- timecompare has been removed.
(see Linux commit 65f8f9a1c1db831e5159e3e3e50912d1f214cd0c)
- annotations __devinit and __devexit have been removed.
Signed-off-by: Thomas Monjalon <thomas.monjalon at 6wind.com>
---
lib/librte_eal/linuxapp/kni/ethtool/igb/igb.h | 17 -
lib/librte_eal/linuxapp/kni/ethtool/igb/igb_main.c | 460 --------------------
lib/librte_eal/linuxapp/kni/ethtool/igb/kcompat.h | 20 +
3 files changed, 20 insertions(+), 477 deletions(-)
diff --git a/lib/librte_eal/linuxapp/kni/ethtool/igb/igb.h
b/lib/librte_eal/linuxapp/kni/ethtool/igb/igb.h
index 3cebff5..ea120af 100644
--- a/lib/librte_eal/linuxapp/kni/ethtool/igb/igb.h
+++ b/lib/librte_eal/linuxapp/kni/ethtool/igb/igb.h
@@ -44,12 +44,6 @@
#include <linux/ethtool.h>
#endif
-#ifdef HAVE_HW_TIME_STAMP
-#include <linux/clocksource.h>
-#include <linux/timecompare.h>
-#include <linux/net_tstamp.h>
-
-#endif
struct igb_adapter;
#if defined(CONFIG_DCA) || defined(CONFIG_DCA_MODULE)
@@ -59,11 +53,6 @@ struct igb_adapter;
#include <linux/dca.h>
#endif
-#ifndef HAVE_HW_TIME_STAMP
-#undef IGB_PER_PKT_TIMESTAMP
-#endif
-
-
#include "kcompat.h"
#ifdef HAVE_SCTP
@@ -505,12 +494,6 @@ struct igb_adapter {
#ifndef IGB_NO_LRO
struct igb_lro_stats lro_stats;
#endif
-#ifdef HAVE_HW_TIME_STAMP
- struct cyclecounter cycles;
- struct timecounter clock;
- struct timecompare compare;
- struct hwtstamp_config hwtstamp_config;
-#endif
/* structs defined in e1000_hw.h */
struct e1000_hw hw;
diff --git a/lib/librte_eal/linuxapp/kni/ethtool/igb/igb_main.c
b/lib/librte_eal/linuxapp/kni/ethtool/igb/igb_main.c
index 9d772fa..4462464 100644
--- a/lib/librte_eal/linuxapp/kni/ethtool/igb/igb_main.c
+++ b/lib/librte_eal/linuxapp/kni/ethtool/igb/igb_main.c
@@ -111,9 +111,6 @@ static void igb_setup_mrqc(struct igb_adapter *);
void igb_update_stats(struct igb_adapter *);
static int igb_probe(struct pci_dev *, const struct pci_device_id *);
static void __devexit igb_remove(struct pci_dev *pdev);
-#ifdef HAVE_HW_TIME_STAMP
-static void igb_init_hw_timer(struct igb_adapter *adapter);
-#endif
static int igb_sw_init(struct igb_adapter *);
static int igb_open(struct net_device *);
static int igb_close(struct net_device *);
@@ -301,34 +298,6 @@ static void igb_vfta_set(struct igb_adapter *adapter, u32
vid, bool add)
adapter->shadow_vfta[index] = vfta;
}
-#ifdef HAVE_HW_TIME_STAMP
-/**
- * igb_read_clock - read raw cycle counter (to be used by time counter)
- */
-static cycle_t igb_read_clock(const struct cyclecounter *tc)
-{
- struct igb_adapter *adapter =
- container_of(tc, struct igb_adapter, cycles);
- struct e1000_hw *hw = &adapter->hw;
- u64 stamp = 0;
- int shift = 0;
-
- /*
- * The timestamp latches on lowest register read. For the 82580
- * the lowest register is SYSTIMR instead of SYSTIML. However we never
- * adjusted TIMINCA so SYSTIMR will just read as all 0s so ignore it.
