Package: xserver-xorg-video-intel Version: 2:2.12.0+shadow-2 Severity: grave File: i915 Justification: renders package unusable
i915 corrupts screen randomly by filling the dmesg log with the following error [ 2025.202526] [drm:i915_gem_object_bind_to_gtt] *ERROR* GTT full, but LRU list empty [ 2025.202529] [drm:i915_gem_object_pin] *ERROR* Failure to bind: -12 [ 2025.202532] [drm:i915_gem_execbuffer] *ERROR* Failed to pin buffers -12 Restarting gdm does not recover the system. Reboot recovers the system but the error appears again. -- Package-specific info: /var/lib/x11/X.roster does not exist. /var/lib/x11/X.md5sum does not exist. X server symlink status: lrwxrwxrwx 1 root root 13 Sep 21 2009 /etc/X11/X -> /usr/bin/Xorg -rwxr-xr-x 1 root root 1733468 Oct 10 14:03 /usr/bin/Xorg /var/lib/x11/xorg.conf.roster does not exist. VGA-compatible devices on PCI bus: 00:02.0 VGA compatible controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 04) /etc/X11/xorg.conf does not exist. Kernel version (/proc/version): Linux version 2.6.30-1-686 (Debian 2.6.30-6) ([email protected]) (gcc version 4.3.4 (Debian 4.3.4-1) ) #1 SMP Sat Aug 15 19:11:58 UTC 2009 Xorg X server log files on system: -rw-r--r-- 1 root root 30835 Oct 24 15:07 /var/log/Xorg.0.log Contents of most recent Xorg X server log file /var/log/Xorg.0.log: X.Org X Server 1.7.7 Release Date: 2010-05-04 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.32.23-dsa-ia32 i686 Debian Current Operating System: Linux hydra 2.6.30-1-686 #1 SMP Sat Aug 15 19:11:58 UTC 2009 i686 Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.30-1-686 root=UUID=b4578ec5-93a7-43ab-9ec6-1ce8c86b90ed ro quiet Build Date: 10 October 2010 11:57:07AM xorg-server 2:1.7.7-8 (Cyril Brulebois <[email protected]>) Current version of pixman: 0.16.4 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Sun Oct 24 14:34:11 2010 (==) Using system config directory "/usr/share/X11/xorg.conf.d" (==) No Layout section. Using the first Screen section. (==) No screen section available. Using defaults. (**) |-->Screen "Default Screen Section" (0) (**) | |-->Monitor "<default monitor>" (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. (==) Automatically adding devices (==) Automatically enabling devices (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. Entry deleted from font path. (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/100dpi/:unscaled, /usr/share/fonts/X11/75dpi/:unscaled, /usr/share/fonts/X11/Type1, /usr/share/fonts/X11/100dpi, /usr/share/fonts/X11/75dpi, /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType, built-ins (==) ModulePath set to "/usr/lib/xorg/modules" (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. (II) Loader magic: 0x81ecca0 (II) Module ABI versions: X.Org ANSI C Emulation: 0.4 X.Org Video Driver: 6.0 X.Org XInput driver : 7.0 X.Org Server Extension : 2.0 (++) using VT number 7 (--) PCI:*(0:0:2:0) 8086:2592:17ff:058c Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller rev 4, Mem @ 0xb0080000/524288, 0xc0000000/268435456, 0xb0040000/262144, I/O @ 0x00001800/8 (--) PCI: (0:0:2:1) 8086:2792:17ff:058c Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller rev 4, Mem @ 0x8c000000/524288 (II) Open ACPI successful (/var/run/acpid.socket) (II) LoadModule: "extmod" (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so (II) Module extmod: vendor="X.Org Foundation" compiled for 1.7.7, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension SELinux (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-DGA (II) Loading extension DPMS (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "dbe" (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so (II) Module dbe: vendor="X.Org Foundation" compiled for 1.7.7, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "glx" (II) Loading /usr/lib/xorg/modules/extensions/libglx.so (II) Module glx: vendor="X.Org Foundation" compiled for 1.7.7, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (==) AIGLX enabled (II) Loading extension GLX (II) LoadModule: "record" (II) Loading /usr/lib/xorg/modules/extensions/librecord.so (II) Module record: vendor="X.Org Foundation" compiled for 1.7.7, module version = 1.13.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension RECORD (II) LoadModule: "dri" (II) Loading /usr/lib/xorg/modules/extensions/libdri.so (II) Module dri: vendor="X.Org Foundation" compiled for 1.7.7, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension XFree86-DRI (II) LoadModule: "dri2" (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so (II) Module dri2: vendor="X.Org Foundation" compiled for 1.7.7, module version = 1.1.