>
> diff --git a/drivers/baseband/fpga_5gnr_fec/Makefile
> b/drivers/baseband/fpga_5gnr_fec/Makefile
> index 3f5c511..b68a79f 100644
> --- a/drivers/baseband/fpga_5gnr_fec/Makefile
> +++ b/drivers/baseband/fpga_5gnr_fec/Makefile
> @@ -23,4 +23,7 @@ LIBABIVER := 1
> # library source files
> SRCS-$(CONFIG_RTE_LIBRTE_PMD_BBDEV_FPGA_5GNR_FEC) +=
> rte_fpga_5gnr_fec.c
>
> +# export include files
> +SYMLINK-$(CONFIG_RTE_LIBRTE_PMD_BBDEV_FPGA_5GNR_FEC)-include +=
> fpga_5gnr_fec.h
> +
> include $(RTE_SDK)/mk/rte.lib.mk
> diff --git a/drivers/baseband/fpga_5gnr_fec/fpga_5gnr_fec.h
> b/drivers/baseband/fpga_5gnr_fec/fpga_5gnr_fec.h
> new file mode 100644
> index 0000000..7eebc7d
> --- /dev/null
> +++ b/drivers/baseband/fpga_5gnr_fec/fpga_5gnr_fec.h
> @@ -0,0 +1,74 @@
> +/* SPDX-License-Identifier: BSD-3-Clause
> + * Copyright(c) 2020 Intel Corporation
> + */
> +
> +#ifndef _FPGA_5GNR_FEC_H_
> +#define _FPGA_5GNR_FEC_H_
> +
> +#include <stdint.h>
> +#include <stdbool.h>
> +
> +/**
> + * @file fpga_5gnr_fec.h
> + *
> + * Interface for Intel(R) FGPA 5GNR FEC device configuration at the host
> level,
> + * directly accessible by the application.
> + * Configuration related to 5GNR functionality is done through
> + * librte_bbdev library.
> + *
> + * @warning
> + * @b EXPERIMENTAL: this API may change without prior notice
> + */
The exposed PMD header files are normally prefixed as rte_pmd_
You should rename your other header file as fpga_5gnr_fec.h
And this one as rte_pmd_fpga_5gnr_fec.h
BTW what is the need of a pmd API to configure the fpga?
Is it not possible to do that as one of rte_bbdev_ops ?
I can see that the comments in rte_bbdev_ops are not in proper format.
'<' should not be there if comment is before the element
Could you please correct them in a separate patch? Please check other
structures as well
> +
> +#ifdef __cplusplus
> +extern "C" {
> +#endif
> +
> +/**< Number of Virtual Functions FGPA 4G FEC supports */
> +#define FPGA_5GNR_FEC_NUM_VFS 8
> +
> +/**
> + * Structure to pass FPGA 4G FEC configuration.
> + */
> +struct fpga_5gnr_fec_conf {
> + /**< 1 if PF is used for dataplane, 0 for VFs */
> + bool pf_mode_en;
> + /**< Number of UL queues per VF */
> + uint8_t vf_ul_queues_number[FPGA_5GNR_FEC_NUM_VFS];
> + /**< Number of DL queues per VF */
> + uint8_t vf_dl_queues_number[FPGA_5GNR_FEC_NUM_VFS];
> + /**< UL bandwidth. Needed for schedule algorithm */
> + uint8_t ul_bandwidth;
> + /**< DL bandwidth. Needed for schedule algorithm */
> + uint8_t dl_bandwidth;
> + /**< UL Load Balance */
> + uint8_t ul_load_balance;
> + /**< DL Load Balance */
> + uint8_t dl_load_balance;
> + /**< FLR timeout value */
> + uint16_t flr_time_out;
If you are adding comment before the element, then no need to add '<'