- */
- if (hw->mac.type >= e1000_82580) {
- stamp = E1000_READ_REG(hw, E1000_SYSTIMR) >> 8;
- shift = IGB_82580_TSYNC_SHIFT;
- }
-
- stamp |= (u64)E1000_READ_REG(hw, E1000_SYSTIML) << shift;
- stamp |= (u64)E1000_READ_REG(hw, E1000_SYSTIMH) << (shift + 32);
- return stamp;
-}
-
-#endif /* SIOCSHWTSTAMP */
static int debug = NETIF_MSG_DRV | NETIF_MSG_PROBE;
//module_param(debug, int, 0);
//MODULE_PARM_DESC(debug, "Debug level (0=none, ..., 16=all)");
@@ -2341,11 +2310,7 @@ static int __devinit igb_probe(struct pci_dev *pdev,
}
#endif
-#ifdef HAVE_HW_TIME_STAMP
- /* do hw tstamp init after resetting */
- igb_init_hw_timer(adapter);
-#endif
dev_info(pci_dev_to_dev(pdev), "Intel(R) Gigabit Ethernet Network
Connection\n");
/* print bus type/speed/width info */
dev_info(pci_dev_to_dev(pdev), "%s: (PCIe:%s:%s) ",
@@ -2515,113 +2480,6 @@ static void __devexit igb_remove(struct pci_dev *pdev)
#endif /* IGB_SYSFS */
}
-#ifdef HAVE_HW_TIME_STAMP
-/**
- * igb_init_hw_timer - Initialize hardware timer used with IEEE 1588 timestamp
- * @adapter: board private structure to initialize
- *
- * igb_init_hw_timer initializes the function pointer and values for the hw
- * timer found in hardware.
- **/
-static void igb_init_hw_timer(struct igb_adapter *adapter)
-{
- struct e1000_hw *hw = &adapter->hw;
-
- switch (hw->mac.type) {
- case e1000_i350:
- case e1000_82580:
- memset(&adapter->cycles, 0, sizeof(adapter->cycles));
- adapter->cycles.read = igb_read_clock;
- adapter->cycles.mask = CLOCKSOURCE_MASK(64);
- adapter->cycles.mult = 1;
- /*
- * The 82580 timesync updates the system timer every 8ns by 8ns
- * and the value cannot be shifted. Instead we need to shift
- * the registers to generate a 64bit timer value. As a result
- * SYSTIMR/L/H, TXSTMPL/H, RXSTMPL/H all have to be shifted by
- * 24 in order to generate a larger value for synchronization.
- */
- adapter->cycles.shift = IGB_82580_TSYNC_SHIFT;
- /* disable system timer temporarily by setting bit 31 */
- E1000_WRITE_REG(hw, E1000_TSAUXC, 0x80000000);
- E1000_WRITE_FLUSH(hw);
-
- /* Set registers so that rollover occurs soon to test this. */
- E1000_WRITE_REG(hw, E1000_SYSTIMR, 0x00000000);
- E1000_WRITE_REG(hw, E1000_SYSTIML, 0x80000000);
- E1000_WRITE_REG(hw, E1000_SYSTIMH, 0x000000FF);
- E1000_WRITE_FLUSH(hw);
-
- /* enable system timer by clearing bit 31 */
- E1000_WRITE_REG(hw, E1000_TSAUXC, 0x0);
- E1000_WRITE_FLUSH(hw);
-
- timecounter_init(&adapter->clock,
- &adapter->cycles,
- ktime_to_ns(ktime_get_real()));
- /*
- * Synchronize our NIC clock against system wall clock. NIC
- * time stamp reading requires ~3us per sample, each sample
- * was pretty stable even under load => only require 10
- * samples for each offset comparison.
- */
- memset(&adapter->compare, 0, sizeof(adapter->compare));
- adapter->compare.source = &adapter->clock;
- adapter->compare.target = ktime_get_real;
- adapter->compare.num_samples = 10;
- timecompare_update(&adapter->compare, 0);
- break;
- case e1000_82576:
- /*
- * Initialize hardware timer: we keep it running just in case
- * that some program needs it later on.