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DRI2 (==) Matched intel as autoconfigured driver 0 (==) Matched vesa as autoconfigured driver 1 (==) Matched fbdev as autoconfigured driver 2 (==) Assigned the driver to the xf86ConfigLayout (II) LoadModule: "intel" (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so (II) Module intel: vendor="X.Org Foundation" compiled for 1.7.7, module version = 2.12.0 Module class: X.Org Video Driver ABI class: X.Org Video Driver, version 6.0 (II) LoadModule: "vesa" (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so (II) Module vesa: vendor="X.Org Foundation" compiled for 1.7.7, module version = 2.3.0 Module class: X.Org Video Driver ABI class: X.Org Video Driver, version 6.0 (II) LoadModule: "fbdev" (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so (II) Module fbdev: vendor="X.Org Foundation" compiled for 1.7.6.901, module version = 0.4.2 ABI class: X.Org Video Driver, version 6.0 (II) intel: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale, Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge (II) VESA: driver for VESA chipsets: vesa (II) FBDEV: driver for framebuffer: fbdev (II) Primary Device is: PCI 0...@00:02:0 (WW) Falling back to old probe method for vesa (WW) Falling back to old probe method for fbdev (II) Loading sub module "fbdevhw" (II) LoadModule: "fbdevhw" (II) Loading /usr/lib/xorg/modules/linux/libfbdevhw.so (II) Module fbdevhw: vendor="X.Org Foundation" compiled for 1.7.7, module version = 0.0.2 ABI class: X.Org Video Driver, version 6.0 (EE) open /dev/fb0: No such file or directory (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 8, (OK) drmOpenByBusid: Searching for BusID pci:0000:00:02.0 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 8, (OK) drmOpenByBusid: drmOpenMinor returns 8 drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0 (II) intel(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 (==) intel(0): Depth 24, (--) framebuffer bpp 32 (==) intel(0): RGB weight 888 (==) intel(0): Default visual is TrueColor (II) intel(0): Integrated Graphics Chipset: Intel(R) 915GM (--) intel(0): Chipset: "915GM" (==) intel(0): video overlay key set to 0x101fe (II) intel(0): Output VGA1 has no monitor section (II) intel(0): Output LVDS1 has no monitor section (II) intel(0): Output TV1 has no monitor section (II) intel(0): EDID for output VGA1 (II) intel(0): Not using default mode "640x350" (vrefresh out of range) (II) intel(0): Not using default mode "320x175" (doublescan mode not supported) (II) intel(0): Not using default mode "640x400" (vrefresh out of range) (II) intel(0): Not using default mode "320x200" (doublescan mode not supported) (II) intel(0): Not using default mode "720x400" (vrefresh out of range) (II) intel(0): Not using default mode "360x200" (doublescan mode not supported) (II) intel(0): Not using default mode "320x240" (doublescan mode not supported) (II) intel(0): Not using default mode "640x480" (vrefresh out of range) (II) intel(0): Not using default mode "320x240" (doublescan mode not supported) (II) intel(0): Not using default mode "640x480" (vrefresh out of range) (II) intel(0): Not using default mode "320x240" (doublescan mode not supported) (II) intel(0): Not using default mode "640x480" (vrefresh out of range) (II) intel(0): Not using default mode "320x240" (doublescan mode not supported) (II) intel(0): Not using default mode "800x600" (vrefresh out of range) (II) intel(0): Not using default mode "400x300" (doublescan mode not supported) (II) intel(0): Not using default mode "400x300" (doublescan mode not supported) (II) intel(0): Not using default mode "800x600" (vrefresh out of range) (II) intel(0): Not using default mode "400x300" (doublescan mode not supported) (II) intel(0): Not using default mode "800x600" (vrefresh out of range) (II) intel(0): Not using default mode "400x300" (doublescan mode not supported) (II) intel(0): Not using default mode "800x600" (vrefresh out of range) (II) intel(0): Not using default mode "400x300" (doublescan mode not supported) (II) intel(0): Not using default mode "1024x768" (interlace mode not supported) (II) intel(0): Not using default mode "512x384" (doublescan mode not supported) (II) intel(0): Not using default mode "512x384" (doublescan mode not