Public bug reported:
~$ dmesg | grep ata
[ 0.000000] BIOS-e820: [mem 0x00000000cffc0000-0x00000000cffcdfff] ACPI data
[ 0.000000] Memory: 8092964k/9175040k available (7006k kernel code, 787140k
absent, 294936k reserved, 6238k data, 992k init)
[ 0.239391] libata version 3.00 loaded.
[ 0.702411] acpi-cpufreq: overriding BIOS provided _PSD data
[ 0.704006] Write protecting the kernel read-only data: 12288k
[ 0.754374] sata_nv 0000:00:08.0: version 3.5
[ 0.754603] sata_nv 0000:00:08.0: setting latency timer to 64
[ 0.754785] scsi0 : sata_nv
[ 0.754925] scsi1 : sata_nv
[ 0.755000] ata1: SATA max UDMA/133 cmd 0xc000 ctl 0xbc00 bmdma 0xb480 irq 21
[ 0.755002] ata2: SATA max UDMA/133 cmd 0xb880 ctl 0xb800 bmdma 0xb488 irq 21
[ 0.755247] sata_nv 0000:00:08.1: setting latency timer to 64
[ 0.755487] scsi2 : sata_nv
[ 0.755569] scsi3 : sata_nv
[ 0.755603] ata3: SATA max UDMA/133 cmd 0xb400 ctl 0xb080 bmdma 0xa880 irq 20
[ 0.755605] ata4: SATA max UDMA/133 cmd 0xb000 ctl 0xac00 bmdma 0xa888 irq 20
[ 0.756224] pata_amd 0000:00:06.0: version 0.4.1
[ 0.756264] pata_amd 0000:00:06.0: setting latency timer to 64
[ 0.756788] scsi4 : pata_amd
[ 0.757162] scsi5 : pata_amd
[ 0.757379] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 0.757381] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 1.218358] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.222348] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.226452] ata1.00: ATAPI: ATAPI iHOS104, WL0F, max UDMA/100
[ 1.230551] ata3.00: ATA-8: SAMSUNG HD105SI, 1AJ10001, max UDMA/133
[ 1.230556] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.238537] ata3.00: configured for UDMA/133
[ 1.242414] ata1.00: configured for UDMA/100
[ 6.230792] ata1.00: qc timeout (cmd 0xa0)
[ 6.230797] ata1.00: TEST_UNIT_READY failed (err_mask=0x5)
[ 6.697724] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 6.721781] ata1.00: configured for UDMA/100
[ 11.710153] ata1.00: qc timeout (cmd 0xa0)
[ 11.710159] ata1.00: TEST_UNIT_READY failed (err_mask=0x5)
[ 11.710162] ata1: limiting SATA link speed to 1.5 Gbps
[ 11.710164] ata1.00: limiting speed to UDMA/100:PIO3
[ 12.177098] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 12.201161] ata1.00: configured for UDMA/100
[ 17.189532] ata1.00: qc timeout (cmd 0xa0)
[ 17.189537] ata1.00: TEST_UNIT_READY failed (err_mask=0x5)
[ 17.189538] ata1.00: disabled
[ 17.189548] ata1: hard resetting link
[ 17.189549] ata1: nv: skipping hardreset on occupied port
[ 17.656472] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 17.656482] ata1: EH complete
[ 17.977970] ata2: SATA link down (SStatus 0 SControl 300)
[ 18.442679] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 18.450775] ata4.00: ATAPI: TSSTcorp CDDVDW SH-S223C, SB04, max UDMA/100
[ 18.466727] ata4.00: configured for UDMA/100
[ 18.472692] ata6: port disabled--ignoring
[ 19.800484] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts:
(null)
ProblemType: Bug
DistroRelease: Ubuntu 13.04
Package: gnome-control-center 1:3.6.3-0ubuntu19
ProcVersionSignature: Ubuntu 3.8.0-17.27-generic 3.8.6
Uname: Linux 3.8.0-17-generic x86_64
NonfreeKernelModules: nvidia
ApportVersion: 2.9.2-0ubuntu5
Architecture: amd64
Date: Sat Apr 13 07:20:55 2013
InstallationDate: Installed on 2013-03-26 (17 days ago)
InstallationMedia: Ubuntu 13.04 "Raring Ringtail" - Alpha amd64 (20130326)
MarkForUpload: True
SourcePackage: gnome-control-center
UpgradeStatus: No upgrade log present (probably fresh install)
usr_lib_gnome-control-center:
activity-log-manager-control-center 0.9.4-0ubuntu6.1
deja-dup 26.0-0ubuntu1
gnome-control-center-signon 0.1.6bzr13.04.05-0ubuntu1
gnome-control-center-unity 1.2daily13.04.09-0ubuntu1
indicator-datetime 12.10.3daily13.03.26-0ubuntu1
** Affects: gnome-control-center (Ubuntu)
Importance: Undecided
Status: New
** Tags: amd64 apport-bug raring
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to gnome-control-center in Ubuntu.
https://bugs.launchpad.net/bugs/1168609
Title:
Lite-On IHOS104 sata blu ray reader not detected in Ubuntu
Status in “gnome-control-center” package in Ubuntu:
New
Bug description:
~$ dmesg | grep ata
[ 0.000000] BIOS-e820: [mem 0x00000000cffc0000-0x00000000cffcdfff] ACPI
data
[ 0.000000] Memory: 8092964k/9175040k available (7006k kernel code,
787140k absent, 294936k reserved, 6238k data, 992k init)
[ 0.239391] libata version 3.00 loaded.
