> -----Original Message-----
> From: Xu, Ting <[email protected]>
> Sent: Thursday, February 10, 2022 10:17 PM
> To: Ghalem Boudour <[email protected]>; Wu, Jingjing
> <[email protected]>; Xing, Beilei <[email protected]>
> Cc: [email protected]; Thibaut Collet <[email protected]>; Olivier Matz
> <[email protected]>
> Subject: RE: [PATCH v2] net/iavf: initialize large VF setting at startup
> 
> > -----Original Message-----
> > From: Ghalem Boudour <[email protected]>
> > Sent: Thursday, February 10, 2022 6:49 PM
> > To: Wu, Jingjing <[email protected]>; Xing, Beilei
> > <[email protected]>
> > Cc: [email protected]; Xu, Ting <[email protected]>; Ghalem Boudour
> > <[email protected]>; Thibaut Collet
> <[email protected]>;
> > Olivier Matz <[email protected]>
> > Subject: [PATCH v2] net/iavf: initialize large VF setting at startup
> >
> > lv_enabled is used to remember if large VF setting is configured, but
> > its value is not initialized at startup. This can lead to a different
> > configuration regarding the initial configuration of the PF.
> > For example, a first start is done with 8 rx and 8 tx queues. Large VF
> > is not needed and reta size is 64.
> > A second start is done with 20 rx and tx queues. Large VF is required
> > and reta size is 256.
> > A third start is done with 2 rx and tx queues. Large VF is not needed
> > but reta size is 256 as the PF has been configured during the second start.
> >
> > In order to have a consistent behavior regarding reta size whatever
> > the configuration of the PF (may be changed by a previous boot) the
> > lv_enabled must be set properly at the init phase.
> >
> > Signed-off-by: Ghalem Boudour <[email protected]>
> > Signed-off-by: Thibaut Collet <[email protected]>
> > Reviewed-by: Olivier Matz <[email protected]>
> > ---
> > v2:
> > * Enable large VF at initialization independently of rss configuration
> > ---
> >  drivers/net/iavf/iavf_ethdev.c | 3 +++
> >  1 file changed, 3 insertions(+)
> >
> > diff --git a/drivers/net/iavf/iavf_ethdev.c
> > b/drivers/net/iavf/iavf_ethdev.c index 79397f15e54f..d6190ac24ac6
> > 100644
> > --- a/drivers/net/iavf/iavf_ethdev.c
> > +++ b/drivers/net/iavf/iavf_ethdev.c
> > @@ -2278,6 +2278,9 @@ iavf_init_vf(struct rte_eth_dev *dev)
> >             }
> >     }
> >
> > +   if (vf->vsi_res->num_queue_pairs >
> IAVF_MAX_NUM_QUEUES_DFLT)
> > +           vf->lv_enabled = true;
> > +
> >     if (vf->vf_res->vf_cap_flags &
> > VIRTCHNL_VF_OFFLOAD_RX_FLEX_DESC) {
> >             if (iavf_get_supported_rxdid(adapter) != 0) {
> >                     PMD_INIT_LOG(ERR, "failed to do get supported
> rxdid");
> > --
> > 2.30.2
> 
> Acked-by: Ting Xu <[email protected]>

Applied to dpdk-next-net-intel.

Thanks
Qi

Reply via email to