supported) (II) intel(0): Not using default mode "1024x768" (vrefresh out of range) (II) intel(0): Not using default mode "512x384" (doublescan mode not supported) (II) intel(0): Not using default mode "1024x768" (vrefresh out of range) (II) intel(0): Not using default mode "512x384" (doublescan mode not supported) (II) intel(0): Not using default mode "1024x768" (vrefresh out of range) (II) intel(0): Not using default mode "512x384" (doublescan mode not supported) (II) intel(0): Not using default mode "1152x864" (vrefresh out of range) (II) intel(0): Not using default mode "576x432" (doublescan mode not supported) (II) intel(0): Not using default mode "1280x960" (hsync out of range) (II) intel(0): Not using default mode "640x480" (doublescan mode not supported) (II) intel(0): Not using default mode "1280x960" (vrefresh out of range) (II) intel(0): Not using default mode "640x480" (doublescan mode not supported) (II) intel(0): Not using default mode "1280x1024" (hsync out of range) (II) intel(0): Not using default mode "640x512" (doublescan mode not supported) (II) intel(0): Not using default mode "1280x1024" (vrefresh out of range) (II) intel(0): Not using default mode "640x512" (doublescan mode not supported) (II) intel(0): Not using default mode "1280x1024" (vrefresh out of range) (II) intel(0): Not using default mode "640x512" (doublescan mode not supported) (II) intel(0): Not using default mode "1600x1200" (hsync out of range) (II) intel(0): Not using default mode "800x600" (doublescan mode not supported) (II) intel(0): Not using default mode "1600x1200" (vrefresh out of range) (II) intel(0): Not using default mode "800x600" (doublescan mode not supported) (II) intel(0): Not using default mode "1600x1200" (vrefresh out of range) (II) intel(0): Not using default mode "800x600" (doublescan mode not supported) (II) intel(0): Not using default mode "1600x1200" (vrefresh out of range) (II) intel(0): Not using default mode "800x600" (doublescan mode not supported) (II) intel(0): Not using default mode "1600x1200" (vrefresh out of range) (II) intel(0): Not using default mode "800x600" (doublescan mode not supported) (II) intel(0): Not using default mode "1792x1344" (hsync out of range) (II) intel(0): Not using default mode "896x672" (doublescan mode not supported) (II) intel(0): Not using default mode "1792x1344" (vrefresh out of range) (II) intel(0): Not using default mode "896x672" (doublescan mode not supported) (II) intel(0): Not using default mode "1856x1392" (hsync out of range) (II) intel(0): Not using default mode "928x696" (doublescan mode not supported) (II) intel(0): Not using default mode "1856x1392" (vrefresh out of range) (II) intel(0): Not using default mode "928x696" (doublescan mode not supported) (II) intel(0): Not using default mode "1920x1440" (hsync out of range) (II) intel(0): Not using default mode "960x720" (doublescan mode not supported) (II) intel(0): Not using default mode "1920x1440" (vrefresh out of range) (II) intel(0): Not using default mode "960x720" (doublescan mode not supported) (II) intel(0): Not using default mode "832x624" (vrefresh out of range) (II) intel(0): Not using default mode "416x312" (doublescan mode not supported) (II) intel(0): Not using default mode "576x432" (doublescan mode not supported) (II) intel(0): Not using default mode "1152x864" (vrefresh out of range) (II) intel(0): Not using default mode "576x432" (doublescan mode not supported) (II) intel(0): Not using default mode "1152x864" (vrefresh out of range) (II) intel(0): Not using default mode "576x432" (doublescan mode not supported) (II) intel(0): Not using default mode "1152x864" (vrefresh out of range) (II) intel(0): Not using default mode "576x432" (doublescan mode not supported) (II) intel(0): Not using default mode "1152x864" (vrefresh out of range) (II) intel(0): Not using default mode "576x432" (doublescan mode not supported) (II) intel(0): Not using default mode "1152x864" (vrefresh out of range) (II) intel(0): Not using default mode "576x432" (doublescan mode not supported) (II) intel(0): Not using default mode "1360x768" (monitor doesn't support reduced blanking) (II) intel(0): Not using default mode "680x384" (doublescan mode not supported) (II) intel(0): Not using default mode "680x384" (doublescan mode not supported) (II) intel(0): Not using default mode "1400x1050" (hsync out of range) (II) intel(0): Not using default mode "700x525" (doublescan mode not supported) (II) intel(0): Not