Package: xserver-xorg-core Version: 2:21.1.16-1.3 Severity: normal X-Debbugs-Cc: [email protected]
Dear Maintainer, * What led up to the situation? Xorg keeps crashing when I leave my session idle. To try to turn off the screen saver, I ran from a fresh XFCE4 session: killall light-locker xset s off xset -dpms * What was the outcome of this action? The last of those commands triggered Xorg to segfault. * What outcome did you expect instead? Xorg to disable display power management, and not crash. -- Package-specific info: /etc/X11/X does not exist. /etc/X11/X is not a symlink. /etc/X11/X is not executable. VGA-compatible devices on PCI bus: ---------------------------------- 00:02.0 VGA compatible controller [0300]: Intel Corporation Atom Processor D4xx/D5xx/N4xx/N5xx Integrated Graphics Controller [8086:a011] /etc/X11/xorg.conf does not exist. Contents of /etc/X11/xorg.conf.d: --------------------------------- total 0 /etc/modprobe.d contains no KMS configuration files. Kernel version (/proc/version): ------------------------------- Linux version 6.12.43+deb13-amd64 ([email protected]) (x86_64-linux-gnu-gcc-14 (Debian 14.2.0-19) 14.2.0, GNU ld (GNU Binutils for Debian) 2.44) #1 SMP PREEMPT_DYNAMIC Debian 6.12.43-1 (2025-08-27) Xorg X server log files on system: ---------------------------------- -rw-r--r-- 1 root root 22023 Aug 25 20:24 /var/log/Xorg.1.log -rw-r--r-- 1 root root 22378 Sep 10 20:01 /var/log/Xorg.0.log Contents of previous Xorg X server log file (/var/log/Xorg.0.log.old): ---------------------------------------------------------------------- [ 3859.829] X.Org X Server 1.21.1.16 X Protocol Version 11, Revision 0 [ 3859.829] Current Operating System: Linux tallat 6.12.43+deb13-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.12.43-1 (2025-08-27) x86_64 [ 3859.829] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-6.12.43+deb13-amd64 root=UUID=032dcfa4-a56f-429d-a1f0-5c534dc29f13 ro quiet [ 3859.830] xorg-server 2:21.1.16-1.3 (https://www.debian.org/support) [ 3859.830] Current version of pixman: 0.44.0 [ 3859.830] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 3859.830] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 3859.830] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Sep 10 19:49:22 2025 [ 3859.832] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 3859.833] (==) No Layout section. Using the first Screen section. [ 3859.833] (==) No screen section available. Using defaults. [ 3859.833] (**) |-->Screen "Default Screen Section" (0) [ 3859.833] (**) | |-->Monitor "<default monitor>" [ 3859.835] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 3859.835] (**) Allowing byte-swapped clients [ 3859.835] (==) Automatically adding devices [ 3859.835] (==) Automatically enabling devices [ 3859.835] (==) Automatically adding GPU devices [ 3859.835] (==) Automatically binding GPU devices [ 3859.835] (==) Max clients allowed: 256, resource mask: 0x1fffff [ 3859.836] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. [ 3859.836] Entry deleted from font path. [ 3859.836] (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/100dpi/:unscaled, /usr/share/fonts/X11/75dpi/:unscaled, /usr/share/fonts/X11/Type1, /usr/share/fonts/X11/100dpi, /usr/share/fonts/X11/75dpi, built-ins [ 3859.836] (==) ModulePath set to "/usr/lib/xorg/modules" [ 3859.836] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 3859.836] (II) Loader magic: 0x5609c8158f00 [ 3859.836] (II) Module ABI versions: [ 3859.836] X.Org ANSI C Emulation: 0.4 [ 3859.836] X.Org Video Driver: 25.2 [ 3859.836] X.Org XInput driver : 24.4 [ 3859.837] X.Org Server Extension : 10.0 [ 3859.842] (++) using VT number 7 [ 3859.842] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration [ 3859.849] (II) xfree86: Adding drm device (/dev/dri/card0) [ 3859.850] (II) Platform probe for /sys/devices/pci0000:00/0000:00:02.0/drm/card0 [ 3859.881] (--) PCI:*(0@0:2:0) 8086:a011:1025:0349 rev 0, Mem @ 0x98180000/524288, 0x80000000/268435456, 0x98000000/1048576, I/O @ 0x000060c0/8, BIOS @ 0x????????/131072 [ 3859.881] (--) PCI: (0@0:2:1) 8086:a012:1025:0349 rev 0, Mem @ 0x98100000/524288 [ 3859.881] (II) LoadModule: "glx" [ 3859.882] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 3859.890] (II) Module glx: vendor="X.Org Foundation" [ 3859.890] compiled for 1.21.1.16, module version = 1.0.0 [ 3859.890] ABI class: X.Org Server Extension, version 10.0 [ 3859.890] (==) Matched intel as autoconfigured driver 0 [ 3859.890] (==) Matched modesetting as autoconfigured driver 1 [ 3859.890] (==) Matched fbdev as autoconfigured driver 2 [ 3859.890] (==) Matched vesa as autoconfigured driver 3 [ 3859.890] (==) Assigned the driver to the xf86ConfigLayout [ 3859.890] (II) LoadModule: "intel" [ 3859.891] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so [ 3859.894] (II) Module intel: vendor="X.Org Foundation" [ 3859.894] compiled for 1.21.1.3, module version = 2.99.917 [ 3859.894] Module class: X.Org Video Driver [ 3859.894] ABI class: X.Org Video Driver, version 25.2 [ 3859.894] (II) LoadModule: "modesetting" [ 3859.895] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so [ 3859.895] (II) Module modesetting: vendor="X.Org Foundation" [ 3859.896] compiled for 1.21.1.16, module version = 1.21.1 [ 3859.896] Module class: X.Org Video Driver [ 3859.896] ABI class: X.Org Video Driver, version 25.2 [ 3859.896] (II) LoadModule: "fbdev" [ 3859.897] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so [ 3859.897] (II) Module fbdev: vendor="X.Org Foundation" [ 3859.897] compiled for 1.21.1.3, module version = 0.5.0 [ 3859.897] Module class: X.Org Video Driver [ 3859.898] ABI class: X.Org Video Driver, version 25.2 [ 3859.898] (II) LoadModule: "vesa" [ 3859.898] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so [ 3859.899] (II) Module vesa: vendor="X.Org Foundation" [ 3859.899] compiled for 1.21.1.15, module version = 2.6.0 [ 3859.899] Module class: X.Org Video Driver [ 3859.899] ABI class: X.Org Video Driver, version 25.2 [ 3859.899] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, 4 Series, G45/G43, Q45/Q43, G41, B43 [ 3859.901] (II) intel: Driver for Intel(R) HD Graphics [ 3859.901] (II) intel: Driver for Intel(R) Iris(TM) Graphics [ 3859.901] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics [ 3859.902] (II) modesetting: Driver for Modesetting Kernel Drivers: kms [ 3859.902] (II) FBDEV: driver for framebuffer: fbdev [ 3859.902] (II) VESA: driver for VESA chipsets: vesa [ 3859.903] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 0 [ 3859.903] (II) intel(0): SNA compiled: xserver-xorg-video-intel 2:2.99.917+git20210115-1 (Timo Aaltonen <[email protected]>) [ 3859.903] (II) intel(0): SNA compiled for use with valgrind [ 3859.904] (WW) Falling back to old probe method for modesetting [ 3859.904] (WW) Falling back to old probe method for fbdev [ 3859.905] (II) Loading sub module "fbdevhw" [ 3859.905] (II) LoadModule: "fbdevhw" [ 3859.905] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so [ 3859.906] (II) Module fbdevhw: vendor="X.Org Foundation" [ 3859.906] compiled for 1.21.1.16, module version = 0.0.2 [ 3859.906] ABI class: X.Org Video Driver, version 25.2 [ 3859.908] (--) intel(0): Integrated Graphics Chipset: Intel(R) Pineview GM [ 3859.908] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3; using a maximum of 1 threads [ 3859.908] (II) intel(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [ 3859.909] (==) intel(0): Depth 24, (--) framebuffer bpp 32 [ 3859.909] (==) intel(0): RGB