- */
- memset(&adapter->cycles, 0, sizeof(adapter->cycles));
- adapter->cycles.read = igb_read_clock;
- adapter->cycles.mask = CLOCKSOURCE_MASK(64);
- adapter->cycles.mult = 1;
- /**
- * Scale the NIC clock cycle by a large factor so that
- * relatively small clock corrections can be added or
- * subtracted at each clock tick. The drawbacks of a large
- * factor are a) that the clock register overflows more quickly
- * (not such a big deal) and b) that the increment per tick has
- * to fit into 24 bits. As a result we need to use a shift of
- * 19 so we can fit a value of 16 into the TIMINCA register.
- */
- adapter->cycles.shift = IGB_82576_TSYNC_SHIFT;
- E1000_WRITE_REG(hw, E1000_TIMINCA,
- (1 << E1000_TIMINCA_16NS_SHIFT) |
- (16 << IGB_82576_TSYNC_SHIFT));
-
- /* Set registers so that rollover occurs soon to test this. */
- E1000_WRITE_REG(hw, E1000_SYSTIML, 0x00000000);
- E1000_WRITE_REG(hw, E1000_SYSTIMH, 0xFF800000);
- E1000_WRITE_FLUSH(hw);
-
- timecounter_init(&adapter->clock,
- &adapter->cycles,
- ktime_to_ns(ktime_get_real()));
- /*
- * Synchronize our NIC clock against system wall clock. NIC
- * time stamp reading requires ~3us per sample, each sample
- * was pretty stable even under load => only require 10
- * samples for each offset comparison.
- */
- memset(&adapter->compare, 0, sizeof(adapter->compare));
- adapter->compare.source = &adapter->clock;
- adapter->compare.target = ktime_get_real;
- adapter->compare.num_samples = 10;
- timecompare_update(&adapter->compare, 0);
- break;
- case e1000_82575:
- /* 82575 does not support timesync */
- default:
- break;
- }
-}
-
-#endif /* HAVE_HW_TIME_STAMP */
/**
* igb_sw_init - Initialize general software structures (struct igb_adapter)
* @adapter: board private structure to initialize
@@ -4860,20 +4718,6 @@ netdev_tx_t igb_xmit_frame_ring(struct sk_buff *skb,
first->bytecount = skb->len;
first->gso_segs = 1;
-#ifdef HAVE_HW_TIME_STAMP
-#ifdef SKB_SHARED_TX_IS_UNION
- if (unlikely(skb_shinfo(skb)->tx_flags.flags & SKBTX_HW_TSTAMP)) {
- skb_shinfo(skb)->tx_flags.flags |= SKBTX_IN_PROGRESS;
- tx_flags |= IGB_TX_FLAGS_TSTAMP;
- }
-#else
- if (unlikely(skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP)) {
- skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS;
- tx_flags |= IGB_TX_FLAGS_TSTAMP;
- }
-#endif
-
-#endif
if (vlan_tx_tag_present(skb)) {
tx_flags |= IGB_TX_FLAGS_VLAN;
tx_flags |= (vlan_tx_tag_get(skb) << IGB_TX_FLAGS_VLAN_SHIFT);
@@ -6301,74 +6145,6 @@ static int igb_poll(struct napi_struct *napi, int budget)
return 0;
}
-#ifdef HAVE_HW_TIME_STAMP
-/**
- * igb_systim_to_hwtstamp - convert system time value to hw timestamp
- * @adapter: board private structure
- * @shhwtstamps: timestamp structure to update
- * @regval: unsigned 64bit system time value.
- *
- * We need to convert the system time value stored in the RX/TXSTMP registers
- * into a hwtstamp which can be used by the upper level timestamping functions
- */
-static void igb_systim_to_hwtstamp(struct igb_adapter *adapter,
- struct skb_shared_hwtstamps *shhwtstamps,
- u64 regval)
-{
- u64 ns;
-
- /*
- * The 82580 starts with 1ns at bit 0 in RX/TXSTMPL, shift this up to
- * 24 to match clock shift we setup earlier.