using default mode "1400x1050" (vrefresh out of range) (II) intel(0): Not using default mode "700x525" (doublescan mode not supported) (II) intel(0): Not using default mode "1400x1050" (vrefresh out of range) (II) intel(0): Not using default mode "700x525" (doublescan mode not supported) (II) intel(0): Not using default mode "1400x1050" (vrefresh out of range) (II) intel(0): Not using default mode "700x525" (doublescan mode not supported) (II) intel(0): Not using default mode "1440x900" (hsync out of range) (II) intel(0): Not using default mode "720x450" (doublescan mode not supported) (II) intel(0): Not using default mode "1600x1024" (hsync out of range) (II) intel(0): Not using default mode "800x512" (doublescan mode not supported) (II) intel(0): Not using default mode "1680x1050" (hsync out of range) (II) intel(0): Not using default mode "840x525" (doublescan mode not supported) (II) intel(0): Not using default mode "1680x1050" (hsync out of range) (II) intel(0): Not using default mode "840x525" (doublescan mode not supported) (II) intel(0): Not using default mode "1680x1050" (vrefresh out of range) (II) intel(0): Not using default mode "840x525" (doublescan mode not supported) (II) intel(0): Not using default mode "1680x1050" (vrefresh out of range) (II) intel(0): Not using default mode "840x525" (doublescan mode not supported) (II) intel(0): Not using default mode "1680x1050" (vrefresh out of range) (II) intel(0): Not using default mode "840x525" (doublescan mode not supported) (II) intel(0): Not using default mode "1920x1080" (hsync out of range) (II) intel(0): Not using default mode "960x540" (doublescan mode not supported) (II) intel(0): Not using default mode "1920x1200" (hsync out of range) (II) intel(0): Not using default mode "960x600" (doublescan mode not supported) (II) intel(0): Not using default mode "1920x1440" (vrefresh out of range) (II) intel(0): Not using default mode "960x720" (doublescan mode not supported) (II) intel(0): Not using default mode "2048x1536" (hsync out of range) (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported) (II) intel(0): Not using default mode "2048x1536" (vrefresh out of range) (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported) (II) intel(0): Not using default mode "2048x1536" (vrefresh out of range) (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported) (II) intel(0): Printing probed modes for output VGA1 (II) intel(0): Modeline "1360x768"x59.8 84.75 1360 1432 1568 1776 768 771 781 798 -hsync +vsync (47.7 kHz) (II) intel(0): Modeline "1152x864"x60.0 81.62 1152 1216 1336 1520 864 865 868 895 -hsync +vsync (53.7 kHz) (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (II) intel(0): EDID for output LVDS1 (II) intel(0): Manufacturer: AUO Model: 1874 Serial#: 0 (II) intel(0): Year: 2005 Week: 1 (II) intel(0): EDID Version: 1.3 (II) intel(0): Digital Display Input (II) intel(0): Max Image Size [cm]: horiz.: 33 vert.: 21 (II) intel(0): Gamma: 2.20 (II) intel(0): No DPMS capabilities specified (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 (II) intel(0): First detailed timing is preferred mode (II) intel(0): redX: 0.600 redY: 0.340 greenX: 0.310 greenY: 0.560 (II) intel(0): blueX: 0.150 blueY: 0.115 whiteX: 0.313 whiteY: 0.329 (II) intel(0): Manufacturer's mask: 0 (II) intel(0): Supported detailed timing: (II) intel(0): clock: 68.9 MHz Image Size: 331 x 207 mm (II) intel(0): h_active: 1280 h_sync: 1301 h_sync_end 1333 h_blank_end 1408 h_border: 0 (II) intel(0): v_active: 800 v_sync: 804 v_sync_end 808 v_blanking: 816 v_border: 0 (II) intel(0): Unknown vendor-specific block f (II) intel(0): AUO (II) intel(0): B154EW01 V8 (II) intel(0): EDID (in hex): (II) intel(0): 00ffffffffffff0006af741800000000 (II) intel(0): 010f0103802115780a85a599574f8f26 (II) intel(0): 1d505400000001010101010101010101 (II) intel(0): 010101010101ea1a0080502010301520 (II) intel(0): 44004bcf100000180000000f00000000 (II) intel(0): 00000000000000000002000000fe0041 (II) intel(0): 554f0a202020202020202020000000fe (II) intel(0): 004231353445573031205638200a00ce (II) intel(0): Not using default mode "320x240" (doublescan mode not supported) (II) intel(0): Not using default mode "400x300" (doublescan mode not supported) (II) intel(0): Not using default mode "400x300" (doublescan mode not supported) (II) intel(0): Not using default mode "512x384" (doublescan mode not supported) (II) intel(0): Not using default mode "640x480" (doublescan mode not