weight 888 [ 3859.909] (==) intel(0): Default visual is TrueColor [ 3859.911] (II) intel(0): Output LVDS1 has no monitor section [ 3859.914] (--) intel(0): Found backlight control interface acpi_video0 (type 'firmware') for output LVDS1 [ 3859.914] (II) intel(0): Enabled output LVDS1 [ 3859.914] (II) intel(0): Output VGA1 has no monitor section [ 3859.915] (II) intel(0): Enabled output VGA1 [ 3859.915] (--) intel(0): Using a maximum size of 256x256 for hardware cursors [ 3859.916] (II) intel(0): Output VIRTUAL1 has no monitor section [ 3859.916] (II) intel(0): Enabled output VIRTUAL1 [ 3859.916] (--) intel(0): Output LVDS1 using initial mode 1024x600 on pipe 1 [ 3859.917] (==) intel(0): TearFree disabled [ 3859.917] (==) intel(0): Using gamma correction (1.0, 1.0, 1.0) [ 3859.917] (==) intel(0): DPI set to (96, 96) [ 3859.917] (II) Loading sub module "dri3" [ 3859.917] (II) LoadModule: "dri3" [ 3859.917] (II) Module "dri3" already built-in [ 3859.917] (II) Loading sub module "dri2" [ 3859.917] (II) LoadModule: "dri2" [ 3859.918] (II) Module "dri2" already built-in [ 3859.918] (II) Loading sub module "present" [ 3859.918] (II) LoadModule: "present" [ 3859.918] (II) Module "present" already built-in [ 3859.918] (II) UnloadModule: "modesetting" [ 3859.918] (II) Unloading modesetting [ 3859.918] (II) UnloadModule: "fbdev" [ 3859.918] (II) Unloading fbdev [ 3859.919] (II) UnloadSubModule: "fbdevhw" [ 3859.919] (II) Unloading fbdevhw [ 3859.919] (II) UnloadModule: "vesa" [ 3859.919] (II) Unloading vesa [ 3859.920] (II) intel(0): SNA initialized with Alviso (gen3) backend [ 3859.920] (==) intel(0): Backing store enabled [ 3859.920] (==) intel(0): Silken mouse enabled [ 3859.920] (II) intel(0): HW Cursor enabled [ 3859.921] (==) intel(0): DPMS enabled [ 3859.922] (==) intel(0): Display hotplug detection enabled [ 3859.922] (II) intel(0): [XvMC] i915_xvmc driver initialized. [ 3859.922] (II) intel(0): [DRI2] Setup complete [ 3859.922] (II) intel(0): [DRI2] DRI driver: i915 [ 3859.922] (II) intel(0): [DRI2] VDPAU driver: va_gl [ 3859.922] (II) intel(0): direct rendering: DRI2 enabled [ 3859.922] (II) intel(0): hardware support for Present enabled [ 3859.922] (II) Initializing extension Generic Event Extension [ 3859.923] (II) Initializing extension SHAPE [ 3859.924] (II) Initializing extension MIT-SHM [ 3859.925] (II) Initializing extension XInputExtension [ 3859.926] (II) Initializing extension XTEST [ 3859.927] (II) Initializing extension BIG-REQUESTS [ 3859.928] (II) Initializing extension SYNC [ 3859.929] (II) Initializing extension XKEYBOARD [ 3859.930] (II) Initializing extension XC-MISC [ 3859.930] (II) Initializing extension SECURITY [ 3859.931] (II) Initializing extension XFIXES [ 3859.932] (II) Initializing extension RENDER [ 3859.933] (II) Initializing extension RANDR [ 3859.935] (II) Initializing extension COMPOSITE [ 3859.936] (II) Initializing extension DAMAGE [ 3859.937] (II) Initializing extension MIT-SCREEN-SAVER [ 3859.938] (II) Initializing extension DOUBLE-BUFFER [ 3859.939] (II) Initializing extension RECORD [ 3859.940] (II) Initializing extension DPMS [ 3859.941] (II) Initializing extension Present [ 3859.942] (II) Initializing extension DRI3 [ 3859.942] (II) Initializing extension X-Resource [ 3859.943] (II) Initializing extension XVideo [ 3859.944] (II) Initializing extension XVideo-MotionCompensation [ 3859.945] (II) Initializing extension SELinux [ 3859.945] (II) SELinux: Disabled on system [ 3859.945] (II) Initializing extension GLX [ 3860.191] (II) AIGLX: Loaded and initialized i915 [ 3860.192] (II) GLX: Initialized DRI2 GL provider for screen 0 [ 3860.192] (II) Initializing extension XFree86-VidModeExtension [ 3860.192] (II) Initializing extension XFree86-DGA [ 3860.193] (II) Initializing extension XFree86-DRI [ 3860.193] (II) Initializing extension DRI2 [ 3860.202] (II) intel(0): switch to mode [email protected] on LVDS1 using pipe 1, position (0, 0), rotation normal, reflection none [ 3860.208] (II) intel(0): Setting screen physical size to 270 x 158 [ 3860.496] (II) config/udev: Adding input device Power Button (/dev/input/event4) [ 3860.496] (**) Power Button: Applying InputClass "libinput keyboard catchall" [ 3860.497] (II) LoadModule: "libinput" [ 3860.497] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so [ 3860.507] (II) Module libinput: vendor="X.Org Foundation" [ 3860.507] compiled for 1.21.1.15, module version = 1.5.0 [ 3860.507] Module class: X.Org XInput Driver [ 3860.507] ABI class: X.Org XInput driver, version 24.4 [ 3860.507] (II) Using input driver 'libinput' for 'Power Button' [ 3860.507] (**) Power Button: always reports core events [ 3860.507] (**) Option "Device" "/dev/input/event4" [ 3860.523] (II) event4 - Power Button: is tagged by udev as: Keyboard [ 3860.523] (II) event4 - Power Button: device is a keyboard [ 3860.524] (II) event4 - Power Button: device removed [ 3860.544] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event4" [ 3860.544] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6) [ 3860.544] (**) Option "xkb_model" "pc105" [ 3860.544] (**) Option "xkb_layout" "gb" [ 3860.640] (II) event4 - Power Button: is tagged by udev as: Keyboard [ 3860.640] (II) event4 - Power Button: device is a keyboard [ 3860.645] (II) config/udev: Adding input device Video Bus (/dev/input/event6) [ 3860.645] (**) Video Bus: Applying InputClass "libinput keyboard catchall" [ 3860.645] (II) Using input driver 'libinput' for 'Video Bus' [ 3860.645] (**) Video Bus: always reports core events [ 3860.645] (**) Option "Device" "/dev/input/event6" [ 3860.651] (II) event6 - Video Bus: is tagged by udev as: Keyboard [ 3860.652] (II) event6 - Video Bus: device is a keyboard [ 3860.653] (II) event6 - Video Bus: device removed [ 3860.688] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7/event6" [ 3860.688] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7) [ 3860.688] (**) Option "xkb_model" "pc105" [ 3860.688] (**) Option "xkb_layout" "gb" [ 3860.694] (II) event6 - Video Bus: is tagged by udev as: Keyboard [ 3860.695] (II) event6 - Video Bus: device is a keyboard [ 3860.699] (II) config/udev: Adding input device Power Button (/dev/input/event1) [ 3860.699] (**) Power Button: Applying InputClass "libinput keyboard catchall" [ 3860.699] (II) Using input driver 'libinput' for 'Power Button' [ 3860.699] (**) Power Button: always reports core events [ 3860.699] (**) Option "Device" "/dev/input/event1" [ 3860.705] (II) event1 - Power Button: is tagged by udev as: Keyboard [ 3860.705] (II) event1 - Power Button: device is a keyboard [ 3860.706] (II) event1 - Power Button: device removed [ 3860.720] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2/event1" [ 3860.720] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8) [ 3860.720] (**) Option "xkb_model" "pc105" [ 3860.720] (**) Option "xkb_layout" "gb" [ 3860.726] (II) event1 - Power Button: is tagged by udev as: Keyboard [ 3860.726] (II) event1 - Power Button: device is a keyboard [ 3860.731] (II) config/udev: Adding input device Lid Switch (/dev/input/event3) [ 3860.731] (II) No input driver specified, ignoring this device. [ 3860.731] (II) This device may have been added with another device file. [ 3860.734] (II) config/udev: Adding input device Sleep Button (/dev/input/event2) [ 3860.734] (**) Sleep Button: Applying InputClass "libinput keyboard catchall" [ 3860.734] (II) Using input driver 'libinput' for 'Sleep Button' [ 3860.734] (**) Sleep Button: always reports core events [ 3860.735] (**) Option "Device" "/dev/input/event2" [ 3860.740] (II) event2 - Sleep Button: is tagged by udev as: Keyboard [ 3860.740] (II) event2 - Sleep Button: device is a keyboard [ 3860.741] (II) event2 - Sleep Button: device removed [ 3860.756] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3/event2" [ 3860.756] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9) [ 3860.756] (**) Option "xkb_model" "pc105" [ 3860.756] (**) Option "xkb_layout" "gb" [ 3860.762] (II) event2 - Sleep Button: is tagged by udev as: Keyboard [ 3860.762] (II) event2 - Sleep Button: device is a keyboard [ 3860.768] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event9) [ 3860.768] (II) No input driver specified, ignoring this device. [ 3860.768] (II) This device may have been added with another device file. [ 3860.770] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event10) [ 3860.771] (II) No input driver specified, ignoring this device. [ 3860.771] (II) This device may have been added with another device file. [ 3860.773] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event11) [ 3860.773] (II) No input driver specified, ignoring this device. [ 3860.773] (II) This device may have been added with another device file. [ 3860.777] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0) [ 3860.777] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall" [ 3860.777] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard' [ 3860.777] (**) AT Translated Set 2 keyboard: always reports core events [ 3860.777] (**) Option "Device" "/dev/input/event0" [ 3860.783] (II) event0 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard [ 3860.784] (II) event0 - AT Translated Set 2 keyboard: device is a keyboard [ 3860.787] (II) event0 - AT Translated Set 2 keyboard: device removed [ 3860.820] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0" [ 3860.820] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10) [ 3860.820] (**) Option "xkb_model" "pc105" [ 3860.820] (**) Option "xkb_layout" "gb" [ 3860.827] (II) event0 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard [ 3860.827] (II) event0 - AT Translated Set 2 keyboard: device is a keyboard [ 3860.835] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event5) [ 3860.835] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "libinput touchpad catchall" [ 3860.835] (II) Using input driver 'libinput' for 'SynPS/2 Synaptics TouchPad' [ 3860.835] (**) SynPS/2 Synaptics TouchPad: always reports core events [ 3860.835] (**) Option "Device" "/dev/input/event5" [ 3860.841] (II) event5 - SynPS/2 Synaptics TouchPad: is tagged by udev as: Touchpad [ 3860.850] (II) event5 - SynPS/2 Synaptics TouchPad: device is a touchpad [ 3860.851] (II) event5 - SynPS/2 Synaptics TouchPad: device removed [ 3860.888] (II) libinput: SynPS/2 Synaptics TouchPad: Step value 0 was provided, libinput Fallback acceleration function is used. [ 3860.888] (II) libinput: SynPS/2 Synaptics TouchPad: Step value 0 was provided, libinput Fallback acceleration function is used. [ 3860.888] (II) libinput: SynPS/2 Synaptics TouchPad: Step value 0 was provided, libinput Fallback acceleration function is used. [ 3860.890] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input6/event5" [ 3860.890] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 11) [ 3860.897] (**) Option "AccelerationScheme" "none" [ 3860.897] (**) SynPS/2 Synaptics TouchPad: (accel) selected scheme none/0 [ 3860.897] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000 [ 3860.897] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4 [ 3860.903] (II) event5 - SynPS/2 Synaptics TouchPad: is tagged by udev as: Touchpad [ 3860.912] (II) event5 - SynPS/2 Synaptics TouchPad: device is a touchpad [ 3860.917] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0) [ 3860.917] (II) No input driver specified, ignoring this device. [ 3860.917] (II) This device may have been added with another device file. [ 3860.920] (II) config/udev: Adding input device PC Speaker (/dev/input/event7) [ 3860.920] (II) No input driver specified, ignoring this device. [ 3860.920] (II) This device may have been added with another device file. [ 3860.925] (II) config/udev: Adding input device Acer WMI hotkeys (/dev/input/event8) [ 3860.925] (**) Acer WMI hotkeys: Applying InputClass "libinput keyboard catchall" [ 3860.925] (II) Using input driver 'libinput' for 'Acer WMI hotkeys' [ 3860.925] (**) Acer WMI hotkeys: always reports core events [ 3860.925] (**) Option "Device" "/dev/input/event8" [ 3860.929] (II) event8 - Acer WMI hotkeys: is tagged by udev as: Keyboard [ 3860.929] (II) event8 - Acer WMI hotkeys: device is a keyboard [ 3860.931] (II) event8 - Acer WMI hotkeys: device removed [ 3860.948] (**) Option "config_info" "udev:/sys/devices/virtual/input/input9/event8" [ 3860.948] (II) XINPUT: Adding extended input device "Acer WMI hotkeys" (type: KEYBOARD, id 12) [ 3860.948] (**) Option "xkb_model" "pc105" [ 3860.948] (**) Option "xkb_layout" "gb" [ 3860.953] (II) event8 - Acer WMI hotkeys: is tagged by udev as: Keyboard [ 3860.953] (II) event8 - Acer WMI hotkeys: device is a keyboard [ 3861.923] (II) intel(0): EDID vendor "AUO", prod id 25042 [ 3861.923] (II) intel(0): Printing DDC gathered Modelines: [ 3861.923] (II) intel(0): Modeline "1024x600"x0.0 49.80 1024 1072 1104 1338 600 602 608 620 -hsync -vsync (37.2 kHz eP) [ 3870.037] (II) Axis 0x1 value 1199 is outside expected range [1247, 4778] See https://wayland.freedesktop.org/libinput/doc/1.28.1/absolute_coordinate_ranges.html for details [ 3873.544] (II) event4 - Power Button: device removed [ 3873.560] (II) event6 - Video Bus: device removed [ 3873.608] (II) event1 - Power Button: device removed [ 3873.624] (II) event2 - Sleep Button: device removed [ 3873.640] (II) event0 - AT Translated Set 2 keyboard: device removed [ 3873.656] (II) event5 - SynPS/2 Synaptics TouchPad: device removed [ 3873.688] (II) event8 - Acer WMI hotkeys: device removed [ 3873.704] (II) AIGLX: Suspending AIGLX clients for VT switch [ 4447.613] (II) AIGLX: Resuming AIGLX clients after VT switch [ 4447.614] (II) intel(0): switch to mode [email protected] on LVDS1 using pipe 1, position (0, 0), rotation normal, reflection none [ 4447.697] (II) event4 - Power Button: is tagged by udev as: Keyboard [ 4447.699] (II) event4 - Power Button: device is a keyboard [ 4447.710] (II) event6 - Video Bus: is tagged by udev as: Keyboard [ 4447.711] (II) event6 - Video Bus: device is a keyboard [ 4447.720] (II) event1 - Power Button: is tagged by udev as: Keyboard [ 4447.721] (II) event1 - Power Button: device is a keyboard [ 4447.733] (II) event2 - Sleep Button: is tagged by udev as: Keyboard [ 4447.733] (II) event2 - Sleep Button: device is a keyboard [ 4447.747] (II) event0 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard [ 4447.750] (II) event0 - AT Translated Set 2 keyboard: device is a keyboard [ 4447.764] (II) event5 - SynPS/2 Synaptics TouchPad: is tagged by udev as: Touchpad [ 4447.777] (II) event5 - SynPS/2 Synaptics TouchPad: device is a touchpad [ 4447.785] (II) event8 - Acer WMI hotkeys: is tagged by udev as: Keyboard [ 4447.786] (II) event8 - Acer WMI hotkeys: device is a keyboard [ 4472.428] (II) Axis 0x1 value 949 is outside expected range [1247, 4778] See https://wayland.freedesktop.org/libinput/doc/1.28.1/absolute_coordinate_ranges.html for details [ 4477.120] (EE) [ 4477.120] (EE) Backtrace: [ 4477.122] (EE) 0: /usr/lib/xorg/Xorg (OsSigHandler+0x2d) [0x5609c80c3c6d] [ 4477.128] (EE) unw_get_proc_name failed: no unwind info found [-10] [ 4477.129] (EE) 1: /lib/x86_64-linux-gnu/libc.so.6 (?