Add a test for null PMD.
This test was generated with Claude AI based off of existing
test_pmd_ring.c with some cleanup afterwards.

Signed-off-by: Stephen Hemminger <[email protected]>
---
 app/test/meson.build     |   1 +
 app/test/test_pmd_null.c | 802 +++++++++++++++++++++++++++++++++++++++
 2 files changed, 803 insertions(+)
 create mode 100644 app/test/test_pmd_null.c

diff --git a/app/test/meson.build b/app/test/meson.build
index efec42a6bf..a45991ec34 100644
--- a/app/test/meson.build
+++ b/app/test/meson.build
@@ -141,6 +141,7 @@ source_file_deps = {
     'test_per_lcore.c': [],
     'test_pflock.c': [],
     'test_pie.c': ['sched'],
+    'test_pmd_null.c': ['net_ring', 'ethdev', 'bus_vdev'],
     'test_pmd_perf.c': ['ethdev', 'net'] + packet_burst_generator_deps,
     'test_pmd_ring.c': ['net_ring', 'ethdev', 'bus_vdev'],
     'test_pmd_ring_perf.c': ['ethdev', 'net_ring', 'bus_vdev'],
diff --git a/app/test/test_pmd_null.c b/app/test/test_pmd_null.c
new file mode 100644
index 0000000000..c6a8bba701
--- /dev/null
+++ b/app/test/test_pmd_null.c
@@ -0,0 +1,802 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2026 Stephen Hemminger
+ */
+
+#include <stdbool.h>
+#include <stdio.h>
+#include <string.h>
+#include <inttypes.h>
+
+#include <rte_bus_vdev.h>
+#include <rte_cycles.h>
+#include <rte_ethdev.h>
+#include <rte_ether.h>
+#include <rte_lcore.h>
+#include <rte_mbuf.h>
+#include <rte_mempool.h>
+#include <rte_random.h>
+
+#include "test.h"
+
+#define NUM_MBUFS 256
+#define MBUF_CACHE_SIZE 32
+#define BURST_SIZE 32
+#define RING_SIZE 512
+#define PACKET_SIZE 64
+
+/* Test device names */
+#define NULL_DEV_NAME "net_null_test"
+
+static struct rte_mempool *mp;
+static uint16_t port_id = RTE_MAX_ETHPORTS;
+
+static int
+create_null_port(const char *name, const char *args, uint16_t *out_port_id)
+{
+       int ret;
+
+       ret = rte_vdev_init(name, args);
+       if (ret != 0) {
+               printf("Failed to create null device '%s': %d\n", name, ret);
+               return ret;
+       }
+
+       ret = rte_eth_dev_get_port_by_name(name, out_port_id);
+       if (ret != 0) {
+               printf("Failed to get port id for '%s': %d\n", name, ret);
+               rte_vdev_uninit(name);
+               return ret;
+       }
+
+       return 0;
+}
+
+static int
+configure_null_port(uint16_t pid)
+{
+       struct rte_eth_conf port_conf = {0};
+       struct rte_eth_dev_info dev_info;
+       int ret;
+
+       ret = rte_eth_dev_info_get(pid, &dev_info);
+       if (ret != 0) {
+               printf("Failed to get device info for port %u: %d\n", pid, ret);
+               return ret;
+       }
+
+       ret = rte_eth_dev_configure(pid, 1, 1, &port_conf);
+       if (ret != 0) {
+               printf("Failed to configure port %u: %d\n", pid, ret);
+               return ret;
+       }
+
+       ret = rte_eth_rx_queue_setup(pid, 0, RING_SIZE,
+                                    rte_eth_dev_socket_id(pid),
+                                    NULL, mp);
+       if (ret != 0) {
+               printf("Failed to setup RX queue for port %u: %d\n", pid, ret);
+               return ret;
+       }
+
+       ret = rte_eth_tx_queue_setup(pid, 0, RING_SIZE,
+                                    rte_eth_dev_socket_id(pid),
+                                    NULL);
+       if (ret != 0) {
+               printf("Failed to setup TX queue for port %u: %d\n", pid, ret);
+               return ret;
+       }
+