supported) (II) intel(0): Not using default mode "640x512" (doublescan mode not supported) (II) intel(0): Not using default mode "800x600" (doublescan mode not supported) (II) intel(0): Not using default mode "896x672" (doublescan mode not supported) (II) intel(0): Not using default mode "928x696" (doublescan mode not supported) (II) intel(0): Not using default mode "960x720" (doublescan mode not supported) (II) intel(0): Not using default mode "576x432" (doublescan mode not supported) (II) intel(0): Not using default mode "680x384" (doublescan mode not supported) (II) intel(0): Not using default mode "680x384" (doublescan mode not supported) (II) intel(0): Not using default mode "700x525" (doublescan mode not supported) (II) intel(0): Not using default mode "720x450" (doublescan mode not supported) (II) intel(0): Not using default mode "800x512" (doublescan mode not supported) (II) intel(0): Not using default mode "840x525" (doublescan mode not supported) (II) intel(0): Not using default mode "840x525" (doublescan mode not supported) (II) intel(0): Not using default mode "960x540" (doublescan mode not supported) (II) intel(0): Not using default mode "960x600" (doublescan mode not supported) (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported) (II) intel(0): Printing probed modes for output LVDS1 (II) intel(0): Modeline "1280x800"x60.0 68.90 1280 1301 1333 1408 800 804 808 816 -hsync -vsync (48.9 kHz) (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (II) intel(0): EDID for output TV1 (II) intel(0): Output VGA1 connected (II) intel(0): Output LVDS1 connected (II) intel(0): Output TV1 disconnected (II) intel(0): Using fuzzy aspect match for initial modes (II) intel(0): Output VGA1 using initial mode 1024x768 (II) intel(0): Output LVDS1 using initial mode 1024x768 (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated. (==) intel(0): DPI set to (96, 96) (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /usr/lib/xorg/modules/libfb.so (II) Module fb: vendor="X.Org Foundation" compiled for 1.7.7, module version = 1.0.0 ABI class: X.Org ANSI C Emulation, version 0.4 (II) UnloadModule: "vesa" (II) Unloading /usr/lib/xorg/modules/drivers/vesa_drv.so (II) UnloadModule: "fbdev" (II) Unloading /usr/lib/xorg/modules/drivers/fbdev_drv.so (II) UnloadModule: "fbdevhw" (II) Unloading /usr/lib/xorg/modules/linux/libfbdevhw.so (==) Depth 24 pixmap format is 32 bpp (II) intel(0): [DRI2] Setup complete (**) intel(0): Tiling enabled (**) intel(0): SwapBuffers wait enabled (==) intel(0): VideoRam: 262144 KB (II) intel(0): Allocated new frame buffer 1024x768 stride 4096, tiled (II) UXA(0): Driver registered support for the following operations: (II) solid (II) copy (II) composite (RENDER acceleration) (II) put_image (II) get_image (==) intel(0): Backing store disabled (==) intel(0): Silken mouse enabled (II) intel(0): Initializing HW Cursor (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. (==) intel(0): DPMS enabled (==) intel(0): Intel XvMC decoder disabled (II) intel(0): Set up textured video (II) intel(0): direct rendering: DRI2 Enabled (--) RandR disabled (II) Initializing built-in extension Generic Event Extension (II) Initializing built-in extension SHAPE (II) Initializing built-in extension MIT-SHM (II) Initializing built-in extension XInputExtension (II) Initializing built-in extension XTEST (II) Initializing built-in extension BIG-REQUESTS (II) Initializing built-in extension SYNC (II) Initializing built-in extension XKEYBOARD (II) Initializing built-in extension XC-MISC (II) Initializing built-in extension SECURITY (II) Initializing built-in extension XINERAMA (II) Initializing built-in extension XFIXES (II) Initializing built-in extension RENDER (II) Initializing built-in extension RANDR (II) Initializing built-in extension COMPOSITE (II) Initializing built-in extension DAMAGE SELinux: Disabled on system, not enabling in X server (II) AIGLX: enabled GLX_MESA_copy_sub_buffer (II) AIGLX: enabled GLX_SGI_make_current_read (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects (II) AIGLX: Loaded and initialized /usr/lib/dri/i915_dri.so (II) GLX: Initialized DRI2 GL provider for screen 0 (II) intel(0): Setting screen physical size to 270 x 203 (II) config/udev: Adding input device Power Button (/dev/input/event3) (**) Power Button: Applying InputClass "evdev keyboard catchall" (II) LoadModule: "evdev" (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so (II) Module evdev: vendor="X.Org Foundation" compiled for 1.7.6.901, module version = 2.3.2 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 7.0 (**) Power Button: always reports core events (**) Power Button: Device: "/dev/input/event3" (II) Power Button: Found keys (II) Power Button: Configuring as keyboard (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "pc105" (**) Option "xkb_layout" "es" (**) Option "xkb_variant" "cat" (II) config/udev: Adding input device Power Button (/dev/input/event5) (**) Power Button: Applying InputClass "evdev keyboard catchall" (**) Power Button: always reports core events (**) Power Button: Device: "/dev/input/event5" (II) Power Button: Found keys (II) Power Button: Configuring as keyboard (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "pc105" (**) Option "xkb_layout" "es" (**) Option "xkb_variant" "cat" (II) config/udev: Adding input device Lid Switch (/dev/input/event4) (II) No input driver/identifier specified (ignoring) (II) config/udev: Adding input device Sleep Button (/dev/input/event6) (**) Sleep Button: Applying InputClass "evdev keyboard catchall" (**) Sleep Button: always reports core events (**) Sleep Button: Device: "/dev/input/event6" (II) Sleep Button: Found keys (II) Sleep Button: Configuring as keyboard (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "pc105" (**) Option "xkb_layout" "es" (**) Option "xkb_variant" "cat" (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event8) (II) No input driver/identifier specified (ignoring) (II) config/udev: Adding input device Logitech USB Laser Mouse (/dev/input/event1) (**) Logitech USB Laser Mouse: Applying InputClass "evdev pointer catchall" (**) Logitech USB Laser Mouse: always reports core events (**) Logitech USB Laser Mouse: Device: "/dev/input/event1" (II) Logitech USB Laser Mouse: Found 12 mouse buttons (II) Logitech USB Laser Mouse: Found scroll wheel(s) (II) Logitech USB Laser Mouse: Found relative axes (II) Logitech USB Laser Mouse: Found x and y relative axes (II) Logitech USB Laser Mouse: Configuring as mouse (**) Logitech USB Laser Mouse: YAxisMapping: buttons 4 and 5 (**) Logitech USB Laser Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 (II) XINPUT: Adding extended input device "Logitech USB Laser Mouse" (type: MOUSE) (II) Logitech USB Laser Mouse: initialized for relative axes. (II) config/udev: Adding input device Logitech USB Laser Mouse (/dev/input/mouse0) (II) No input driver/identifier specified (ignoring) (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0) (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall" (**) AT Translated Set 2 keyboard: always reports core events (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0" (II) AT Translated Set 2 keyboard: Found keys (II) AT Translated Set 2 keyboard: Configuring as keyboard (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "pc105" (**) Option "xkb_layout" "es" (**) Option "xkb_variant" "cat" (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event7) (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall" (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall" (II) LoadModule: "synaptics" (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so (II) Module synaptics: vendor="X.Org Foundation" compiled for 1.7.6.901, module version = 1.2.2 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 7.0 (II) Synaptics touchpad driver version 1.2.2 (**) Option "Device" "/dev/input/event7" (II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472 (II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448 (II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255 (II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0 (II) SynPS/2 Synaptics TouchPad: buttons: left right middle double triple (--) SynPS/2 Synaptics TouchPad: touchpad found (**) SynPS/2 Synaptics TouchPad: always reports core events (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD) (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1 (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 0 (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000 (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4 (--) SynPS/2 Synaptics TouchPad: touchpad found (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1) (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall" (II) Synaptics touchpad driver version 1.2.2 SynPS/2 Synaptics TouchPad no synaptics event device found (**) Option "Device" "/dev/input/mouse1" Query no