[ 0.702411] acpi-cpufreq: overriding BIOS provided _PSD data
[ 0.704006] Write protecting the kernel read-only data: 12288k
[ 0.754374] sata_nv 0000:00:08.0: version 3.5
[ 0.754603] sata_nv 0000:00:08.0: setting latency timer to 64
[ 0.754785] scsi0 : sata_nv
[ 0.754925] scsi1 : sata_nv
[ 0.755000] ata1: SATA max UDMA/133 cmd 0xc000 ctl 0xbc00 bmdma 0xb480 irq
21
[ 0.755002] ata2: SATA max UDMA/133 cmd 0xb880 ctl 0xb800 bmdma 0xb488 irq
21
[ 0.755247] sata_nv 0000:00:08.1: setting latency timer to 64
[ 0.755487] scsi2 : sata_nv
[ 0.755569] scsi3 : sata_nv
[ 0.755603] ata3: SATA max UDMA/133 cmd 0xb400 ctl 0xb080 bmdma 0xa880 irq
20
[ 0.755605] ata4: SATA max UDMA/133 cmd 0xb000 ctl 0xac00 bmdma 0xa888 irq
20
[ 0.756224] pata_amd 0000:00:06.0: version 0.4.1
[ 0.756264] pata_amd 0000:00:06.0: setting latency timer to 64
[ 0.756788] scsi4 : pata_amd
[ 0.757162] scsi5 : pata_amd
[ 0.757379] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 0.757381] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 1.218358] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.222348] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.226452] ata1.00: ATAPI: ATAPI iHOS104, WL0F, max UDMA/100
[ 1.230551] ata3.00: ATA-8: SAMSUNG HD105SI, 1AJ10001, max UDMA/133
[ 1.230556] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.238537] ata3.00: configured for UDMA/133
[ 1.242414] ata1.00: configured for UDMA/100
[ 6.230792] ata1.00: qc timeout (cmd 0xa0)
[ 6.230797] ata1.00: TEST_UNIT_READY failed (err_mask=0x5)
[ 6.697724] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 6.721781] ata1.00: configured for UDMA/100
[ 11.710153] ata1.00: qc timeout (cmd 0xa0)
[ 11.710159] ata1.00: TEST_UNIT_READY failed (err_mask=0x5)
[ 11.710162] ata1: limiting SATA link speed to 1.5 Gbps
[ 11.710164] ata1.00: limiting speed to UDMA/100:PIO3
[ 12.177098] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 12.201161] ata1.00: configured for UDMA/100
[ 17.189532] ata1.00: qc timeout (cmd 0xa0)
[ 17.189537] ata1.00: TEST_UNIT_READY failed (err_mask=0x5)
[ 17.189538] ata1.00: disabled
[ 17.189548] ata1: hard resetting link
[ 17.189549] ata1: nv: skipping hardreset on occupied port
[ 17.656472] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 17.656482] ata1: EH complete
[ 17.977970] ata2: SATA link down (SStatus 0 SControl 300)
[ 18.442679] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 18.450775] ata4.00: ATAPI: TSSTcorp CDDVDW SH-S223C, SB04, max UDMA/100
[ 18.466727] ata4.00: configured for UDMA/100
[ 18.472692] ata6: port disabled--ignoring
[ 19.800484] EXT4-fs (sda1): mounted filesystem with ordered data mode.
Opts: (null)
ProblemType: Bug
DistroRelease: Ubuntu 13.04
Package: gnome-control-center 1:3.6.3-0ubuntu19
ProcVersionSignature: Ubuntu 3.8.0-17.27-generic 3.8.6
Uname: Linux 3.8.0-17-generic x86_64
NonfreeKernelModules: nvidia
ApportVersion: 2.9.2-0ubuntu5
Architecture: amd64
Date: Sat Apr 13 07:20:55 2013
InstallationDate: Installed on 2013-03-26 (17 days ago)
InstallationMedia: Ubuntu 13.04 "Raring Ringtail" - Alpha amd64 (20130326)
MarkForUpload: True
SourcePackage: gnome-control-center
UpgradeStatus: No upgrade log present (probably fresh install)
usr_lib_gnome-control-center:
activity-log-manager-control-center 0.9.4-0ubuntu6.1
deja-dup 26.0-0ubuntu1
gnome-control-center-signon 0.1.6bzr13.04.05-0ubuntu1
gnome-control-center-unity 1.2daily13.04.09-0ubuntu1
indicator-datetime 12.10.3daily13.03.26-0ubuntu1
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/gnome-control-center/+bug/1168609/+subscriptions
--
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help : https://help.launchpad.net/ListHelp