+       ret = rte_eth_dev_start(pid);
+       if (ret != 0) {
+               printf("Failed to start port %u: %d\n", pid, ret);
+               return ret;
+       }
+
+       return 0;
+}
+
+static int
+test_null_setup(void)
+{
+       /* Create mempool for mbufs */
+       mp = rte_pktmbuf_pool_create("null_test_pool", NUM_MBUFS,
+                                    MBUF_CACHE_SIZE, 0,
+                                    RTE_MBUF_DEFAULT_BUF_SIZE,
+                                    rte_socket_id());
+       if (mp == NULL) {
+               printf("Failed to create mempool\n");
+               return -1;
+       }
+
+       /* Create and configure null port */
+       if (create_null_port(NULL_DEV_NAME, NULL, &port_id) != 0) {
+               printf("Failed to create null port\n");
+               return -1;
+       }
+
+       if (configure_null_port(port_id) != 0) {
+               printf("Failed to configure null port\n");
+               return -1;
+       }
+
+       return 0;
+}
+
+static void
+test_null_teardown(void)
+{
+       /* Stop and close test port */
+       rte_eth_dev_stop(port_id);
+       rte_eth_dev_close(port_id);
+       rte_vdev_uninit(NULL_DEV_NAME);
+       port_id = RTE_MAX_ETHPORTS;
+
+       rte_mempool_free(mp);
+       mp = NULL;
+}
+
+/*
+ * Test: Basic RX - should return empty packets
+ */
+static int
+test_null_rx_basic(void)
+{
+       struct rte_mbuf *bufs[BURST_SIZE];
+       uint16_t nb_rx;
+       unsigned int i;
+
+       /* RX should return requested number of empty packets */
+       nb_rx = rte_eth_rx_burst(port_id, 0, bufs, BURST_SIZE);
+       TEST_ASSERT(nb_rx == BURST_SIZE,
+                   "Expected %u packets, got %u", BURST_SIZE, nb_rx);
+
+       /* Verify packets have expected properties */
+       for (i = 0; i < nb_rx; i++) {
+               TEST_ASSERT(bufs[i] != NULL, "Received NULL mbuf");
+               TEST_ASSERT(bufs[i]->port == port_id,
+                           "Unexpected port id in mbuf: %u", bufs[i]->port);
+
+               /* Default packet size is 64 bytes */
+               TEST_ASSERT(bufs[i]->pkt_len == PACKET_SIZE,
+                           "Unexpected pkt_len: %u", bufs[i]->pkt_len);
+               TEST_ASSERT(bufs[i]->data_len == PACKET_SIZE,
+                           "Unexpected data_len: %u", bufs[i]->data_len);
+       }
+
+       /* Free received mbufs */
+       rte_pktmbuf_free_bulk(bufs, nb_rx);
+
+       return TEST_SUCCESS;
+}
+
+/* Create random valid ethernet packets */
+static int
+test_mbuf_setup_burst(struct rte_mbuf **bufs, unsigned int burst_size)
+{
+       unsigned int i;
+
+       if (rte_pktmbuf_alloc_bulk(mp, bufs, burst_size) != 0)
+               return -1;
+
+       for (i = 0; i < burst_size; i++) {
+               struct rte_mbuf *m = bufs[i];
+               uint16_t len;
+
+               /* Choose random length between ether min and available space */
+               len = rte_rand_max(rte_pktmbuf_tailroom(m) - RTE_ETHER_MIN_LEN)
+                       + RTE_ETHER_MIN_LEN;
+               m->data_len = len;
+               m->buf_len = len;
+       }
+       return 0;
+}
+
+/*
+ * Test: Basic TX - should free all packets
+ */
+static int
+test_null_tx_basic(void)
+{
+       struct rte_mbuf *bufs[BURST_SIZE];
+       uint16_t nb_tx;
+       unsigned int pool_count_before, pool_count_after;
+
+       /* Allocate mbufs for TX */
+       TEST_ASSERT(test_mbuf_setup_burst(bufs, BURST_SIZE) == 0,
+                   "Could not allocate mbufs");
