HI Kenvish, Apologies, maybe I miss something, but what is the issue ?
Regards, Rami Rosen On Tue, 20 Nov 2018 at 08:24, Kenvish Butani <kenvishw...@gmail.com> wrote: > > # ./l3fwd -c 0x3 -n 2 -- -p 0x3 --config="(0,0,0),(1,0,1)" EAL: Detected 24 > lcore(s) EAL: Detected 2 NUMA nodes EAL: Multi-process socket > /var/run/dpdk/rte/mp_socket EAL: Probing VFIO support... EAL: PCI device > igb_uio 0000:01:00.0: uio device registered with irq 44 0000:01:00.0 on NUMA > socket 0 EAL: probe driver: 8086:10a7 net_e1000_igb EAL: PCI device igb_uio > 0000:01:00.1: uio device registered with irq 45 0000:01:00.1 on NUMA socket 0 > EAL: probe driver: 8086:10a7 net_e1000_igb LPM or EM none selected, default > LPM on Initializing port 0 ... Creating queues: nb_rxq=1 nb_txq=2... > Address:00:1E:67:4B:C9:54, Destination:02:00:00:00:00:00, Allocated mbuf pool > on socket 0 LPM: Adding route 0x01010100 / 24 (0) LPM: Adding route > 0x02010100 / 24 (1) LPM: Adding route 0x0a000a0b / 24 (0) LPM: Adding route > 0x0a001416 / 24 (1) LPM: Adding route IPV6 / 48 (0) LPM: Adding route IPV6 / > 48 (1) Allocated mbuf pool on socket 1 LPM: Adding route 0x01010100 / 24 (0) > LPM: Adding route 0x02010100 / 24 (1) LPM: Adding route 0x0a000a0b / 24 (0) > LPM: Adding route 0x0a001416 / 24 (1) LPM: Adding route IPV6 / 48 (0) LPM: > Adding route IPV6 / 48 (1) txq=0,0,0 txq=1,1,1 Initializing port 1 ... > Creating queues: nb_rxq=1 nb_txq=2... Address:00:1E:67:4B:C9:55, > Destination:02:00:00:00:00:01, txq=0,0,0 txq=1,1,1 Initializing rx queues on > lcore 0 ... rxq=0,0,0 Initializing rx queues on lcore 1 ... rxq=1,0,1 > Checking link status.....................done Port0 Link Up. Speed 1000 Mbps > -full-duplex Port1 Link Up. Speed 1000 Mbps -full-duplex L3FWD: entering main > loop on lcore 1 L3FWD: -- lcoreid=1 portid=1 rxqueueid=0 L3FWD: entering main > loop on lcore 0 L3FWD: -- lcoreid=0 portid=0 rxqueueid=0
