14520
> function | numRunningFunctions | 0
> | functionExecutionRate | 1
> | numRunningFunctionsHavingResults | 0
> transaction | totalTransactionsCount | 0
> | transactionCommitsAvgLatency | 0
> | transactionCommittedTotalCount | 0
> | transactionRolledBackTotalCount | 0
> | transactionCommitsRate | 0
> diskstore | totalDiskUsage | 0
> | diskReadsRate | 0
> | diskWritesRate | 0
> | flushTimeAvgLatency | 0
> | totalQueueSize | 0
> | totalBackupInProgress | 0
> lock | lockWaitsInProgress | 0
> | totalLockWaitTime | 0
> | totalNumberOfLockService | 0
> | requestQueues | 0
> eviction | lruEvictionRate | 0
> | lruDestroyRate | 0
> distribution | getInitialImagesInProgress | 0
> | getInitialImageTime | 0
> | getInitialImageKeysReceived | 0
> offheap | maxMemory | 10737418235
> | freeMemory | 10737418235
> | usedMemory | 0
> | objects | 0
> | fragmentation | 0
> | compactionTime | 0
> Sushil Chaudhary
> Cell #: 408-466-2004
> Email: sushil.chaudh...@capitalone.com
> From: Jinmei Liao <jil...@pivotal.io>
> Reply-To: "u...@geode.incubator.apache.org" <u...@geode.incubator.apache.org>
> Date: Tuesday, July 19, 2016 at 1:48 PM
> To: "u...@geode.incubator.apache.org" <u...@geode.incubator.apache.org>
> Subject: Re: Geode UI (Pulse) is not showing Read/Write etc
> What Pulse is showing on the cluster view screen is the statistics on the
> member itself, not on the region. If you do a "show metrics --member=xxx",
> you will get those statics. Looks like the jmx manager reports the gets/puts
> rate on the region and member are different.
> gfsh>show metrics --member=server1
> Member Metrics
> Category | Metric | Value
> ------------- | -------------------------------- | -------------------
> member | upTime | 1818
> | cpuUsage | 0.31241241097450256
> | currentHeapSize | 79
> | maximumHeapSize | 3641
> jvm | jvmThreads | 47
> | fileDescriptorLimit | -1
> | totalFileDescriptorOpen | -1
> region | totalRegionCount | 1
> | listOfRegions | regionA
> | rootRegions | /regionA
> | totalRegionEntryCount | 2
> | totalBucketCount | 0
> | totalPrimaryBucketCount | 0
> | getsAvgLatency | 0
> | putsAvgLatency | 901477
> | createsRate | 0
> | destroyRate | 0
> | putAllAvgLatency | 0
> | totalMissCount | 0
> | totalHitCount | 0
> | getsRate | 0
> | putsRate | 0
> | cacheWriterCallsAvgLatency | 0
> | cacheListenerCallsAvgLatency | 4789
> | totalLoadsCompleted | 0
> serialization | serializationRate | 0
> | serializationLatency | 0
> | deserializationRate | 0
> | deserializationLatency | 0
> | deserializationAvgLatency | 0
> | PDXDeserializationAvgLatency | 0
> | PDXDeserializationRate | 0
> communication | bytesSentRate | 5001
> | bytesReceivedRate | 744
> function | numRunningFunctions | 0
> | functionExecutionRate | 3
> | numRunningFunctionsHavingResults | 0
> transaction | totalTransactionsCount | 0
> | transactionCommitsAvgLatency | 0
> | transactionCommittedTotalCount | 0
> | transactionRolledBackTotalCount | 0
> | transactionCommitsRate | 0
> diskstore | totalDiskUsage | 0
> | diskReadsRate | 0
> | diskWritesRate | 0
> | flushTimeAvgLatency | 0
> | totalQueueSize | 0
> | totalBackupInProgress | 0
> lock | lockWaitsInProgress | 0
> | totalLockWaitTime | 0
> | totalNumberOfLockService | 0
> | requestQueues | 0
> eviction | lruEvictionRate | 0
> | lruDestroyRate | 0
> distribution | getInitialImagesInProgress | 0
> | getInitialImageTime | 0
> | getInitialImageKeysReceived | 0
> offheap | maxMemory | 0
> | freeMemory | 0
> | usedMemory | 0
> | objects | 0
> | fragmentation | 0
> | compactionTime | 0
> On Mon, Jul 18, 2016 at 12:33 PM, Chaudhary, Sushil (CONT)
> <sushil.chaudh...@capitalone.com> wrote:
> Nitin,
> Yes I have locator running. Pulse is enabled by running ‘start pulse’. I can
> see the below values on GFSH, but same does not reflect on UI. Atleast
> get/puts rates?