+
+       pool_count_before = rte_mempool_avail_count(mp);
+
+       /* TX should accept and free all packets */
+       nb_tx = rte_eth_tx_burst(port_id, 0, bufs, BURST_SIZE);
+       TEST_ASSERT(nb_tx == BURST_SIZE,
+                   "Expected to TX %u packets, but sent %u", BURST_SIZE, 
nb_tx);
+
+       pool_count_after = rte_mempool_avail_count(mp);
+
+       /* Verify mbufs were freed - pool should have same count */
+       TEST_ASSERT(pool_count_after >= pool_count_before,
+                   "Mbufs not freed: before=%u, after=%u",
+                   pool_count_before, pool_count_after);
+
+       return TEST_SUCCESS;
+}
+
+/*
+ * Test: Statistics verification
+ */
+static int
+test_null_stats(void)
+{
+       struct rte_eth_stats stats;
+       struct rte_mbuf *rx_bufs[BURST_SIZE];
+       struct rte_mbuf *tx_bufs[BURST_SIZE];
+       uint16_t nb_rx, nb_tx;
+       int ret;
+
+       /* Reset stats */
+       ret = rte_eth_stats_reset(port_id);
+       TEST_ASSERT(ret == 0, "Failed to reset stats");
+
+       /* Get initial stats */
+       ret = rte_eth_stats_get(port_id, &stats);
+       TEST_ASSERT(ret == 0, "Failed to get stats");
+       TEST_ASSERT(stats.ipackets == 0, "Initial ipackets not zero");
+       TEST_ASSERT(stats.opackets == 0, "Initial opackets not zero");
+
+       /* Perform RX */
+       nb_rx = rte_eth_rx_burst(port_id, 0, rx_bufs, BURST_SIZE);
+       TEST_ASSERT(nb_rx == BURST_SIZE, "RX burst failed");
+
+       /* Allocate and perform TX */
+       TEST_ASSERT(test_mbuf_setup_burst(tx_bufs, BURST_SIZE) == 0,
+                   "Could not allocate tx mbufs");
+
+       nb_tx = rte_eth_tx_burst(port_id, 0, tx_bufs, BURST_SIZE);
+       TEST_ASSERT(nb_tx == BURST_SIZE, "TX burst failed");
+
+       /* Get updated stats */
+       ret = rte_eth_stats_get(port_id, &stats);
+       TEST_ASSERT(ret == 0, "Failed to get stats after RX/TX");
+
+       /* Verify stats */
+       TEST_ASSERT(stats.ipackets == BURST_SIZE,
+                   "Expected ipackets=%u, got %"PRIu64,
+                   BURST_SIZE, stats.ipackets);
+       TEST_ASSERT(stats.opackets == BURST_SIZE,
+                   "Expected opackets=%u, got %"PRIu64,
+                   BURST_SIZE, stats.opackets);
+
+       rte_pktmbuf_free_bulk(rx_bufs, nb_rx);
+
+       return TEST_SUCCESS;
+}
+
+/*
+ * Test: Custom packet size
+ */
+static int
+test_null_custom_size(void)
+{
+       struct rte_mbuf *bufs[BURST_SIZE];
+       uint16_t custom_port;
+       uint16_t nb_rx;
+       unsigned int i;
+       const unsigned int custom_size = 256;
+       int ret;
+
+       /* Create null device with custom size */
+       ret = create_null_port("net_null_size_test", "size=256", &custom_port);
+       TEST_ASSERT(ret == 0, "Failed to create null port with custom size");
+
+       ret = configure_null_port(custom_port);
+       TEST_ASSERT(ret == 0, "Failed to configure null port");
+
+       /* RX should return packets with custom size */
+       nb_rx = rte_eth_rx_burst(custom_port, 0, bufs, BURST_SIZE);
+       TEST_ASSERT(nb_rx == BURST_SIZE, "RX burst failed");
+
+       /* Verify custom packet size */
+       for (i = 0; i < nb_rx; i++) {
+               TEST_ASSERT(bufs[i]->pkt_len == custom_size,
+                           "Expected pkt_len=%u, got %u",
+                           custom_size, bufs[i]->pkt_len);
+               TEST_ASSERT(bufs[i]->data_len == custom_size,
+                           "Expected data_len=%u, got %u",