Synaptics: 6003C8 (--) SynPS/2 Synaptics TouchPad: no supported touchpad found (EE) SynPS/2 Synaptics TouchPad Unable to query/initialize Synaptics hardware. (EE) PreInit failed for input device "SynPS/2 Synaptics TouchPad" (II) UnloadModule: "synaptics" (II) config/udev: Adding input device PC Speaker (/dev/input/event2) (II) No input driver/identifier specified (ignoring) (II) config/udev: Adding input device ACPI Virtual Keyboard Device (/dev/input/event9) (**) ACPI Virtual Keyboard Device: Applying InputClass "evdev keyboard catchall" (**) ACPI Virtual Keyboard Device: always reports core events (**) ACPI Virtual Keyboard Device: Device: "/dev/input/event9" (II) ACPI Virtual Keyboard Device: Found keys (II) ACPI Virtual Keyboard Device: Configuring as keyboard (II) XINPUT: Adding extended input device "ACPI Virtual Keyboard Device" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "pc105" (**) Option "xkb_layout" "es" (**) Option "xkb_variant" "cat" (II) intel(0): EDID vendor "AUO", prod id 6260 (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1280x800"x0.0 68.90 1280 1301 1333 1408 800 804 808 816 -hsync -vsync (48.9 kHz) (II) intel(0): EDID vendor "AUO", prod id 6260 (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1280x800"x0.0 68.90 1280 1301 1333 1408 800 804 808 816 -hsync -vsync (48.9 kHz) (II) intel(0): EDID vendor "AUO", prod id 6260 (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1280x800"x0.0 68.90 1280 1301 1333 1408 800 804 808 816 -hsync -vsync (48.9 kHz) (II) intel(0): Allocated new frame buffer 1280x800 stride 8192, tiled (II) intel(0): EDID vendor "AUO", prod id 6260 (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1280x800"x0.0 68.90 1280 1301 1333 1408 800 804 808 816 -hsync -vsync (48.9 kHz) (EE) intel(0): Failed to submit batch buffer, expect rendering corruption or even a frozen display: Cannot allocate memory. (EE) intel(0): Failed to submit batch buffer, expect rendering corruption or even a frozen display: Cannot allocate memory. (EE) intel(0): Failed to submit batch buffer, expect rendering corruption or even a frozen display: Cannot allocate memory. (EE) intel(0): Failed to submit batch buffer, expect rendering corruption or even a frozen display: Cannot allocate memory. udev information: P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3 N: input/event3 S: char/13:67 E: UDEV_LOG=3 E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3 E: SUBSYSTEM=input E: DEVNAME=/dev/input/event3 E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: XKBMODEL=pc105 E: XKBLAYOUT=es E: XKBVARIANT=cat E: MAJOR=13 E: MINOR=67 E: DEVLINKS=/dev/char/13:67 E: DMI_VENDOR=BenQ P: /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5/event5 N: input/event5 S: char/13:69 E: UDEV_LOG=3 E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5/event5 E: SUBSYSTEM=input E: DEVNAME=/dev/input/event5 E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: XKBMODEL=pc105 E: XKBLAYOUT=es E: XKBVARIANT=cat E: MAJOR=13 E: MINOR=69 E: DEVLINKS=/dev/char/13:69 E: DMI_VENDOR=BenQ P: /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4/event4 N: input/event4 S: char/13:68 E: UDEV_LOG=3 E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4/event4 E: SUBSYSTEM=input E: DEVNAME=/dev/input/event4 E: ID_INPUT=1 E: DMI_VENDOR=BenQ E: MAJOR=13 E: MINOR=68 E: DEVLINKS=/dev/char/13:68 P: /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input6/event6 N: input/event6 S: char/13:70 E: UDEV_LOG=3 E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input6/event6 E: SUBSYSTEM=input E: DEVNAME=/dev/input/event6 E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: XKBMODEL=pc105 E: XKBLAYOUT=es E: XKBVARIANT=cat E: MAJOR=13 E: MINOR=70 E: DEVLINKS=/dev/char/13:70 E: DMI_VENDOR=BenQ P: /devices/pci0000:00/0000:00:1b.0/input/input8/event8 N: input/event8 S: char/13:72 E: UDEV_LOG=3 E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/input/input8/event8 E: SUBSYSTEM=input E: DEVNAME=/dev/input/event8 E: ID_INPUT=1 E: ID_PATH=pci-0000:00:1b.0 E: DMI_VENDOR=BenQ E: MAJOR=13 E: MINOR=72 E: DEVLINKS=/dev/char/13:72 P: /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input1/event1 N: input/event1 S: char/13:65 S: input/by-id/usb-Logitech_USB_Laser_Mouse-event-mouse S: input/by-path/pci-0000:00:1d.1-usb-0:2:1.0-event-mouse E: UDEV_LOG=3 E: DEVPATH=/devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input1/event1 E: SUBSYSTEM=input E: DEVNAME=/dev/input/event1 E: ID_INPUT=1 