+0x0) [0x7f3dff5b2df0] [ 4477.131] (EE) 2: /lib/x86_64-linux-gnu/libpciaccess.so.0 (pci_device_vgaarb_set_target+0x113) [0x7f3dffab29b3] [ 4477.132] (EE) 3: /usr/lib/xorg/Xorg (xf86VGAarbiterLock+0x20) [0x5609c7fa3a80] [ 4477.134] (EE) 4: /usr/lib/xorg/Xorg (xf86DPMS+0x38) [0x5609c7f86bd8] [ 4477.135] (EE) 5: /usr/lib/xorg/Xorg (DPMSSet+0x66) [0x5609c7ffc616] [ 4477.136] (EE) 6: /usr/lib/xorg/Xorg (ProcDPMSDispatch+0xd2) [0x5609c7ffc772] [ 4477.138] (EE) 7: /usr/lib/xorg/Xorg (Dispatch+0x2fb) [0x5609c7f46c0b] [ 4477.139] (EE) 8: /usr/lib/xorg/Xorg (dix_main+0x394) [0x5609c7f4acd4] [ 4477.142] (EE) 9: /lib/x86_64-linux-gnu/libc.so.6 (__libc_start_call_main+0x78) [0x7f3dff59cca8] [ 4477.144] (EE) 10: /lib/x86_64-linux-gnu/libc.so.6 (__libc_start_main_alias_2+0x85) [0x7f3dff59cd65] [ 4477.145] (EE) 11: /usr/lib/xorg/Xorg (_start+0x21) [0x5609c7f33641] [ 4477.146] (EE) [ 4477.146] (EE) Segmentation fault at address 0x30 [ 4477.146] (EE) Fatal server error: [ 4477.146] (EE) Caught signal 11 (Segmentation fault). Server aborting [ 4477.146] (EE) [ 4477.146] (EE) Please consult the The X.Org Foundation support at http://wiki.x.org for help. [ 4477.147] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information. [ 4477.147] (EE) Contents of most recent Xorg X server log file (/var/log/Xorg.0.log): --------------------------------------------------------------------- [ 4477.550] X.Org X Server 1.21.1.16 X Protocol Version 11, Revision 0 [ 4477.550] Current Operating System: Linux tallat 6.12.43+deb13-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.12.43-1 (2025-08-27) x86_64 [ 4477.550] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-6.12.43+deb13-amd64 root=UUID=032dcfa4-a56f-429d-a1f0-5c534dc29f13 ro quiet [ 4477.550] xorg-server 2:21.1.16-1.3 (https://www.debian.org/support) [ 4477.550] Current version of pixman: 0.44.0 [ 4477.550] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 4477.550] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 4477.551] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Sep 10 19:59:39 2025 [ 4477.551] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 4477.552] (==) No Layout section. Using the first Screen section. [ 4477.552] (==) No screen section available. Using defaults. [ 4477.553] (**) |-->Screen "Default Screen Section" (0) [ 4477.553] (**) | |-->Monitor "<default monitor>" [ 4477.554] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 4477.554] (**) Allowing byte-swapped clients [ 4477.554] (==) Automatically adding devices [ 4477.554] (==) Automatically enabling devices [ 4477.554] (==) Automatically adding GPU devices [ 4477.554] (==) Automatically binding GPU devices [ 4477.554] (==) Max clients allowed: 256, resource mask: 0x1fffff [ 4477.554] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. [ 4477.554] Entry deleted from font path. [ 4477.554] (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/100dpi/:unscaled, /usr/share/fonts/X11/75dpi/:unscaled, /usr/share/fonts/X11/Type1, /usr/share/fonts/X11/100dpi, /usr/share/fonts/X11/75dpi, built-ins [ 4477.554] (==) ModulePath set to "/usr/lib/xorg/modules" [ 4477.554] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 4477.554] (II) Loader magic: 0x562c64f66f00 [ 4477.554] (II) Module ABI versions: [ 4477.554] X.Org ANSI C Emulation: 0.4 [ 4477.554] X.Org Video Driver: 25.2 [ 4477.555] X.Org XInput driver : 24.4 [ 4477.555] X.Org Server Extension : 10.0 [ 4477.558] (++) using VT number 7 [ 4477.559] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration [ 4477.563] (II) xfree86: Adding drm device (/dev/dri/card0) [ 4477.563] (II) Platform probe for /sys/devices/pci0000:00/0000:00:02.0/drm/card0 [ 4477.590] (--) PCI:*(0@0:2:0) 8086:a011:1025:0349 rev 0, Mem @ 0x98180000/524288, 0x80000000/268435456, 0x98000000/1048576, I/O @ 0x000060c0/8, BIOS @ 0x????????/131072 [ 4477.591] (--) PCI: (0@0:2:1) 8086:a012:1025:0349 rev 0, Mem @ 0x98100000/524288 [ 4477.591] (II) LoadModule: "glx" [ 4477.592] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 4477.597] (II) Module glx: vendor="X.Org Foundation" [ 4477.597] compiled for 1.21.1.16, module version = 1.0.0 [ 4477.597] ABI class: X.Org Server Extension, version 10.0 [ 4477.597] (==) Matched intel as autoconfigured driver 0 [ 4477.597] (==) Matched modesetting as autoconfigured driver 1 [ 4477.597] (==) Matched fbdev as autoconfigured driver 2 [ 4477.597] (==) Matched vesa as autoconfigured driver 3 [ 4477.597] (==) Assigned the driver to the xf86ConfigLayout [ 4477.597] (II) LoadModule: "intel" [ 4477.598] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so [ 4477.599] (II) Module intel: vendor="X.Org Foundation" [ 4477.599] compiled for 1.21.1.3, module version = 2.99.917 [ 4477.599] Module class: X.Org Video Driver [ 4477.600] ABI class: X.Org Video Driver, version 25.2 [ 4477.600] (II) LoadModule: "modesetting" [ 4477.600] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so [ 4477.601] (II) Module modesetting: vendor="X.Org Foundation" [ 4477.601] compiled for 1.21.1.16, module version = 1.21.1 [ 4477.601] Module class: X.Org Video Driver [ 4477.601] ABI class: X.Org Video Driver, version 25.2 [ 4477.601] (II) LoadModule: "fbdev" [ 4477.601] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so [ 4477.602] (II) Module fbdev: vendor="X.Org Foundation" [ 4477.602] compiled for 1.21.1.3, module version = 0.5.0 [ 4477.602] Module class: X.Org Video Driver [ 4477.602] ABI class: X.Org Video Driver, version 25.2 [ 4477.602] (II) LoadModule: "vesa" [ 4477.603] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so [ 4477.603] (II) Module vesa: vendor="X.Org Foundation" [ 4477.603] compiled for 1.21.1.15, module version = 2.6.0 [ 4477.603] Module class: X.Org Video Driver [ 4477.603] ABI class: X.Org Video Driver, version 25.2 [ 4477.603] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, 4 Series, G45/G43, Q45/Q43, G41, B43 [ 4477.605] (II) intel: Driver for Intel(R) HD Graphics [ 4477.605] (II) intel: Driver for Intel(R) Iris(TM) Graphics [ 4477.605] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics [ 4477.605] (II) modesetting: Driver for Modesetting Kernel Drivers: kms [ 4477.605] (II) FBDEV: driver for framebuffer: fbdev [ 4477.605] (II) VESA: driver for VESA chipsets: vesa [ 4477.606] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 0 [ 4477.606] (II) intel(0): SNA compiled: xserver-xorg-video-intel 2:2.99.917+git20210115-1 (Timo Aaltonen <[email protected]>) [ 4477.606] (II) intel(0): SNA compiled for use with valgrind [ 4477.607] (WW) Falling back to old probe method for modesetting [ 4477.607] (WW) Falling back to old probe method for fbdev [ 4477.607] (II) Loading sub module "fbdevhw" [ 4477.607] (II) LoadModule: "fbdevhw" [ 4477.607] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so [ 4477.608] (II) Module fbdevhw: vendor="X.Org Foundation" [ 4477.608] compiled for 1.21.1.16, module version = 0.0.2 [ 4477.608] ABI class: X.Org Video Driver, version 25.2 [ 4477.610] (--) intel(0): Integrated Graphics Chipset: Intel(R) Pineview GM [ 4477.610] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3; using a maximum of 1 threads [ 4477.610] (II) intel(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [ 4477.610] (==) intel(0): Depth 24, (--) framebuffer bpp 32 [ 4477.610] (==) intel(0): RGB weight 888 [ 4477.610] (==) intel(0): Default visual is TrueColor [ 