+                           custom_size, bufs[i]->data_len);
+       }
+       rte_pktmbuf_free_bulk(bufs, nb_rx);
+
+       /* Cleanup custom port */
+       rte_eth_dev_stop(custom_port);
+       rte_eth_dev_close(custom_port);
+       rte_vdev_uninit("net_null_size_test");
+
+       return TEST_SUCCESS;
+}
+
+/*
+ * Test: Copy mode
+ */
+static int
+test_null_copy_mode(void)
+{
+       struct rte_mbuf *rx_bufs[BURST_SIZE];
+       uint16_t copy_port, nb_rx;
+       int ret;
+
+       /* Create null device with copy enabled */
+       ret = create_null_port("net_null_copy_test", "copy=1", &copy_port);
+       TEST_ASSERT(ret == 0, "Failed to create null port with copy mode");
+
+       ret = configure_null_port(copy_port);
+       TEST_ASSERT(ret == 0, "Failed to configure null port");
+
+       /* RX in copy mode should work */
+       nb_rx = rte_eth_rx_burst(copy_port, 0, rx_bufs, BURST_SIZE);
+       TEST_ASSERT(nb_rx == BURST_SIZE, "RX burst in copy mode failed");
+
+       /* Free RX mbufs */
+       rte_pktmbuf_free_bulk(rx_bufs, nb_rx);
+
+       /* Cleanup */
+       rte_eth_dev_stop(copy_port);
+       rte_eth_dev_close(copy_port);
+       rte_vdev_uninit("net_null_copy_test");
+
+       return TEST_SUCCESS;
+}
+
+/*
+ * Test: No-RX mode
+ */
+static int
+test_null_no_rx_mode(void)
+{
+       struct rte_mbuf *rx_bufs[BURST_SIZE];
+       struct rte_mbuf *tx_bufs[BURST_SIZE];
+       uint16_t norx_port, nb_rx, nb_tx;
+       int ret;
+
+       /* Create null device with no-rx enabled */
+       ret = create_null_port("net_null_norx_test", "no-rx=1", &norx_port);
+       TEST_ASSERT(ret == 0, "Failed to create null port with no-rx mode");
+
+       ret = configure_null_port(norx_port);
+       TEST_ASSERT(ret == 0, "Failed to configure null port");
+
+       /* RX in no-rx mode should return 0 packets */
+       nb_rx = rte_eth_rx_burst(norx_port, 0, rx_bufs, BURST_SIZE);
+       TEST_ASSERT(nb_rx == 0,
+                   "Expected 0 packets in no-rx mode, got %u", nb_rx);
+
+       /* TX in no-rx mode should still work (frees packets) */
+       TEST_ASSERT(test_mbuf_setup_burst(tx_bufs, BURST_SIZE) == 0,
+                   "Could not allocate tx mbufs");
+
+       nb_tx = rte_eth_tx_burst(norx_port, 0, tx_bufs, BURST_SIZE);
+       TEST_ASSERT(nb_tx == BURST_SIZE, "TX burst in no-rx mode failed");
+
+       /* Cleanup */
+       rte_eth_dev_stop(norx_port);
+       rte_eth_dev_close(norx_port);
+       rte_vdev_uninit("net_null_norx_test");
+
+       return TEST_SUCCESS;
+}
+
+/*
+ * Test: Link status
+ */
+static int
+test_null_link_status(void)
+{
+       struct rte_eth_link link;
+       int ret;
+
+       ret = rte_eth_link_get_nowait(port_id, &link);
+       TEST_ASSERT(ret == 0, "Failed to get link status");
+
+       /* After start, link should be UP */
+       TEST_ASSERT(link.link_status == RTE_ETH_LINK_UP,
+                   "Expected link UP after start");
+       TEST_ASSERT(link.link_speed == RTE_ETH_SPEED_NUM_10G,
+                   "Expected 10G link speed");
+       TEST_ASSERT(link.link_duplex == RTE_ETH_LINK_FULL_DUPLEX,
+                   "Expected full duplex");
+
+       /* Stop the device */
+       ret = rte_eth_dev_stop(port_id);
+       TEST_ASSERT(ret == 0, "Failed to stop device");
+
+       ret = rte_eth_link_get_nowait(port_id, &link);
+       TEST_ASSERT(ret == 0, "Failed to get link status after stop");
+
+       /* After stop, link should be DOWN */
