您好：
我在安装doris上遇到了问题，我安装的版本号是apache-doris-2.0.0-bin-x64.tar.gz，启动fe和be后我在fe的日志里看到一直在报错，be也已经正常的启动了，并且没有找到解决的方案
Be的配置如下
# Licensed to the Apache Software Foundation (ASF) under one
# or more contributor license agreements. See the NOTICE file
# distributed with this work for additional information
# regarding copyright ownership. The ASF licenses this file
# to you under the Apache License, Version 2.0 (the
# "License"); you may not use this file except in compliance
# with the License. You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing,
# software distributed under the License is distributed on an
# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
# KIND, either express or implied. See the License for the
# specific language governing permissions and limitations
# under the License.
CUR_DATE=`date +%Y%m%d-%H%M%S`
PPROF_TMPDIR="$DORIS_HOME/log/"
JAVA_OPTS="-Xmx1024m -DlogPath=$DORIS_HOME/log/jni.log
-Xloggc:$DORIS_HOME/log/be.gc.log.$CUR_DATE -Dsun.java.command=DorisBE
-XX:-CriticalJNINatives -DJDBC_MIN_POOL=1 -DJDBC_MAX_POOL=100
-DJDBC_MAX_IDLE_TIME=300000 -DJDBC_MAX_WAIT_TIME=5000"
# For jdk 9+, this JAVA_OPTS will be used as default JVM options
JAVA_OPTS_FOR_JDK_9="-Xmx1024m -DlogPath=$DORIS_HOME/log/jni.log
-Xlog:gc:$DORIS_HOME/log/be.gc.log.$CUR_DATE -Dsun.java.command=DorisBE
-XX:-CriticalJNINatives -DJDBC_MIN_POOL=1 -DJDBC_MAX_POOL=100
-DJDBC_MAX_IDLE_TIME=300000 -DJDBC_MAX_WAIT_TIME=5000"
# since 1.2, the JAVA_HOME need to be set to run BE process.
# JAVA_HOME=/path/to/jdk/
#
https://github.com/apache/doris/blob/master/docs/zh-CN/community/developer-guide/debug-tool.md#jemalloc-heap-profile
# https://jemalloc.net/jemalloc.3.html
JEMALLOC_CONF="percpu_arena:percpu,background_thread:true,metadata_thp:auto,muzzy_decay_ms:15000,dirty_decay_ms:15000,oversize_threshold:0,lg_tcache_max:20,prof:false,lg_prof_interval:32,lg_prof_sample:19,prof_gdump:false,prof_accum:false,prof_leak:false,prof_final:false"
JEMALLOC_PROF_PRFIX=""
# INFO, WARNING, ERROR, FATAL
sys_log_level = INFO
# ports for admin, web, heartbeat service
be_port = 9060
webserver_port = 8045
heartbeat_service_port = 9050
brpc_port = 8060
# HTTPS configures
enable_https = false
# path of certificate in PEM format.
ssl_certificate_path = "$DORIS_HOME/conf/cert.pem"
# path of private key in PEM format.
ssl_private_key_path = "$DORIS_HOME/conf/key.pem"
# enable auth check
enable_auth = false
# Choose one if there are more than one ip except loopback address.
# Note that there should at most one ip match this list.
# If no ip match this rule, will choose one randomly.
# use CIDR format, e.g. 10.10.10.0/24 or IP format, e.g. 10.10.10.1
# Default value is empty.
# priority_networks = 10.10.10.0/24;192.168.0.0/16
# data root path, separate by ';'
# you can specify the storage medium of each root path, HDD or SSD
# you can add capacity limit at the end of each root path, separate by ','
# eg:
storage_root_path = /home/doris.SSD
# /home/disk1/doris.HDD, capacity limit is 50GB, HDD;
# /home/disk2/doris.SSD, capacity limit is 1GB, SSD;
# /home/disk2/doris, capacity limit is disk capacity, HDD(default)
#
# you also can specify the properties by setting '<property>:<value>', separate
by ','
# property 'medium' has a higher priority than the extension of path
#
# Default value is ${DORIS_HOME}/storage, you should create it by hand.
# storage_root_path = ${DORIS_HOME}/storage
# Default dirs to put jdbc drivers,default value is ${DORIS_HOME}/jdbc_drivers
# jdbc_drivers_dir = ${DORIS_HOME}/jdbc_drivers
# Advanced configurations
# sys_log_dir = ${DORIS_HOME}/log
# sys_log_roll_mode = SIZE-MB-1024
# sys_log_roll_num = 10
# sys_log_verbose_modules = *
# log_buffer_level = -1
# palo_cgroups
从 Windows 版邮件发送
---------------------------------------------------------------------
To unsubscribe, e-mail: dev-unsubscr...@doris.apache.org
For additional commands, e-mail: dev-h...@doris.apache.org