- */
- if (adapter->hw.mac.type >= e1000_82580)
- regval <<= IGB_82580_TSYNC_SHIFT;
-
- ns = timecounter_cyc2time(&adapter->clock, regval);
-
- /*
- * force a timecompare_update here (even if less than a second
- * has passed) in order to prevent the case when ptpd or other
- * software jumps the clock offset. othwerise there is a small
- * window when the timestamp would be based on previous skew
- * and invalid results would be pushed to the network stack.
- */
- timecompare_update(&adapter->compare, 0);
- memset(shhwtstamps, 0, sizeof(struct skb_shared_hwtstamps));
- shhwtstamps->hwtstamp = ns_to_ktime(ns);
- shhwtstamps->syststamp = timecompare_transform(&adapter->compare, ns);
-}
-
-/**
- * igb_tx_hwtstamp - utility function which checks for TX time stamp
- * @q_vector: pointer to q_vector containing needed info
- * @buffer: pointer to igb_tx_buffer structure
- *
- * If we were asked to do hardware stamping and such a time stamp is
- * available, then it must have been for this skb here because we only
- * allow only one such packet into the queue.
- */
-static void igb_tx_hwtstamp(struct igb_q_vector *q_vector,
- struct igb_tx_buffer *buffer_info)
-{
- struct igb_adapter *adapter = q_vector->adapter;
- struct e1000_hw *hw = &adapter->hw;
- struct skb_shared_hwtstamps shhwtstamps;
- u64 regval;
-
- /* if skb does not support hw timestamp or TX stamp not valid exit */
- if (likely(!(buffer_info->tx_flags & IGB_TX_FLAGS_TSTAMP)) ||
- !(E1000_READ_REG(hw, E1000_TSYNCTXCTL) & E1000_TSYNCTXCTL_VALID))
- return;
-
- regval = E1000_READ_REG(hw, E1000_TXSTMPL);
- regval |= (u64)E1000_READ_REG(hw, E1000_TXSTMPH) << 32;
-
- igb_systim_to_hwtstamp(adapter, &shhwtstamps, regval);
- skb_tstamp_tx(buffer_info->skb, &shhwtstamps);
-}
-
-#endif
/**
* igb_clean_tx_irq - Reclaim resources after transmit completes
* @q_vector: pointer to q_vector containing needed info
@@ -6412,11 +6188,6 @@ static bool igb_clean_tx_irq(struct igb_q_vector
*q_vector)
total_bytes += tx_buffer->bytecount;
total_packets += tx_buffer->gso_segs;
-#ifdef HAVE_HW_TIME_STAMP
- /* retrieve hardware timestamp */
- igb_tx_hwtstamp(q_vector, tx_buffer);
-
-#endif
/* free the skb */
dev_kfree_skb_any(tx_buffer->skb);
@@ -6620,48 +6391,8 @@ static inline void igb_rx_hash(struct igb_ring *ring,
if (netdev_ring(ring)->features & NETIF_F_RXHASH)
skb->rxhash = le32_to_cpu(rx_desc->wb.lower.hi_dword.rss);
}
-
#endif
-#ifdef HAVE_HW_TIME_STAMP
-static void igb_rx_hwtstamp(struct igb_q_vector *q_vector,
- union e1000_adv_rx_desc *rx_desc,
- struct sk_buff *skb)
-{
- struct igb_adapter *adapter = q_vector->adapter;
- struct e1000_hw *hw = &adapter->hw;
- u64 regval;
-
- if (!igb_test_staterr(rx_desc, E1000_RXDADV_STAT_TSIP |
- E1000_RXDADV_STAT_TS))
- return;
-
- /*
- * If this bit is set, then the RX registers contain the time stamp. No
- * other packet will be time stamped until we read these registers, so
- * read the registers to make them available again. Because only one
- * packet can be time stamped at a time, we know that the register
- * values must belong to this one here and therefore we don't need to
- * compare any of the additional attributes stored for it.
- *
- * If nothing went wrong, then it should have a skb_shared_tx that we
- * can turn into a skb_shared_hwtstamps.