+       TEST_ASSERT(link.link_status == RTE_ETH_LINK_DOWN,
+                   "Expected link DOWN after stop");
+
+       /* Restart for subsequent tests */
+       ret = rte_eth_dev_start(port_id);
+       TEST_ASSERT(ret == 0, "Failed to restart device");
+
+       return TEST_SUCCESS;
+}
+
+/*
+ * Test: Device info
+ */
+static int
+test_null_dev_info(void)
+{
+       struct rte_eth_dev_info dev_info;
+       int ret;
+
+       ret = rte_eth_dev_info_get(port_id, &dev_info);
+       TEST_ASSERT(ret == 0, "Failed to get device info");
+
+       /* Verify expected device info values */
+       TEST_ASSERT(dev_info.max_mac_addrs == 1,
+                   "Expected max_mac_addrs=1, got %u", dev_info.max_mac_addrs);
+       TEST_ASSERT(dev_info.max_rx_pktlen == UINT32_MAX,
+                   "Unexpected max_rx_pktlen");
+       TEST_ASSERT(dev_info.min_rx_bufsize == 0,
+                   "Expected min_rx_bufsize=0, got %u", 
dev_info.min_rx_bufsize);
+
+       /* Check TX offload capabilities */
+       TEST_ASSERT(dev_info.tx_offload_capa & RTE_ETH_TX_OFFLOAD_MULTI_SEGS,
+                   "Expected MULTI_SEGS TX offload capability");
+       TEST_ASSERT(dev_info.tx_offload_capa & RTE_ETH_TX_OFFLOAD_MT_LOCKFREE,
+                   "Expected MT_LOCKFREE TX offload capability");
+
+       /* Check RSS capabilities */
+       TEST_ASSERT(dev_info.reta_size > 0, "Expected non-zero reta_size");
+       TEST_ASSERT(dev_info.hash_key_size == 40,
+                   "Expected hash_key_size=40, got %u", 
dev_info.hash_key_size);
+       TEST_ASSERT(dev_info.flow_type_rss_offloads != 0,
+                   "Expected RSS offloads to be set");
+
+       return TEST_SUCCESS;
+}
+
+/*
+ * Test: Multiple RX/TX bursts
+ */
+static int
+test_null_multiple_bursts(void)
+{
+       struct rte_eth_stats stats;
+       uint16_t nb_rx, nb_tx;
+       unsigned int burst;
+       const unsigned int num_bursts = 10;
+       int ret;
+
+       /* Reset stats */
+       ret = rte_eth_stats_reset(port_id);
+       TEST_ASSERT(ret == 0, "Failed to reset stats");
+
+       /* Perform multiple RX bursts */
+       for (burst = 0; burst < num_bursts; burst++) {
+               struct rte_mbuf *bufs[BURST_SIZE];
+
+               nb_rx = rte_eth_rx_burst(port_id, 0, bufs, BURST_SIZE);
+               TEST_ASSERT(nb_rx == BURST_SIZE,
+                           "Burst %u: Expected %u packets, got %u",
+                           burst, BURST_SIZE, nb_rx);
+
+               rte_pktmbuf_free_bulk(bufs, nb_rx);
+       }
+
+       /* Perform multiple TX bursts */
+       for (burst = 0; burst < num_bursts; burst++) {
+               struct rte_mbuf *bufs[BURST_SIZE];
+
+               TEST_ASSERT(test_mbuf_setup_burst(bufs, BURST_SIZE) == 0,
+                           "Could not allocate tx mbufs");
+
+               nb_tx = rte_eth_tx_burst(port_id, 0, bufs, BURST_SIZE);
+               TEST_ASSERT(nb_tx == BURST_SIZE,
+                           "Burst %u: Expected to TX %u, sent %u",
+                           burst, BURST_SIZE, nb_tx);
+       }
+
+       /* Verify total stats */
+       ret = rte_eth_stats_get(port_id, &stats);
+       TEST_ASSERT(ret == 0, "Failed to get stats");
+
+       TEST_ASSERT(stats.ipackets == num_bursts * BURST_SIZE,
+                   "Expected ipackets=%u, got %"PRIu64,
+                   num_bursts * BURST_SIZE, stats.ipackets);
+       TEST_ASSERT(stats.opackets == num_bursts * BURST_SIZE,
