Hi,
(please see below)
On Thu, 24 Apr 2025, Jie Liu wrote:
From: JieLiu <liuj...@linkdatatechnology.com>
Adding a minimum maintainable directory structure for the
network driver and request maintenance of the sxe driver.
Signed-off-by: Jie Liu <liuj...@linkdatatechnology.com>
---
MAINTAINERS | 6 +++
doc/guides/nics/features/sxe.ini | 82 +++++++++++++++++++++++++++++
doc/guides/nics/features/sxe_vf.ini | 39 ++++++++++++++
doc/guides/nics/index.rst | 1 +
doc/guides/nics/sxe.rst | 71 +++++++++++++++++++++++++
drivers/net/sxe/meson.build | 9 ++++
drivers/net/sxe/pf/sxe_ethdev.c | 3 ++
drivers/net/sxe/pf/sxe_ethdev.h | 3 ++
8 files changed, 214 insertions(+)
create mode 100644 doc/guides/nics/features/sxe.ini
create mode 100644 doc/guides/nics/features/sxe_vf.ini
create mode 100644 doc/guides/nics/sxe.rst
create mode 100644 drivers/net/sxe/meson.build
create mode 100644 drivers/net/sxe/pf/sxe_ethdev.c
create mode 100644 drivers/net/sxe/pf/sxe_ethdev.h
diff --git a/MAINTAINERS b/MAINTAINERS
index 82f6e2f917..f92f4fea81 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2055,3 +2055,9 @@ F: examples/vmdq/
F: doc/guides/sample_app_ug/vmdq_forwarding.rst
F: examples/vmdq_dcb/
F: doc/guides/sample_app_ug/vmdq_dcb_forwarding.rst
+
+Linkdata sxe
+M: Jie Li <li...@linkdatatechnology.com>
+F: drivers/net/sxe/
+F: doc/guides/nics/sxe.rst
+F: doc/guides/nics/features/sxe*.ini
diff --git a/doc/guides/nics/features/sxe.ini
b/doc/guides/nics/features/sxe.ini
new file mode 100644
index 0000000000..b61ad7c699
--- /dev/null
+++ b/doc/guides/nics/features/sxe.ini
@@ -0,0 +1,82 @@
+;
+; Supported features of the 'sxe' network poll mode driver.
+;
+; Refer to default.ini for the full list of available PMD features.
+;
+[Features]
+Speed capabilities = Y
+Link speed configuration = Y
+Link status = Y
+Link status event = Y
+Rx interrupt = Y
+Queue start/stop = Y
+Power mgmt address monitor = Y
+MTU update = Y
+Scattered Rx = Y
+LRO = Y
+TSO = Y
+Promiscuous mode = Y
+Allmulticast mode = Y
+Unicast MAC filter = Y
+Multicast MAC filter = Y
+RSS hash = Y
+RSS key update = Y
+RSS reta update = Y
+VMDq = Y
+SR-IOV = Y
+DCB = Y
+VLAN filter = Y
+Flow control = Y
+Rate limitation = Y
+Traffic manager = Y
+Inline crypto = Y
+CRC offload = P
+VLAN offload = P
+QinQ offload = P
+L3 checksum offload = P
+L4 checksum offload = P
+MACsec offload = P
+Inner L3 checksum = P
+Inner L4 checksum = P
+Packet type parsing = Y
+Timesync = Y
+Rx descriptor status = Y
+Tx descriptor status = Y
+Basic stats = Y
+Extended stats = Y
+Stats per queue = Y
+FW version = Y
+EEPROM dump = Y
+Module EEPROM dump = Y
+Registers dump = Y
+Multiprocess aware = Y
+FreeBSD = Y
+Linux = Y
+ARMv8 = Y
+LoongArch64 = Y
+rv64 = Y
+x86-32 = Y
+x86-64 = Y
+
+[rte_flow items]
+eth = P
+e_tag = Y
+fuzzy = Y
+ipv4 = Y
+ipv6 = Y
+nvgre = Y
+raw = Y
+sctp = Y
+tcp = Y
+udp = Y
+vlan = P
+vxlan = Y
+
+[rte_flow actions]
+drop = Y
+mark = Y
+pf = Y
+queue = Y
+rss = Y
+security = Y
+vf = Y
diff --git a/doc/guides/nics/features/sxe_vf.ini
b/doc/guides/nics/features/sxe_vf.ini
new file mode 100644
index 0000000000..49eaeaaaae
--- /dev/null
+++ b/doc/guides/nics/features/sxe_vf.ini
@@ -0,0 +1,39 @@
+;
+; Supported features of the 'sxe_vf' network poll mode driver.
+;
+; Refer to default.ini for the full list of available PMD features.