> gfsh>show metrics --region=/regionB;
> Cluster-wide Region Metrics
> Category | Metric | Value
> --------- | ---------------------------- | -------
> cluster | member count | 4
> | region entry count | 5511251
> region | lastModifiedTime | -1
> | lastAccessedTime | -1
> | missCount | -1
> | hitCount | -1
> | hitRatio | -1
> | getsRate | 34196
> | putsRate | 17059
> | createsRate | 0
> | destroyRate | 0
> | putAllRate | 0
> partition | putLocalRate | 17059
> | putRemoteRate | 0
> | putRemoteLatency | 0
> | putRemoteAvgLatency | 816125
> | bucketCount | 190
> | primaryBucketCount | 113
> | numBucketsWithoutRedundancy | 36
> | totalBucketSize | 9081787
> | averageBucketSize | 11949
> diskstore | totalEntriesOnlyOnDisk | 0
> | diskReadsRate | 0
> | diskWritesRate | 0
> | totalDiskWriteInProgress | 0
> | diskTaskWaiting | 0
> callback | cacheWriterCallsAvgLatency | 0
> | cacheListenerCallsAvgLatency | 0
> eviction | lruEvictionRate | 0
> | lruDestroyRate
> Sushil Chaudhary
> Email: sushil.chaudh...@capitalone.com
> From: Nitin Lamba <nla...@apache.org>
> Reply-To: "u...@geode.incubator.apache.org" <u...@geode.incubator.apache.org>
> Date: Monday, July 18, 2016 at 2:50 PM
> To: "u...@geode.incubator.apache.org" <u...@geode.incubator.apache.org>
> Subject: Re: Geode UI (Pulse) is not showing Read/Write etc
> Are you using a locator? If yes, have you enabled Pulse on the locator and
> set this property during its start-up?
> Another way to confirm if this is a UI or config issue is to enable JMX and
> monitor raw values first.
> Nitin
> On Mon, Jul 18, 2016 at 9:12 AM, Chaudhary, Sushil (CONT)
> <sushil.chaudh...@capitalone.com> wrote:
> Swapnil ,
> I have enable-time-statistic=true enabled when I start the server. Still I do
> not see the below stats on UI screen. Can you please let me know if something
> is wrong here :
> start server --name=server10 --mcast-port=10338 --server-port=40404
> --max-heap=50G --off-heap-memory-size=10G --critical-off-heap-percentage=90
> --group=group1 --socket-buffer-size=1024 --enable-time-statistics=true
> Sushil Chaudhary
> Email: sushil.chaudh...@capitalone.com
> From: Swapnil Bawaskar <sbawas...@pivotal.io>
> Reply-To: "u...@geode.incubator.apache.org" <u...@geode.incubator.apache.org>
> Date: Monday, July 18, 2016 at 2:12 AM
> To: "u...@geode.incubator.apache.org" <u...@geode.incubator.apache.org>
> Subject: Re: Geode UI (Pulse) is not showing Read/Write etc
> You will need to enable time statistics to see these stats. Because they
> incur a performance hit, it's not recommended in production.
> Geode property: enable-time-statistic=true
> On Sunday, July 17, 2016, Jinmei Liao <jil...@pivotal.io> wrote:
> Hi, Sushil, can you provide a screen shot of what you saw? Thanks!
> On Sun, Jul 17, 2016 at 7:38 PM, Chaudhary, Sushil (CONT)
> <sushil.chaudh...@capitalone.com> wrote:
> Hi,
> I am using Geode with 10 nodes and have statistics enable in properties
> files. Still I do see it shows many statistics as 0 like
> Write/Sec
> Read/Sec
> Number of JVM process = 0.
> Can anyone please let me know what is the wrong with UI? It does not show all
> information in good way.
> Regards,
> Sushil Chaudhary
> Email: sushil.chaudh...@capitalone.com
> The information contained in this e-mail is confidential and/or proprietary
> to Capital One and/or its affiliates and may only be used solely in
> performance of work or services for Capital One. The information transmitted
> herewith is intended only for use by the individual or entity to which it is
> addressed. If the reader of this message is not the intended recipient, you
> are hereby notified that any review, retransmission, dissemination,
> distribution, copying or other use of, or taking of any action in reliance
> upon this information is strictly prohibited. If you have received this
> communication in error, please contact the sender and delete the material
> from your computer.
> --
> Cheers
> Jinmei
> The information contained in this e-mail is confidential and/or proprietary
> to Capital One and/or its affiliates and may only be used solely in
> performance of work or services for Capital One. The information transmitted
> herewith is intended only for use by the individual or entity to which it is
> addressed. If the reader of this message is not the intended recipient, you
> are hereby notified that any review, retransmission, dissemination,
> distribution, copying or other use of, or taking of any action in reliance
> upon this information is strictly prohibited. If you have received this
> communication in error, please contact the sender and delete the material
> from your computer.
> The information contained in this e-mail is confidential and/or proprietary
> to Capital One and/or its affiliates and may only be used solely in
> performance of work or services for Capital One. The information transmitted
> herewith is intended only for use by the individual or entity to which it is
> addressed. If the reader of this message is not the intended recipient, you
> are hereby notified that any review, retransmission, dissemination,
> distribution, copying or other use of, or taking of any action in reliance
> upon this information is strictly prohibited. If you have received this
> communication in error, please contact the sender and delete the material
> from your computer.
> --
> Cheers
> Jinmei
> ________________________________________________________
> The information contained in this e-mail is confidential and/or proprietary
> to Capital One and/or its affiliates and may only be used solely in
> performance of work or services for Capital One. The information transmitted
> herewith is intended only for use by the individual or entity to which it is
> addressed. If the reader of this message is not the intended recipient, you
> are hereby notified that any review, retransmission, dissemination,
> distribution, copying or other use of, or taking of any action in reliance
> upon this information is strictly prohibited. If you have received this
> communication in error, please contact the sender and delete the material
> from your computer.
> --
> Cheers
> Jinmei
--
This message was sent by Atlassian JIRA
(v6.3.15#6346)