+                   "Expected opackets=%u, got %"PRIu64,
+                   num_bursts * BURST_SIZE, stats.opackets);
+
+       return TEST_SUCCESS;
+}
+
+/*
+ * Test: RSS configuration
+ * Note: RSS requires multi-queue configuration
+ */
+static int
+test_null_rss_config(void)
+{
+       struct rte_eth_dev_info dev_info;
+       struct rte_eth_rss_conf rss_conf;
+       struct rte_eth_conf port_conf = {0};
+       uint8_t rss_key[40];
+       uint16_t rss_port;
+       const uint16_t num_queues = 2;
+       uint16_t q;
+       int ret;
+
+       /* Create a new null device for RSS testing with multiple queues */
+       ret = create_null_port("net_null_rss_test", NULL, &rss_port);
+       TEST_ASSERT(ret == 0, "Failed to create null port for RSS test");
+
+       ret = rte_eth_dev_info_get(rss_port, &dev_info);
+       TEST_ASSERT(ret == 0, "Failed to get device info");
+
+       /* Configure with RSS enabled and multiple queues */
+       port_conf.rxmode.mq_mode = RTE_ETH_MQ_RX_RSS;
+       port_conf.rx_adv_conf.rss_conf.rss_hf = dev_info.flow_type_rss_offloads;
+
+       ret = rte_eth_dev_configure(rss_port, num_queues, num_queues, 
&port_conf);
+       TEST_ASSERT(ret == 0, "Failed to configure RSS port");
+
+       for (q = 0; q < num_queues; q++) {
+               ret = rte_eth_rx_queue_setup(rss_port, q, RING_SIZE,
+                                            rte_eth_dev_socket_id(rss_port),
+                                            NULL, mp);
+               TEST_ASSERT(ret == 0, "Failed to setup RX queue %u", q);
+
+               ret = rte_eth_tx_queue_setup(rss_port, q, RING_SIZE,
+                                            rte_eth_dev_socket_id(rss_port),
+                                            NULL);
+               TEST_ASSERT(ret == 0, "Failed to setup TX queue %u", q);
+       }
+
+       ret = rte_eth_dev_start(rss_port);
+       TEST_ASSERT(ret == 0, "Failed to start RSS port");
+
+       /* Get current RSS config */
+       memset(&rss_conf, 0, sizeof(rss_conf));
+       rss_conf.rss_key = rss_key;
+       rss_conf.rss_key_len = sizeof(rss_key);
+
+       ret = rte_eth_dev_rss_hash_conf_get(rss_port, &rss_conf);
+       TEST_ASSERT(ret == 0, "Failed to get RSS hash config");
+
+       /* Update RSS config with new key */
+       memset(rss_key, 0x55, sizeof(rss_key));
+       rss_conf.rss_key = rss_key;
+       rss_conf.rss_key_len = sizeof(rss_key);
+       rss_conf.rss_hf = dev_info.flow_type_rss_offloads;
+
+       ret = rte_eth_dev_rss_hash_update(rss_port, &rss_conf);
+       TEST_ASSERT(ret == 0, "Failed to update RSS hash config");
+
+       /* Verify the update */
+       memset(rss_key, 0, sizeof(rss_key));
+       rss_conf.rss_key = rss_key;
+
+       ret = rte_eth_dev_rss_hash_conf_get(rss_port, &rss_conf);
+       TEST_ASSERT(ret == 0, "Failed to get RSS hash config after update");
+
+       /* Verify key was updated */
+       for (unsigned int i = 0; i < sizeof(rss_key); i++) {
+               TEST_ASSERT(rss_key[i] == 0x55,
+                           "RSS key not updated at byte %u", i);
+       }
+
+       /* Cleanup */
+       rte_eth_dev_stop(rss_port);
+       rte_eth_dev_close(rss_port);
+       rte_vdev_uninit("net_null_rss_test");
+
+       return TEST_SUCCESS;
+}
+
+/*
+ * Test: RETA (Redirection Table) configuration
+ * Note: RETA requires multi-queue RSS configuration
+ */
+static int
+test_null_reta_config(void)
+{
+       struct rte_eth_dev_info dev_info;