4477.612] (II) intel(0): Output LVDS1 has no monitor section [ 4477.613] (--) intel(0): Found backlight control interface acpi_video0 (type 'firmware') for output LVDS1 [ 4477.614] (II) intel(0): Enabled output LVDS1 [ 4477.614] (II) intel(0): Output VGA1 has no monitor section [ 4477.614] (II) intel(0): Enabled output VGA1 [ 4477.614] (--) intel(0): Using a maximum size of 256x256 for hardware cursors [ 4477.615] (II) intel(0): Output VIRTUAL1 has no monitor section [ 4477.615] (II) intel(0): Enabled output VIRTUAL1 [ 4477.615] (--) intel(0): Output LVDS1 using initial mode 1024x600 on pipe 1 [ 4477.615] (==) intel(0): TearFree disabled [ 4477.616] (==) intel(0): Using gamma correction (1.0, 1.0, 1.0) [ 4477.616] (==) intel(0): DPI set to (96, 96) [ 4477.616] (II) Loading sub module "dri3" [ 4477.616] (II) LoadModule: "dri3" [ 4477.616] (II) Module "dri3" already built-in [ 4477.616] (II) Loading sub module "dri2" [ 4477.616] (II) LoadModule: "dri2" [ 4477.616] (II) Module "dri2" already built-in [ 4477.616] (II) Loading sub module "present" [ 4477.616] (II) LoadModule: "present" [ 4477.616] (II) Module "present" already built-in [ 4477.616] (II) UnloadModule: "modesetting" [ 4477.616] (II) Unloading modesetting [ 4477.617] (II) UnloadModule: "fbdev" [ 4477.617] (II) Unloading fbdev [ 4477.617] (II) UnloadSubModule: "fbdevhw" [ 4477.617] (II) Unloading fbdevhw [ 4477.617] (II) UnloadModule: "vesa" [ 4477.617] (II) Unloading vesa [ 4477.618] (II) intel(0): SNA initialized with Alviso (gen3) backend [ 4477.618] (==) intel(0): Backing store enabled [ 4477.618] (==) intel(0): Silken mouse enabled [ 4477.618] (II) intel(0): HW Cursor enabled [ 4477.618] (==) intel(0): DPMS enabled [ 4477.619] (==) intel(0): Display hotplug detection enabled [ 4477.619] (II) intel(0): [XvMC] i915_xvmc driver initialized. [ 4477.619] (II) intel(0): [DRI2] Setup complete [ 4477.619] (II) intel(0): [DRI2] DRI driver: i915 [ 4477.619] (II) intel(0): [DRI2] VDPAU driver: va_gl [ 4477.619] (II) intel(0): direct rendering: DRI2 enabled [ 4477.619] (II) intel(0): hardware support for Present enabled [ 4477.619] (II) Initializing extension Generic Event Extension [ 4477.620] (II) Initializing extension SHAPE [ 4477.621] (II) Initializing extension MIT-SHM [ 4477.621] (II) Initializing extension XInputExtension [ 4477.622] (II) Initializing extension XTEST [ 4477.623] (II) Initializing extension BIG-REQUESTS [ 4477.623] (II) Initializing extension SYNC [ 4477.624] (II) Initializing extension XKEYBOARD [ 4477.625] (II) Initializing extension XC-MISC [ 4477.625] (II) Initializing extension SECURITY [ 4477.626] (II) Initializing extension XFIXES [ 4477.627] (II) Initializing extension RENDER [ 4477.627] (II) Initializing extension RANDR [ 4477.629] (II) Initializing extension COMPOSITE [ 4477.629] (II) Initializing extension DAMAGE [ 4477.630] (II) Initializing extension MIT-SCREEN-SAVER [ 4477.630] (II) Initializing extension DOUBLE-BUFFER [ 4477.631] (II) Initializing extension RECORD [ 4477.632] (II) Initializing extension DPMS [ 4477.632] (II) Initializing extension Present [ 4477.633] (II) Initializing extension DRI3 [ 4477.633] (II) Initializing extension X-Resource [ 4477.634] (II) Initializing extension XVideo [ 4477.634] (II) Initializing extension XVideo-MotionCompensation [ 4477.635] (II) Initializing extension SELinux [ 4477.635] (II) SELinux: Disabled on system [ 4477.635] (II) Initializing extension GLX [ 4477.851] (II) AIGLX: Loaded and initialized i915 [ 4477.851] (II) GLX: Initialized DRI2 GL provider for screen 0 [ 4477.852] (II) Initializing extension XFree86-VidModeExtension [ 4477.852] (II) Initializing extension XFree86-DGA [ 4477.853] (II) Initializing extension XFree86-DRI [ 4477.853] (II) Initializing extension DRI2 [ 4477.862] (II) intel(0): switch to mode [email protected] on LVDS1 using pipe 1, position (0, 0), rotation normal, reflection none [ 4477.876] (II) intel(0): Setting screen physical size to 270 x 158 [ 4478.164] (II) config/udev: Adding input device Power Button (/dev/input/event4) [ 4478.165] (**) Power Button: Applying InputClass "libinput keyboard catchall" [ 4478.165] (II) LoadModule: "libinput" [ 4478.166] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so [ 4478.175] (II) Module libinput: vendor="X.Org Foundation" [ 4478.175] compiled for 1.21.1.15, module version = 1.5.0 [ 4478.175] Module class: X.Org XInput Driver [ 4478.175] ABI class: X.Org XInput driver, version 24.4 [ 4478.175] (II) Using input driver 'libinput' for 'Power Button' [ 4478.175] (**) Power Button: always reports core events [ 4478.175] (**) Option "Device" "/dev/input/event4" [ 4478.191] (II) event4 - Power Button: is tagged by udev as: Keyboard [ 4478.191] (II) event4 - Power Button: device is a keyboard [ 4478.192] (II) event4 - Power Button: device removed [ 4478.224] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event4" [ 4478.224] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6) [ 4478.224] (**) Option "xkb_model" "pc105" [ 4478.224] (**) Option "xkb_layout" "gb" [ 4478.322] (II) event4 - Power Button: is tagged by udev as: Keyboard [ 4478.322] (II) event4 - Power Button: device is a keyboard [ 4478.327] (II) config/udev: Adding input device Video Bus (/dev/input/event6) [ 4478.327] (**) Video Bus: Applying InputClass "libinput keyboard catchall" [ 4478.327] (II) Using input driver 'libinput' for 'Video Bus' [ 4478.327] (**) Video Bus: always reports core events [ 4478.327] (**) Option "Device" "/dev/input/event6" [ 4478.334] (II) event6 - Video Bus: is tagged by udev as: Keyboard [ 4478.334] (II) event6 - Video Bus: device is a keyboard [ 4478.335] (II) event6 - Video Bus: device removed [ 4478.376] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7/event6" [ 4478.376] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7) [ 4478.376] (**) Option "xkb_model" "pc105" [ 4478.376] (**) Option "xkb_layout" "gb" [ 4478.383] (II) event6 - Video Bus: is tagged by udev as: Keyboard [ 4478.383] (II) event6 - Video Bus: device is a keyboard [ 4478.387] (II) config/udev: Adding input device Power Button (/dev/input/event1) [ 4478.387] (**) Power Button: Applying InputClass "libinput keyboard catchall" [ 4478.387] (II) Using input driver 'libinput' for 'Power Button' [ 4478.387] (**) Power Button: always reports core events [ 4478.387] (**) Option "Device" "/dev/input/event1" [ 4478.393] (II) event1 - Power Button: is tagged by udev as: Keyboard [ 4478.393] (II) event1 - Power Button: device is a keyboard [ 4478.394] (II) event1 - Power Button: device removed [ 4478.408] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2/event1" [ 4478.408] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8) [ 4478.408] (**) Option "xkb_model" "pc105" [ 4478.408] (**) Option "xkb_layout" "gb" [ 4478.414] (II) event1 - Power Button: is tagged by udev as: Keyboard [ 4478.414] (II) event1 - Power Button: device is a keyboard [ 4478.418] (II) config/udev: Adding input device Lid Switch (/dev/input/event3) [ 4478.419] (II) No input driver specified, ignoring this device. [ 4478.419] (II) This device may have been added with another device file. [ 4478.422] (II) config/udev: Adding input device Sleep Button (/dev/input/event2) [ 4478.422] (**) Sleep Button: Applying InputClass "libinput keyboard catchall" [ 4478.422] (II) Using input driver 'libinput' for 'Sleep Button' [ 4478.422] (**) Sleep Button: always reports core events [ 4478.422] (**) Option "Device" "/dev/input/event2" [ 4478.428] (II) event2 - Sleep