+;
+[Features]
+Link status = Y
+Rx interrupt = Y
+Power mgmt address monitor = Y
+MTU update = Y
+Scattered Rx = Y
+LRO = Y
+TSO = Y
+Promiscuous mode = Y
+Allmulticast mode = Y
+Unicast MAC filter = Y
+RSS hash = Y
+RSS key update = Y
+RSS reta update = Y
+VLAN filter = Y
+Inline crypto = Y
+CRC offload = P
+VLAN offload = P
+QinQ offload = P
+L3 checksum offload = P
+L4 checksum offload = P
+Inner L3 checksum = P
+Inner L4 checksum = P
+Packet type parsing = Y
+Rx descriptor status = Y
+Tx descriptor status = Y
+Basic stats = Y
+Extended stats = Y
+Registers dump = Y
+FreeBSD = Y
+Linux = Y
+ARMv8 = Y
+x86-32 = Y
+x86-64 = Y
diff --git a/doc/guides/nics/index.rst b/doc/guides/nics/index.rst
index 10a2eca3b0..67e6374c69 100644
--- a/doc/guides/nics/index.rst
+++ b/doc/guides/nics/index.rst
@@ -72,3 +72,4 @@ Network Interface Controller Drivers
vmxnet3
xsc
zxdh
+ sxe
diff --git a/doc/guides/nics/sxe.rst b/doc/guides/nics/sxe.rst
new file mode 100644
index 0000000000..d86d15bec8
--- /dev/null
+++ b/doc/guides/nics/sxe.rst
@@ -0,0 +1,71 @@
+.. SPDX-License-Identifier: BSD-3-Clause
+ Copyright (C), 2022, Linkdata Technology Co., Ltd.
Why not 2025?
+
+SXE Poll Mode Driver
+======================
+
+The SXE PMD (librte_pmd_sxe) provides poll mode driver support
+for Linkdata 1160-2X 10GE Ethernet Adapter.
+
+Features
+--------
+- PXE boot
+- PTP(Precision Time Protocol)
Consider: 'PTP (precision time protocol)'.
+- VMDq(Virtual Machine Device Queues)
Consider: 'VMDq (virtual machine devise queues)'.
+- SR-IOV,max 2PF,63VF per PF
Consider: 'SR-IOV, max. 2 PFs, 63 VFs per PF'.
+- 128 L2 Ethernet MAC Address Filters (unicast and multicast)
+- 64 L2 VLAN filters
+- pldm over mctp over smbus
+- 802.1q VLAN
+- Low Latency Interrupts
+- LRO
+- Promiscuous mode
+- Multicast mode
+- Multiple queues for TX and RX
Consider to spell it as 'Tx' and 'Rx.
+- Receiver Side Scaling (RSS)
For consistency, 'RSS (receive side scaling)', may be?
+- MAC/VLAN filtering
+- Packet type information
+- Checksum offload
+- VLAN/QinQ stripping and inserting
+- TSO offload
+- Port hardware statistics
+- Link state information
+- Link flow control
+- Interrupt mode for RX
+- Scattered and gather for TX and RX
Consider to spell it as 'Tx' and 'Rx'.
+- DCB
+- IEEE 1588
+- FW version
+- Generic flow API
+
+Configuration
+-------------
+
+Dynamic Logging Parameters
+~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+One may leverage EAL option "--log-level" to change default levels
+for the log types supported by the driver. The option is used with
+an argument typically consisting of two parts separated by a colon.
+
+SXE PMD provides the following log types available for control:
+
+- ``pmd.net.sxe.drv`` (default level is **DEBUG**)
+
+ Affects driver-wide messages unrelated to any particular devices.
+
+- ``pmd.net.sxe.init`` (default level is **DEBUG**)
+
+ Extra logging of the messages during PMD initialization.
+
+- ``pmd.net.sxe.rx`` (default level is **DEBUG**)
+
+ Affects rx-wide messages.
Perhaps 'rx' -> 'Rx'.
+- ``pmd.net.sxe.tx`` (default level is **DEBUG**)
Perhaps 'tx' -> 'Tx'.
+
+ Affects tx-wide messages.
Why is 'DEBUG' used by default? Won't it overwhelm the screen with messages?
Thank you.
+
+------------------------------
+
+Refer to the document :ref:`compiling and testing a PMD for a NIC
<pmd_build_and_test>`
+for details.
diff --git a/drivers/net/sxe/meson.build b/drivers/net/sxe/meson.build
new file mode 100644
index 0000000000..dad9ee44a0
--- /dev/null
+++ b/drivers/net/sxe/meson.build
@@ -0,0 +1,9 @@
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright (C), 2020, Wuxi Stars Micro System Technologies Co., Ltd.
+
+deps += ['hash']
+sources = files(
+ 'pf/sxe_ethdev.c',
+)
+
+includes += include_directories('pf')
diff --git a/drivers/net/sxe/pf/sxe_ethdev.c
b/drivers/net/sxe/pf/sxe_ethdev.c
new file mode 100644
index 0000000000..e31a23deeb
--- /dev/null
+++ b/drivers/net/sxe/pf/sxe_ethdev.c
@@ -0,0 +1,3 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2015-2024
+ */
diff --git a/drivers/net/sxe/pf/sxe_ethdev.h
b/drivers/net/sxe/pf/sxe_ethdev.h
new file mode 100644
index 0000000000..e31a23deeb
--- /dev/null
+++ b/drivers/net/sxe/pf/sxe_ethdev.h
@@ -0,0 +1,3 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2015-2024
+ */
--
2.18.4