+       struct rte_eth_rss_reta_entry64 reta_conf[RTE_ETH_RSS_RETA_SIZE_128 /
+                                                RTE_ETH_RETA_GROUP_SIZE];
+       struct rte_eth_conf port_conf = {0};
+       uint16_t reta_port;
+       const uint16_t num_queues = 2;
+       unsigned int i, j, nreta;
+       uint16_t q;
+       int ret;
+
+       /* Create a new null device for RETA testing with multiple queues */
+       ret = create_null_port("net_null_reta_test", NULL, &reta_port);
+       TEST_ASSERT(ret == 0, "Failed to create null port for RETA test");
+
+       ret = rte_eth_dev_info_get(reta_port, &dev_info);
+       TEST_ASSERT(ret == 0, "Failed to get device info");
+
+       TEST_ASSERT(dev_info.reta_size > 0, "RETA size is zero");
+
+       /* Configure with RSS enabled and multiple queues */
+       port_conf.rxmode.mq_mode = RTE_ETH_MQ_RX_RSS;
+       port_conf.rx_adv_conf.rss_conf.rss_hf = dev_info.flow_type_rss_offloads;
+
+       ret = rte_eth_dev_configure(reta_port, num_queues, num_queues, 
&port_conf);
+       TEST_ASSERT(ret == 0, "Failed to configure RETA port");
+
+       for (q = 0; q < num_queues; q++) {
+               ret = rte_eth_rx_queue_setup(reta_port, q, RING_SIZE,
+                                            rte_eth_dev_socket_id(reta_port),
+                                            NULL, mp);
+               TEST_ASSERT(ret == 0, "Failed to setup RX queue %u", q);
+
+               ret = rte_eth_tx_queue_setup(reta_port, q, RING_SIZE,
+                                            rte_eth_dev_socket_id(reta_port),
+                                            NULL);
+               TEST_ASSERT(ret == 0, "Failed to setup TX queue %u", q);
+       }
+
+       ret = rte_eth_dev_start(reta_port);
+       TEST_ASSERT(ret == 0, "Failed to start RETA port");
+
+       /* Initialize RETA config */
+       memset(reta_conf, 0, sizeof(reta_conf));
+       nreta = dev_info.reta_size / RTE_ETH_RETA_GROUP_SIZE;
+       for (i = 0; i < nreta; i++) {
+               reta_conf[i].mask = UINT64_MAX;
+               for (j = 0; j < RTE_ETH_RETA_GROUP_SIZE; j++)
+                       reta_conf[i].reta[j] = j % num_queues;
+       }
+
+       /* Update RETA */
+       ret = rte_eth_dev_rss_reta_update(reta_port, reta_conf, 
dev_info.reta_size);
+       TEST_ASSERT(ret == 0, "Failed to update RETA");
+
+       /* Query RETA */
+       memset(reta_conf, 0, sizeof(reta_conf));
+       for (i = 0; i < nreta; i++)
+               reta_conf[i].mask = UINT64_MAX;
+
+       ret = rte_eth_dev_rss_reta_query(reta_port, reta_conf, 
dev_info.reta_size);
+       TEST_ASSERT(ret == 0, "Failed to query RETA");
+
+       /* Verify RETA values */
+       for (i = 0; i < nreta; i++) {
+               for (j = 0; j < RTE_ETH_RETA_GROUP_SIZE; j++) {
+                       TEST_ASSERT(reta_conf[i].reta[j] == j % num_queues,
+                                   "RETA mismatch at [%u][%u]", i, j);
+               }
+       }
+
+       /* Cleanup */
+       rte_eth_dev_stop(reta_port);
+       rte_eth_dev_close(reta_port);
+       rte_vdev_uninit("net_null_reta_test");
+
+       return TEST_SUCCESS;
+}
+
+/*
+ * Test: Stats reset
+ */
+static int
+test_null_stats_reset(void)
+{
+       struct rte_eth_stats stats;
+       struct rte_mbuf *bufs[BURST_SIZE];
+       uint16_t nb_rx;
+       int ret;
+
+       /* Generate some traffic */
+       nb_rx = rte_eth_rx_burst(port_id, 0, bufs, BURST_SIZE);
+       TEST_ASSERT(nb_rx > 0, "Failed to receive packets");
+