Button: is tagged by udev as: Keyboard [ 4478.428] (II) event2 - Sleep Button: device is a keyboard [ 4478.429] (II) event2 - Sleep Button: device removed [ 4478.444] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3/event2" [ 4478.444] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9) [ 4478.444] (**) Option "xkb_model" "pc105" [ 4478.444] (**) Option "xkb_layout" "gb" [ 4478.450] (II) event2 - Sleep Button: is tagged by udev as: Keyboard [ 4478.450] (II) event2 - Sleep Button: device is a keyboard [ 4478.456] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event9) [ 4478.456] (II) No input driver specified, ignoring this device. [ 4478.456] (II) This device may have been added with another device file. [ 4478.458] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event10) [ 4478.458] (II) No input driver specified, ignoring this device. [ 4478.458] (II) This device may have been added with another device file. [ 4478.461] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event11) [ 4478.461] (II) No input driver specified, ignoring this device. [ 4478.461] (II) This device may have been added with another device file. [ 4478.465] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0) [ 4478.465] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall" [ 4478.465] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard' [ 4478.465] (**) AT Translated Set 2 keyboard: always reports core events [ 4478.465] (**) Option "Device" "/dev/input/event0" [ 4478.471] (II) event0 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard [ 4478.472] (II) event0 - AT Translated Set 2 keyboard: device is a keyboard [ 4478.475] (II) event0 - AT Translated Set 2 keyboard: device removed [ 4478.496] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0" [ 4478.496] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10) [ 4478.496] (**) Option "xkb_model" "pc105" [ 4478.496] (**) Option "xkb_layout" "gb" [ 4478.503] (II) event0 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard [ 4478.503] (II) event0 - AT Translated Set 2 keyboard: device is a keyboard [ 4478.510] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event5) [ 4478.511] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "libinput touchpad catchall" [ 4478.511] (II) Using input driver 'libinput' for 'SynPS/2 Synaptics TouchPad' [ 4478.511] (**) SynPS/2 Synaptics TouchPad: always reports core events [ 4478.511] (**) Option "Device" "/dev/input/event5" [ 4478.517] (II) event5 - SynPS/2 Synaptics TouchPad: is tagged by udev as: Touchpad [ 4478.526] (II) event5 - SynPS/2 Synaptics TouchPad: device is a touchpad [ 4478.527] (II) event5 - SynPS/2 Synaptics TouchPad: device removed [ 4478.564] (II) libinput: SynPS/2 Synaptics TouchPad: Step value 0 was provided, libinput Fallback acceleration function is used. [ 4478.564] (II) libinput: SynPS/2 Synaptics TouchPad: Step value 0 was provided, libinput Fallback acceleration function is used. [ 4478.564] (II) libinput: SynPS/2 Synaptics TouchPad: Step value 0 was provided, libinput Fallback acceleration function is used. [ 4478.567] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input6/event5" [ 4478.567] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 11) [ 4478.573] (**) Option "AccelerationScheme" "none" [ 4478.573] (**) SynPS/2 Synaptics TouchPad: (accel) selected scheme none/0 [ 4478.573] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000 [ 4478.573] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4 [ 4478.579] (II) event5 - SynPS/2 Synaptics TouchPad: is tagged by udev as: Touchpad [ 4478.588] (II) event5 - SynPS/2 Synaptics TouchPad: device is a touchpad [ 4478.593] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0) [ 4478.593] (II) No input driver specified, ignoring this device. [ 4478.593] (II) This device may have been added with another device file. [ 4478.598] (II) config/udev: Adding input device PC Speaker (/dev/input/event7) [ 4478.598] (II) No input driver specified, ignoring this device. [ 4478.598] (II) This device may have been added with another device file. [ 4478.603] (II) config/udev: Adding input device Acer WMI hotkeys (/dev/input/event8) [ 4478.603] (**) Acer WMI hotkeys: Applying InputClass "libinput keyboard catchall" [ 4478.603] (II) Using input driver 'libinput' for 'Acer WMI hotkeys' [ 4478.603] (**) Acer WMI hotkeys: always reports core events [ 4478.603] (**) Option "Device" "/dev/input/event8" [ 4478.607] (II) event8 - Acer WMI hotkeys: is tagged by udev as: Keyboard [ 4478.608] (II) event8 - Acer WMI hotkeys: device is a keyboard [ 4478.611] (II) event8 - Acer WMI hotkeys: device removed [ 4478.636] (**) Option "config_info" "udev:/sys/devices/virtual/input/input9/event8" [ 4478.636] (II) XINPUT: Adding extended input device "Acer WMI hotkeys" (type: KEYBOARD, id 12) [ 4478.636] (**) Option "xkb_model" "pc105" [ 4478.636] (**) Option "xkb_layout" "gb" [ 4478.641] (II) event8 - Acer WMI hotkeys: is tagged by udev as: Keyboard [ 4478.641] (II) event8 - Acer WMI hotkeys: device is a keyboard [ 4479.619] (II) intel(0): EDID vendor "AUO", prod id 25042 [ 4479.619] (II) intel(0): Printing DDC gathered Modelines: [ 4479.619] (II) intel(0): Modeline "1024x600"x0.0 49.80 1024 1072 1104 1338 600 602 608 620 -hsync -vsync (37.2 kHz eP) [ 4480.307] (II) event4 - Power Button: device removed [ 4480.335] (II) event6 - Video Bus: device removed [ 4480.360] (II) event1 - Power Button: device removed [ 4480.380] (II) event2 - Sleep Button: device removed [ 4480.401] (II) event0 - AT Translated Set 2 keyboard: device removed [ 4480.420] (II) event5 - SynPS/2 Synaptics TouchPad: device removed [ 4480.459] (II) event8 - Acer WMI hotkeys: device removed [ 4480.476] (II) AIGLX: Suspending AIGLX clients for VT switch [ 4555.765] (II) AIGLX: Resuming AIGLX clients after VT switch [ 4555.765] (II) intel(0): switch to mode [email protected] on LVDS1 using pipe 1, position (0, 0), rotation normal, reflection none [ 4555.846] (II) event4 - Power Button: is tagged by udev as: Keyboard [ 4555.847] (II) event4 - Power Button: device is a keyboard [ 4555.857] (II) event6 - Video Bus: is tagged by udev as: Keyboard [ 4555.858] (II) event6 - Video Bus: device is a keyboard [ 4555.869] (II) event1 - Power Button: is tagged by udev as: Keyboard [ 4555.870] (II) event1 - Power Button: device is a keyboard [ 4555.879] (II) event2 - Sleep Button: is tagged by udev as: Keyboard [ 4555.879] (II) event2 - Sleep Button: device is a keyboard [ 4555.890] (II) event0 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard [ 4555.890] (II) event0 - AT Translated Set 2 keyboard: device is a keyboard [ 4555.905] (II) event5 - SynPS/2 Synaptics TouchPad: is tagged by udev as: Touchpad [ 4555.918] (II) event5 - SynPS/2 Synaptics TouchPad: device is a touchpad [ 4555.926] (II) event8 - Acer WMI hotkeys: is tagged by udev as: Keyboard [ 4555.927] (II) event8 - Acer WMI hotkeys: device is a keyboard [ 4577.452] (II) Axis 0 value 1239 is outside expected range [1264, 5819] See https://wayland.freedesktop.org/libinput/doc/1.28.1/absolute_coordinate_ranges.html for details udev information: ----------------- P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5 M: input5 R: 5 J: +input:input5 U: input E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5 E: SUBSYSTEM=input E: PRODUCT=19/0/1/0 E: NAME="Power Button" E: PHYS="LNXPWRBN/button/input0" E: PROP=0 E: EV=3 E: KEY=8000 10000000000000 0 E: MODALIAS=input:b0019v0000p0001e0000-e0,1,k74,8F,ramlsfw E: USEC_INITIALIZED=5503338 E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_PATH=acpi-LNXPWRBN:00 E: ID_PATH_TAG=acpi-LNXPWRBN_00 E: ID_FOR_SEAT=input-acpi-LNXPWRBN_00 E: TAGS=:seat: E: CURRENT_TAGS=:seat: P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event4 M: event4 R: 4 J: c13:68 U: input D: c 13:68 N: input/event4 L: 0 E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event4 E: SUBSYSTEM=input E: DEVNAME=/dev/input/event4 E: MAJOR=13 E: MINOR=68 E: USEC_INITIALIZED=20233525 E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_PATH=acpi-LNXPWRBN:00 E: ID_PATH_TAG=acpi-LNXPWRBN_00 E: XKBMODEL=pc105 E: XKBLAYOUT=gb E: BACKSPACE=guess E: LIBINPUT_DEVICE_GROUP=19/0/1:LNXPWRBN/button E: TAGS=:power-switch: E: CURRENT_TAGS=:power-switch: P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7 M: input7 R: 7 J: +input:input7 U: input E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7 E: SUBSYSTEM=input E: PRODUCT=19/0/6/0 E: NAME="Video Bus" E: PHYS="LNXVIDEO/video/input0" E: PROP=0 E: EV=3 E: KEY=3e000b00000000 0 0 0 E: MODALIAS=input:b0019v0000p0006e0000-e0,1,kE0,E1,E3,F1,F2,F3,F4,F5,ramlsfw E: USEC_INITIALIZED=11217865 E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_PATH=acpi-LNXVIDEO:00 E: ID_PATH_TAG=acpi-LNXVIDEO_00 E: ID_FOR_SEAT=input-acpi-LNXVIDEO_00 E: TAGS=:seat: E: CURRENT_TAGS=:seat: P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7/event6 M: event6 R: 6 J: c13:70 U: input D: c 13:70 N: input/event6 L: 0 E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7/event6 E: SUBSYSTEM=input E: DEVNAME=/dev/input/event6 E: MAJOR=13 E: MINOR=70 E: USEC_INITIALIZED=20234184 E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_PATH=acpi-LNXVIDEO:00 E: ID_PATH_TAG=acpi-LNXVIDEO_00 E: XKBMODEL=pc105 E: XKBLAYOUT=gb E: BACKSPACE=guess E: LIBINPUT_DEVICE_GROUP=19/0/6:LNXVIDEO/video E: TAGS=:power-switch: E: CURRENT_TAGS=:power-switch: P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 M: input2 R: 2 J: +input:input2 U: input E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 E: SUBSYSTEM=input E: PRODUCT=19/0/1/0 E: NAME="Power Button" E: PHYS="PNP0C0C/button/input0" E: PROP=0 E: EV=3 E: KEY=8000 10000000000000 0 E: MODALIAS=input:b0019v0000p0001e0000-e0,1,k74,8F,ramlsfw E: USEC_INITIALIZED=5482936 E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_PATH=acpi-PNP0C0C:00 E: ID_PATH_TAG=acpi-PNP0C0C_00 E: ID_FOR_SEAT=input-acpi-PNP0C0C_00 E: TAGS=:seat: E: CURRENT_TAGS=:seat: P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2/event1 M: event1 R: 1 J: c13:65 U: input D: c 13:65 N: input/event1 L: 0 E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2/event1 E: SUBSYSTEM=input E: DEVNAME=/dev/input/event1 E: MAJOR=13 E: MINOR=65 E: USEC_INITIALIZED=20232571 E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_PATH=acpi-PNP0C0C:00 E: ID_PATH_TAG=acpi-PNP0C0C_00 E: XKBMODEL=pc105 E: XKBLAYOUT=gb E: BACKSPACE=guess E: LIBINPUT_DEVICE_GROUP=19/0/1:PNP0C0C/button E: TAGS=:power-switch: E: CURRENT_TAGS=:power-switch: P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input4 M: input4 R: 4 J: +input:input4 U: input E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input4 E: SUBSYSTEM=input E: PRODUCT=19/0/5/0 E: NAME="Lid Switch" E: PHYS="PNP0C0D/button/input0" E: PROP=0 E: EV=21 E: SW=1 E: MODALIAS=input:b0019v0000p0005e0000-e0,5,kramlsfw0, E: USEC_INITIALIZED=5502307 E: ID_INPUT=1 E: ID_INPUT_SWITCH=1 E: ID_PATH=acpi-PNP0C0D:00 E: ID_PATH_TAG=acpi-PNP0C0D_00 E: ID_FOR_SEAT=input-acpi-PNP0C0D_00 E: TAGS=:seat: E: CURRENT_TAGS=:seat: P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input4/event3 M: event3 R: 3 J: c13:67 U: input D: c 13:67 N: input/event3 L: 0 E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input4/event3 E: SUBSYSTEM=input E: DEVNAME=/dev/input/event3 E: MAJOR=13 E: MINOR=67 E: USEC_INITIALIZED=20233191 E: ID_INPUT=1 E: ID_INPUT_SWITCH=1 E: ID_PATH=acpi-PNP0C0D:00 E: ID_PATH_TAG=acpi-PNP0C0D_00 E: LIBINPUT_DEVICE_GROUP=19/0/5:PNP0C0D/button E: TAGS=:power-switch: E: CURRENT_TAGS=:power-switch: P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3 M: input3 R: 3 J: +input:input3 U: input E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3 E: SUBSYSTEM=input E: PRODUCT=19/0/3/0 E: NAME="Sleep Button" E: PHYS="PNP0C0E/button/input0" E: PROP=0 E: EV=3 E: KEY=4000 0 0 E: MODALIAS=input:b0019v0000p0003e0000-e0,1,k8E,ramlsfw E: USEC_INITIALIZED=5483725 E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_PATH=acpi-PNP0C0E:00 E: ID_PATH_TAG=acpi-PNP0C0E_00 E: ID_FOR_SEAT=input-acpi-PNP0C0E_00 E: TAGS=:seat: E: CURRENT_TAGS=:seat: P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3/event2 M: event2 R: 2 J: c13:66 U: input D: c 13:66 N: input/event2 L: 0 E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3/event2 E: SUBSYSTEM=input E: DEVNAME=/dev/input/event2 E: MAJOR=13 E: MINOR=66 E: USEC_INITIALIZED=20232870 E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_PATH=acpi-PNP0C0E:00 E: ID_PATH_TAG=acpi-PNP0C0E_00 E: XKBMODEL=pc105 E: XKBLAYOUT=gb E: BACKSPACE=guess E: LIBINPUT_DEVICE_GROUP=19/0/3:PNP0C0E/button E: TAGS=:power-switch: E: CURRENT_TAGS=:power-switch: P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 M: input10 R: 10 J: +input:input10 U: input E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input10 E: SUBSYSTEM=input E: PRODUCT=1/10ec/272/1 E: NAME="HDA Digital PCBeep" E: PHYS="card0/codec#0/beep0" E: PROP=0 E: EV=40001 E: SND=6 E: MODALIAS=input:b0001v10ECp0272e0001-e0,12,kramls1,2,fw E: USEC_INITIALIZED=31114922 E: ID_INPUT=1 E: ID_PATH=pci-0000:00:1b.0 E: ID_PATH_TAG=pci-0000_00_1b_0 E: ID_FOR_SEAT=input-pci-0000_00_1b_0 E: TAGS=:seat: E: CURRENT_TAGS=:seat: P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input10/event9 M: event9 R: 9 J: c13:73 U: input D: c 13:73 N: input/event9 L: 0 E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input10/event9 E: SUBSYSTEM=input E: DEVNAME=/dev/input/event9 E: MAJOR=13 E: MINOR=73 E: USEC_INITIALIZED=31115184 E: ID_INPUT=1 E: ID_PATH=pci-0000:00:1b.0 E: ID_PATH_TAG=pci-0000_00_1b_0 E: LIBINPUT_DEVICE_GROUP=1/10ec/272:card0/codec#0/beep0 P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 M: input11 R: 11 J: +input:input11 U: input E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input11 E: SUBSYSTEM=input E: PRODUCT=0/0/0/0 E: NAME="HDA Intel Mic" E: PHYS="ALSA" E: PROP=0 E: EV=21 E: SW=10 E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw4, E: USEC_INITIALIZED=31115488 E: ID_INPUT=1 E: ID_INPUT_SWITCH=1 E: ID_PATH=pci-0000:00:1b.0 E: ID_PATH_TAG=pci-0000_00_1b_0 E: ID_FOR_SEAT=input-pci-0000_00_1b_0 E: TAGS=:seat: E: CURRENT_TAGS=:seat: P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input11/event10 M: event10 R: 10 J: c13:74 U: input D: c 13:74 N: input/event10 L: 0 E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input11/event10 E: SUBSYSTEM=input E: DEVNAME=/dev/input/event10 E: MAJOR=13 E: MINOR=74 E: USEC_INITIALIZED=31115848 E: ID_INPUT=1 E: ID_INPUT_SWITCH=1 E: ID_PATH=pci-0000:00:1b.0 E: ID_PATH_TAG=pci-0000_00_1b_0 E: LIBINPUT_DEVICE_GROUP=0/0/0:ALSA E: TAGS=:power-switch: E: CURRENT_TAGS=:power-switch: P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 M: input12 R: 12 J: +input:input12 U: input E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input12 E: SUBSYSTEM=input E: PRODUCT=0/0/0/0 E: NAME="HDA Intel Headphone" E: PHYS="ALSA" E: PROP=0 E: EV=21 E: SW=4 E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw2, E: USEC_INITIALIZED=31140282 E: ID_INPUT=1 E: ID_INPUT_SWITCH=1 