- */
- if (igb_test_staterr(rx_desc, E1000_RXDADV_STAT_TSIP)) {
- u32 *stamp = (u32 *)skb->data;
- regval = le32_to_cpu(*(stamp + 2));
- regval |= (u64)le32_to_cpu(*(stamp + 3)) << 32;
- skb_pull(skb, IGB_TS_HDR_LEN);
- } else {
- if(!(E1000_READ_REG(hw, E1000_TSYNCRXCTL) &
E1000_TSYNCRXCTL_VALID))
- return;
-
- regval = E1000_READ_REG(hw, E1000_RXSTMPL);
- regval |= (u64)E1000_READ_REG(hw, E1000_RXSTMPH) << 32;
- }
- igb_systim_to_hwtstamp(adapter, skb_hwtstamps(skb), regval);
-}
-#endif
static void igb_rx_vlan(struct igb_ring *ring,
union e1000_adv_rx_desc *rx_desc,
struct sk_buff *skb)
@@ -7237,9 +6968,6 @@ static bool igb_clean_rx_irq(struct igb_q_vector
*q_vector, int budget)
goto next_desc;
}
-#ifdef HAVE_HW_TIME_STAMP
- igb_rx_hwtstamp(q_vector, rx_desc, skb);
-#endif
#ifdef NETIF_F_RXHASH
igb_rx_hash(rx_ring, rx_desc, skb);
#endif
@@ -7469,187 +7197,8 @@ static int igb_mii_ioctl(struct net_device *netdev,
struct ifreq *ifr, int cmd)
}
return E1000_SUCCESS;
}
-
#endif
-#ifdef HAVE_HW_TIME_STAMP
-/**
- * igb_hwtstamp_ioctl - control hardware time stamping
- * @netdev:
- * @ifreq:
- * @cmd:
- *
- * Outgoing time stamping can be enabled and disabled. Play nice and
- * disable it when requested, although it shouldn't case any overhead
- * when no packet needs it. At most one packet in the queue may be
- * marked for time stamping, otherwise it would be impossible to tell
- * for sure to which packet the hardware time stamp belongs.
- *
- * Incoming time stamping has to be configured via the hardware
- * filters. Not all combinations are supported, in particular event
- * type has to be specified. Matching the kind of event packet is
- * not supported, with the exception of "all V2 events regardless of
- * level 2 or 4".
- *
- **/
-static int igb_hwtstamp_ioctl(struct net_device *netdev,
- struct ifreq *ifr, int cmd)
-{
- struct igb_adapter *adapter = netdev_priv(netdev);
- struct e1000_hw *hw = &adapter->hw;
- struct hwtstamp_config config;
- u32 tsync_tx_ctl = E1000_TSYNCTXCTL_ENABLED;
- u32 tsync_rx_ctl = E1000_TSYNCRXCTL_ENABLED;
- u32 tsync_rx_cfg = 0;
- bool is_l4 = false;
- bool is_l2 = false;
- u32 regval;
-
- if (copy_from_user(&config, ifr->ifr_data, sizeof(config)))
- return -EFAULT;
-
- /* reserved for future extensions */
- if (config.flags)
- return -EINVAL;
- switch (config.tx_type) {
- case HWTSTAMP_TX_OFF:
- tsync_tx_ctl = 0;
- case HWTSTAMP_TX_ON:
- break;
- default:
- return -ERANGE;
- }
-
- switch (config.rx_filter) {
- case HWTSTAMP_FILTER_NONE:
- tsync_rx_ctl = 0;
- break;
- case HWTSTAMP_FILTER_PTP_V1_L4_EVENT:
- case HWTSTAMP_FILTER_PTP_V2_L4_EVENT:
- case HWTSTAMP_FILTER_PTP_V2_L2_EVENT:
- case HWTSTAMP_FILTER_ALL:
- /*
- * register TSYNCRXCFG must be set, therefore it is not
- * possible to time stamp both Sync and Delay_Req messages
- * => fall back to time stamping all packets
- */
- tsync_rx_ctl |= E1000_TSYNCRXCTL_TYPE_ALL;
- config.rx_filter = HWTSTAMP_FILTER_ALL;
- break;
- case HWTSTAMP_FILTER_PTP_V1_L4_SYNC:
- tsync_rx_ctl |= E1000_TSYNCRXCTL_TYPE_L4_V1;
- tsync_rx_cfg = E1000_TSYNCRXCFG_PTP_V1_SYNC_MESSAGE;
- is_l4 = true;
- break;
- case HWTSTAMP_FILTER_PTP_V1_L4_DELAY_REQ:
- tsync_rx_ctl |= E1000_TSYNCRXCTL_TYPE_L4_V1;
- tsync_rx_cfg = E1000_TSYNCRXCFG_PTP_V1_DELAY_REQ_MESSAGE;
- is_l4 = true;
- break;
- case HWTSTAMP_FILTER_PTP_V2_L2_SYNC:
- case HWTSTAMP_FILTER_PTP_V2_L4_SYNC:
- tsync_rx_ctl |= E1000_TSYNCRXCTL_TYPE_L2_L4_V2;
- tsync_rx_cfg = E1000_TSYNCRXCFG_PTP_V2_SYNC_MESSAGE;
- is_l2 = true;
- is_l4 = true;
- config.rx_filter = HWTSTAMP_FILTER_SOME;
- break;
- case HWTSTAMP_FILTER_PTP_V2_L2_DELAY_REQ:
- case HWTSTAMP_FILTER_PTP_V2_L4_DELAY_REQ:
- tsync_rx_ctl |= E1000_TSYNCRXCTL_TYPE_L2_L4_V2;
- tsync_rx_cfg = E1000_TSYNCRXCFG_PTP_V2_DELAY_REQ_MESSAGE;
- is_l2 = true;
- is_l4 = true;
- config.rx_filter = HWTSTAMP_FILTER_SOME;
- break;
- case HWTSTAMP_FILTER_PTP_V2_EVENT:
- case HWTSTAMP_FILTER_PTP_V2_SYNC:
- case HWTSTAMP_FILTER_PTP_V2_DELAY_REQ:
- tsync_rx_ctl |= E1000_TSYNCRXCTL_TYPE_EVENT_V2;
- config.rx_filter = HWTSTAMP_FILTER_PTP_V2_EVENT;
- is_l2 = true;
- is_l4 = true;
- break;
- default:
- return -ERANGE;
- }
-
- if (hw->mac.type == e1000_82575) {
- if (tsync_rx_ctl | tsync_tx_ctl)
- return -EINVAL;
- return 0;
- }
-
-#ifdef IGB_PER_PKT_TIMESTAMP
- /*
- * Per-packet timestamping only works if all packets are
- * timestamped, so enable timestamping in all packets as
- * long as one rx filter was configured.
- */
- if ((hw->mac.type >= e1000_82580) && tsync_rx_ctl) {
- tsync_rx_ctl = E1000_TSYNCRXCTL_ENABLED;
- tsync_rx_ctl |= E1000_TSYNCRXCTL_TYPE_ALL;
- }
-#endif
-
- /* enable/disable TX */
- regval = E1000_READ_REG(hw, E1000_TSYNCTXCTL);
- regval &= ~E1000_TSYNCTXCTL_ENABLED;
- regval |= tsync_tx_ctl;
- E1000_WRITE_REG(hw, E1000_TSYNCTXCTL, regval);
-
- /* enable/disable RX */
- regval = E1000_READ_REG(hw, E1000_TSYNCRXCTL);
- regval &= ~(E1000_TSYNCRXCTL_ENABLED | E1000_TSYNCRXCTL_TYPE_MASK);
- regval |= tsync_rx_ctl;
- E1000_WRITE_REG(hw, E1000_TSYNCRXCTL, regval);
-
- /* define which PTP packets are time stamped */
- E1000_WRITE_REG(hw, E1000_TSYNCRXCFG, tsync_rx_cfg);
-
- /* define ethertype filter for timestamped packets */
- if (is_l2)
- E1000_WRITE_REG(hw, E1000_ETQF(3),