+       rte_pktmbuf_free_bulk(bufs, nb_rx);
+
+       /* Verify stats are non-zero */
+       ret = rte_eth_stats_get(port_id, &stats);
+       TEST_ASSERT(ret == 0, "Failed to get stats");
+       TEST_ASSERT(stats.ipackets > 0, "Expected non-zero ipackets");
+
+       /* Reset stats */
+       ret = rte_eth_stats_reset(port_id);
+       TEST_ASSERT(ret == 0, "Failed to reset stats");
+
+       /* Verify stats are zero */
+       ret = rte_eth_stats_get(port_id, &stats);
+       TEST_ASSERT(ret == 0, "Failed to get stats after reset");
+       TEST_ASSERT(stats.ipackets == 0,
+                   "Expected ipackets=0 after reset, got %"PRIu64,
+                   stats.ipackets);
+       TEST_ASSERT(stats.opackets == 0,
+                   "Expected opackets=0 after reset, got %"PRIu64,
+                   stats.opackets);
+       TEST_ASSERT(stats.ibytes == 0,
+                   "Expected ibytes=0 after reset, got %"PRIu64,
+                   stats.ibytes);
+       TEST_ASSERT(stats.obytes == 0,
+                   "Expected obytes=0 after reset, got %"PRIu64,
+                   stats.obytes);
+
+       return TEST_SUCCESS;
+}
+
+/*
+ * Test: MAC address operations
+ */
+static int
+test_null_mac_addr(void)
+{
+       struct rte_ether_addr mac_addr;
+       struct rte_ether_addr new_mac = {
+               .addr_bytes = {0x00, 0x11, 0x22, 0x33, 0x44, 0x55}
+       };
+       int ret;
+
+       /* Get current MAC address */
+       ret = rte_eth_macaddr_get(port_id, &mac_addr);
+       TEST_ASSERT(ret == 0, "Failed to get MAC address");
+
+       /* Set new MAC address */
+       ret = rte_eth_dev_default_mac_addr_set(port_id, &new_mac);
+       TEST_ASSERT(ret == 0, "Failed to set MAC address");
+
+       return TEST_SUCCESS;
+}
+
+/*
+ * Test: Promiscuous and allmulticast modes
+ */
+static int
+test_null_promisc_allmulti(void)
+{
+       int ret;
+
+       /* Test promiscuous mode - null PMD starts with promiscuous enabled */
+       ret = rte_eth_promiscuous_get(port_id);
+       TEST_ASSERT(ret == 1, "Expected promiscuous mode enabled");
+
+       /* Test allmulticast mode - null PMD starts with allmulti enabled */
+       ret = rte_eth_allmulticast_get(port_id);
+       TEST_ASSERT(ret == 1, "Expected allmulticast mode enabled");
+
+       return TEST_SUCCESS;
+}
+
+static struct unit_test_suite null_pmd_test_suite = {
+       .suite_name = "Null PMD Unit Test Suite",
+       .setup = test_null_setup,
+       .teardown = test_null_teardown,
+       .unit_test_cases = {
+               TEST_CASE(test_null_rx_basic),
+               TEST_CASE(test_null_tx_basic),
+               TEST_CASE(test_null_stats),
+               TEST_CASE(test_null_custom_size),
+               TEST_CASE(test_null_copy_mode),
+               TEST_CASE(test_null_no_rx_mode),
+               TEST_CASE(test_null_link_status),
+               TEST_CASE(test_null_dev_info),
+               TEST_CASE(test_null_multiple_bursts),
+               TEST_CASE(test_null_rss_config),
+               TEST_CASE(test_null_reta_config),
+               TEST_CASE(test_null_stats_reset),
+               TEST_CASE(test_null_mac_addr),
+               TEST_CASE(test_null_promisc_allmulti),
+
+               TEST_CASES_END() /**< NULL terminate unit test array */
+       }
+};
+
+static int
+test_pmd_null(void)
+{
+       return unit_test_suite_runner(&null_pmd_test_suite);
+}
+
+REGISTER_FAST_TEST(null_pmd_autotest, true, true, test_pmd_null);
-- 
2.51.0

Reply via email to