E: ID_PATH=pci-0000:00:1b.0 E: ID_PATH_TAG=pci-0000_00_1b_0 E: ID_FOR_SEAT=input-pci-0000_00_1b_0 E: TAGS=:seat: E: CURRENT_TAGS=:seat: P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input12/event11 M: event11 R: 11 J: c13:75 U: input D: c 13:75 N: input/event11 L: 0 E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input12/event11 E: SUBSYSTEM=input E: DEVNAME=/dev/input/event11 E: MAJOR=13 E: MINOR=75 E: USEC_INITIALIZED=31140670 E: ID_INPUT=1 E: ID_INPUT_SWITCH=1 E: ID_PATH=pci-0000:00:1b.0 E: ID_PATH_TAG=pci-0000_00_1b_0 E: LIBINPUT_DEVICE_GROUP=0/0/0:ALSA E: TAGS=:power-switch: E: CURRENT_TAGS=:power-switch: P: /devices/platform/i8042/serio0/input/input0 M: input0 R: 0 J: +input:input0 U: input E: DEVPATH=/devices/platform/i8042/serio0/input/input0 E: SUBSYSTEM=input E: PRODUCT=11/1/1/ab83 E: NAME="AT Translated Set 2 keyboard" E: PHYS="isa0060/serio0/input0" E: PROP=0 E: EV=120013 E: KEY=402000002 3803078f800d001 feffffdfffefffff fffffffffffffffe E: MSC=10 E: LED=7 E: MODALIAS=input:b0011v0001p0001eAB83-e0,1,4,11,14,k71,72,73,74,75,76,77,79,7A,7B,7C,7D,7E,7F,80,8C,8E,8F,9B,9C,9D,9E,9F,A3,A4,A5,A6,AC,AD,B7,B8,B9,C1,D9,E2,ram4,l0,1,2,sfw E: USEC_INITIALIZED=5315707 E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_INPUT_KEYBOARD=1 E: ID_BUS=i8042 E: ID_SERIAL=noserial E: ID_PATH=platform-i8042-serio-0 E: ID_PATH_TAG=platform-i8042-serio-0 E: ID_FOR_SEAT=input-platform-i8042-serio-0 E: TAGS=:seat: E: CURRENT_TAGS=:seat: P: /devices/platform/i8042/serio0/input/input0/event0 M: event0 R: 0 J: c13:64 U: input D: c 13:64 N: input/event0 L: 0 S: input/by-path/platform-i8042-serio-0-event-kbd E: DEVPATH=/devices/platform/i8042/serio0/input/input0/event0 E: SUBSYSTEM=input E: DEVNAME=/dev/input/event0 E: MAJOR=13 E: MINOR=64 E: USEC_INITIALIZED=20232146 E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_INPUT_KEYBOARD=1 E: ID_BUS=i8042 E: ID_SERIAL=noserial E: ID_PATH=platform-i8042-serio-0 E: ID_PATH_TAG=platform-i8042-serio-0 E: XKBMODEL=pc105 E: XKBLAYOUT=gb E: BACKSPACE=guess E: LIBINPUT_DEVICE_GROUP=11/1/1:isa0060/serio0 E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-0-event-kbd E: TAGS=:power-switch: E: CURRENT_TAGS=:power-switch: P: /devices/platform/i8042/serio1/input/input6 M: input6 R: 6 J: +input:input6 U: input E: DEVPATH=/devices/platform/i8042/serio1/input/input6 E: SUBSYSTEM=input E: PRODUCT=11/2/7/1b1 E: NAME="SynPS/2 Synaptics TouchPad" E: PHYS="isa0060/serio1/input0" E: PROP=9 E: EV=b E: KEY=6420 30000 0 0 0 0 E: ABS=260800011000003 E: MODALIAS=input:b0011v0002p0007e01B1-e0,1,3,k110,111,145,14A,14D,14E,ra0,1,18,1C,2F,35,36,39,mlsfw E: USEC_INITIALIZED=8009722 E: ID_INPUT=1 E: ID_INPUT_TOUCHPAD=1 E: ID_BUS=i8042 E: ID_SERIAL=noserial E: ID_PATH=platform-i8042-serio-1 E: ID_PATH_TAG=platform-i8042-serio-1 E: ID_FOR_SEAT=input-platform-i8042-serio-1 E: TAGS=:seat: E: CURRENT_TAGS=:seat: P: /devices/platform/i8042/serio1/input/input6/event5 M: event5 R: 5 J: c13:69 U: input D: c 13:69 N: input/event5 L: 0 S: input/by-path/platform-i8042-serio-1-event-mouse E: DEVPATH=/devices/platform/i8042/serio1/input/input6/event5 E: SUBSYSTEM=input E: DEVNAME=/dev/input/event5 E: MAJOR=13 E: MINOR=69 E: USEC_INITIALIZED=20233845 E: ID_INPUT=1 E: ID_INPUT_TOUCHPAD=1 E: ID_INPUT_WIDTH_MM=66 E: ID_INPUT_HEIGHT_MM=25 E: ID_BUS=i8042 E: ID_SERIAL=noserial E: ID_PATH=platform-i8042-serio-1 E: ID_PATH_TAG=platform-i8042-serio-1 E: ID_INPUT_TOUCHPAD_INTEGRATION=internal E: LIBINPUT_DEVICE_GROUP=11/2/7:isa0060/serio1 E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-1-event-mouse P: /devices/platform/i8042/serio1/input/input6/mouse0 M: mouse0 R: 0 J: c13:32 U: input D: c 13:32 N: input/mouse0 L: 0 S: input/by-path/platform-i8042-serio-1-mouse E: DEVPATH=/devices/platform/i8042/serio1/input/input6/mouse0 E: SUBSYSTEM=input E: DEVNAME=/dev/input/mouse0 E: MAJOR=13 E: MINOR=32 E: USEC_INITIALIZED=19710255 E: ID_INPUT=1 E: ID_INPUT_TOUCHPAD=1 E: ID_BUS=i8042 E: ID_SERIAL=noserial E: ID_PATH=platform-i8042-serio-1 E: ID_PATH_TAG=platform-i8042-serio-1 E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-1-mouse P: /devices/platform/pcspkr/input/input8 M: input8 R: 8 J: +input:input8 U: input E: DEVPATH=/devices/platform/pcspkr/input/input8 E: SUBSYSTEM=input E: PRODUCT=10/1f/1/100 E: NAME="PC Speaker" E: PHYS="isa0061/input0" E: PROP=0 E: EV=40001 E: SND=6 E: MODALIAS=input:b0010v001Fp0001e0100-e0,12,kramls1,2,fw E: USEC_INITIALIZED=23932985 E: ID_INPUT=1 E: ID_SERIAL=noserial E: ID_PATH=platform-pcspkr E: ID_PATH_TAG=platform-pcspkr E: ID_FOR_SEAT=input-platform-pcspkr E: TAGS=:seat: E: CURRENT_TAGS=:seat: P: /devices/platform/pcspkr/input/input8/event7 M: event7 R: 7 J: c13:71 U: input D: c 13:71 N: input/event7 L: 0 S: input/by-path/platform-pcspkr-event-spkr E: DEVPATH=/devices/platform/pcspkr/input/input8/event7 E: SUBSYSTEM=input E: DEVNAME=/dev/input/event7 E: MAJOR=13 E: MINOR=71 E: USEC_INITIALIZED=23988521 E: ID_INPUT=1 E: ID_SERIAL=noserial E: ID_PATH=platform-pcspkr E: ID_PATH_TAG=platform-pcspkr E: LIBINPUT_DEVICE_GROUP=10/1f/1:isa0061 E: DEVLINKS=/dev/input/by-path/platform-pcspkr-event-spkr P: /devices/virtual/input/input9 M: input9 R: 9 J: +input:input9 U: input E: DEVPATH=/devices/virtual/input/input9 E: SUBSYSTEM=input E: PRODUCT=19/0/0/0 E: NAME="Acer WMI hotkeys" E: PHYS="wmi/input0" E: PROP=0 E: EV=13 E: KEY=1c0000 0 0 0 0 1600800000c00 300400 10000000000000 0 E: MSC=10 E: MODALIAS=input:b0019v0000p0000e0000-e0,1,4,k74,8A,94,95,CA,CB,E3,ED,EE,F0,212,213,214,ram4,lsfw E: USEC_INITIALIZED=24295946 E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: TAGS=:seat: E: CURRENT_TAGS=:seat: P: /devices/virtual/input/input9/event8 M: event8 R: 8 J: c13:72 U: input D: c 13:72 N: input/event8 L: 0 E: DEVPATH=/devices/virtual/input/input9/event8 E: SUBSYSTEM=input E: DEVNAME=/dev/input/event8 E: MAJOR=13 E: MINOR=72 E: USEC_INITIALIZED=24296284 E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: XKBMODEL=pc105 E: XKBLAYOUT=gb E: BACKSPACE=guess E: LIBINPUT_DEVICE_GROUP=19/0/0:wmi E: TAGS=:power-switch: E: CURRENT_TAGS=:power-switch: DRM Information from dmesg: --------------------------- -- System Information: Debian Release: 13.1 APT prefers stable-updates APT policy: (500, 'stable-updates'), (500, 'stable-security'), (500, 'stable-debug'), (500, 'stable') Architecture: amd64 (x86_64) Foreign Architectures: i386 Kernel: Linux 6.12.43+deb13-amd64 (SMP w/2 CPU threads; PREEMPT) Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8), LANGUAGE=en_GB:en Shell: /bin/sh linked to /usr/bin/dash Init: systemd (via /run/systemd/system) LSM: AppArmor: enabled Versions of packages xserver-xorg-core depends on: ii keyboard-configuration 1.240 ii libaudit1 1:4.0.2-2+b2 ii libc6 2.41-12 ii libdbus-1-3 1.16.2-2 ii libdrm2 2.4.124-2 ii libegl1 1.7.0-1+b2 ii libepoxy0 1.5.10-2 ii libgbm1 25.0.7-2 ii libgl1 1.7.0-1+b2 ii libnettle8t64 3.10.1-1 ii libpciaccess0 0.17-3+b3 ii libpixman-1-0 0.44.0-3 ii libselinux1 3.8.1-1 ii libsystemd0 257.8-1~deb13u1 ii libudev1 257.8-1~deb13u1 ii libunwind8 1.8.1-0.1 ii libxau6 1:1.0.11-1 ii libxcvt0 0.1.3-1 ii libxdmcp6 1:1.1.5-1 ii libxfont2 1:2.0.6-1+b3 ii libxshmfence1 1.3.3-1 ii udev 257.8-1~deb13u1 ii xserver-common 2:21.1.16-1.3 Versions of packages xserver-xorg-core recommends: ii libgl1-mesa-dri 25.0.7-2 ii libpam-systemd [logind] 257.8-1~deb13u1 ii xcvt 0.1.3-1 Versions of packages xserver-xorg-core suggests: ii xfonts-100dpi 1:1.0.5 ii xfonts-75dpi 1:1.0.5 ii xfonts-scalable 1:1.0.3-1.3 -- no debconf information