- (E1000_ETQF_FILTER_ENABLE | /* enable filter */
- E1000_ETQF_1588 | /* enable timestamping */
- ETH_P_1588)); /* 1588 eth protocol type */
- else
- E1000_WRITE_REG(hw, E1000_ETQF(3), 0);
-
-#define PTP_PORT 319
- /* L4 Queue Filter[3]: filter by destination port and protocol */
- if (is_l4) {
- u32 ftqf = (IPPROTO_UDP /* UDP */
- | E1000_FTQF_VF_BP /* VF not compared */
- | E1000_FTQF_1588_TIME_STAMP /* Enable Timestamping */
- | E1000_FTQF_MASK); /* mask all inputs */
- ftqf &= ~E1000_FTQF_MASK_PROTO_BP; /* enable protocol check */
-
- E1000_WRITE_REG(hw, E1000_IMIR(3), htons(PTP_PORT));
- E1000_WRITE_REG(hw, E1000_IMIREXT(3),
- (E1000_IMIREXT_SIZE_BP |
E1000_IMIREXT_CTRL_BP));
- if (hw->mac.type == e1000_82576) {
- /* enable source port check */
- E1000_WRITE_REG(hw, E1000_SPQF(3), htons(PTP_PORT));
- ftqf &= ~E1000_FTQF_MASK_SOURCE_PORT_BP;
- }
- E1000_WRITE_REG(hw, E1000_FTQF(3), ftqf);
- } else {
- E1000_WRITE_REG(hw, E1000_FTQF(3), E1000_FTQF_MASK);
- }
- E1000_WRITE_FLUSH(hw);
-
- adapter->hwtstamp_config = config;
-
- /* clear TX/RX time stamp registers, just to be sure */
- regval = E1000_READ_REG(hw, E1000_TXSTMPH);
- regval = E1000_READ_REG(hw, E1000_RXSTMPH);
-
- return copy_to_user(ifr->ifr_data, &config, sizeof(config)) ?
- -EFAULT : 0;
-}
-
-#endif
/**
* igb_ioctl -
* @netdev:
@@ -7665,10 +7214,6 @@ static int igb_ioctl(struct net_device *netdev, struct
ifreq *ifr, int cmd)
case SIOCSMIIREG:
return igb_mii_ioctl(netdev, ifr, cmd);
#endif
-#ifdef HAVE_HW_TIME_STAMP
- case SIOCSHWTSTAMP:
- return igb_hwtstamp_ioctl(netdev, ifr, cmd);
-#endif
#ifdef ETHTOOL_OPS_COMPAT
case SIOCETHTOOL:
return ethtool_ioctl(ifr);
@@ -9036,11 +8581,6 @@ int igb_kni_probe(struct pci_dev *pdev,
}
#endif
-#ifdef HAVE_HW_TIME_STAMP
- /* do hw tstamp init after resetting */
- igb_init_hw_timer(adapter);
-
-#endif
#endif /* NO_KNI */
dev_info(pci_dev_to_dev(pdev), "Intel(R) Gigabit Ethernet Network
Connection\n");
diff --git a/lib/librte_eal/linuxapp/kni/ethtool/igb/kcompat.h
b/lib/librte_eal/linuxapp/kni/ethtool/igb/kcompat.h
index a2aa361..8af7e22 100644
--- a/lib/librte_eal/linuxapp/kni/ethtool/igb/kcompat.h
+++ b/lib/librte_eal/linuxapp/kni/ethtool/igb/kcompat.h
@@ -3040,4 +3040,24 @@ typedef netdev_features_t kni_netdev_features_t;
#else
#define HAVE_FDB_OPS
#endif /* < 3.5.0 */
+
+/*****************************************************************************/
+/* 3.8 */
+
+#ifndef __devinit
+#define __devinit
+#endif
+
+#ifndef __devinitdata
+#define __devinitdata
+#endif
+
+#ifndef __devexit
+#define __devexit
+#endif
+
+#ifndef __devexit_p
+#define __devexit_p
+#endif
+
#endif /* _KCOMPAT_H_ */
--
1.7.10.4