E: ID_INPUT_MOUSE=1 E: ID_VENDOR=Logitech E: ID_VENDOR_ENC=Logitech E: ID_VENDOR_ID=046d E: ID_MODEL=USB_Laser_Mouse E: ID_MODEL_ENC=USB\x20Laser\x20Mouse E: ID_MODEL_ID=c062 E: ID_REVISION=3100 E: ID_SERIAL=Logitech_USB_Laser_Mouse E: ID_TYPE=hid E: ID_BUS=usb E: ID_USB_INTERFACES=:030102: E: ID_USB_INTERFACE_NUM=00 E: ID_USB_DRIVER=usbhid E: ID_PATH=pci-0000:00:1d.1-usb-0:2:1.0 E: MAJOR=13 E: MINOR=65 E: DEVLINKS=/dev/char/13:65 /dev/input/by-id/usb-Logitech_USB_Laser_Mouse-event-mouse /dev/input/by-path/pci-0000:00:1d.1-usb-0:2:1.0-event-mouse P: /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input1/mouse0 N: input/mouse0 S: char/13:32 S: input/by-id/usb-Logitech_USB_Laser_Mouse-mouse S: input/by-path/pci-0000:00:1d.1-usb-0:2:1.0-mouse E: UDEV_LOG=3 E: DEVPATH=/devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input1/mouse0 E: SUBSYSTEM=input E: DEVNAME=/dev/input/mouse0 E: ID_INPUT=1 E: ID_INPUT_MOUSE=1 E: ID_VENDOR=Logitech E: ID_VENDOR_ENC=Logitech E: ID_VENDOR_ID=046d E: ID_MODEL=USB_Laser_Mouse E: ID_MODEL_ENC=USB\x20Laser\x20Mouse E: ID_MODEL_ID=c062 E: ID_REVISION=3100 E: ID_SERIAL=Logitech_USB_Laser_Mouse E: ID_TYPE=hid E: ID_BUS=usb E: ID_USB_INTERFACES=:030102: E: ID_USB_INTERFACE_NUM=00 E: ID_USB_DRIVER=usbhid E: ID_PATH=pci-0000:00:1d.1-usb-0:2:1.0 E: MAJOR=13 E: MINOR=32 E: DEVLINKS=/dev/char/13:32 /dev/input/by-id/usb-Logitech_USB_Laser_Mouse-mouse /dev/input/by-path/pci-0000:00:1d.1-usb-0:2:1.0-mouse P: /devices/platform/i8042/serio0/input/input0/event0 N: input/event0 S: char/13:64 S: input/by-path/platform-i8042-serio-0-event-kbd E: UDEV_LOG=3 E: DEVPATH=/devices/platform/i8042/serio0/input/input0/event0 E: SUBSYSTEM=input E: DEVNAME=/dev/input/event0 E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_INPUT_KEYBOARD=1 E: ID_SERIAL=noserial E: ID_PATH=platform-i8042-serio-0 E: XKBMODEL=pc105 E: XKBLAYOUT=es E: XKBVARIANT=cat E: MAJOR=13 E: MINOR=64 E: DEVLINKS=/dev/char/13:64 /dev/input/by-path/platform-i8042-serio-0-event-kbd E: DMI_VENDOR=BenQ P: /devices/platform/i8042/serio1/input/input7/event7 N: input/event7 S: char/13:71 S: input/by-path/platform-i8042-serio-1-event-mouse E: UDEV_LOG=3 E: DEVPATH=/devices/platform/i8042/serio1/input/input7/event7 E: SUBSYSTEM=input E: DEVNAME=/dev/input/event7 E: ID_INPUT=1 E: ID_INPUT_TOUCHPAD=1 E: ID_SERIAL=noserial E: ID_PATH=platform-i8042-serio-1 E: DMI_VENDOR=BenQ E: MAJOR=13 E: MINOR=71 E: DEVLINKS=/dev/char/13:71 /dev/input/by-path/platform-i8042-serio-1-event-mouse P: /devices/platform/i8042/serio1/input/input7/mouse1 N: input/mouse1 S: char/13:33 S: input/by-path/platform-i8042-serio-1-mouse E: UDEV_LOG=3 E: DEVPATH=/devices/platform/i8042/serio1/input/input7/mouse1 E: SUBSYSTEM=input E: DEVNAME=/dev/input/mouse1 E: ID_INPUT=1 E: ID_INPUT_TOUCHPAD=1 E: ID_SERIAL=noserial E: ID_PATH=platform-i8042-serio-1 E: MAJOR=13 E: MINOR=33 E: DEVLINKS=/dev/char/13:33 /dev/input/by-path/platform-i8042-serio-1-mouse P: /devices/platform/pcspkr/input/input2/event2 N: input/event2 S: char/13:66 S: input/by-path/platform-pcspkr-event-spkr E: UDEV_LOG=3 E: DEVPATH=/devices/platform/pcspkr/input/input2/event2 E: SUBSYSTEM=input E: DEVNAME=/dev/input/event2 E: ID_INPUT=1 E: ID_SERIAL=noserial E: ID_PATH=platform-pcspkr E: DMI_VENDOR=BenQ E: MAJOR=13 E: MINOR=66 E: DEVLINKS=/dev/char/13:66 /dev/input/by-path/platform-pcspkr-event-spkr P: /devices/virtual/input/input9/event9 N: input/event9 S: char/13:73 E: UDEV_LOG=3 E: DEVPATH=/devices/virtual/input/input9/event9 E: SUBSYSTEM=input E: DEVNAME=/dev/input/event9 E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_INPUT_KEYBOARD=1 E: ID_SERIAL=noserial E: XKBMODEL=pc105 E: XKBLAYOUT=es E: XKBVARIANT=cat E: MAJOR=13 E: MINOR=73 E: DEVLINKS=/dev/char/13:73 E: DMI_VENDOR=BenQ DRM Information from dmesg: [ 9.752081] Linux agpgart interface v0.103 [ 9.779445] intelfb: cannot acquire agp [ 9.897787] agpgart-intel 0000:00:00.0: Intel 915GM Chipset [ 9.898382] agpgart-intel 0000:00:00.0: detected 7932K stolen memory [ 9.901037] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000 [ 25.862975] [drm] Initialized drm 1.1.0 20060810 [ 26.974223] fb0: inteldrmfb frame buffer device [ 26.974254] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 27.037932] [drm] LVDS-8: set mode 1280x800 16 [ 28.975001] [drm] DAC-6: set mode 1024x768 21 [ 29.271803] [drm] LVDS-8: set mode 1024x768 22 [ 49.447359] [drm] LVDS-8: set mode 20 [ 2025.110760] [drm:i915_gem_object_bind_to_gtt] *ERROR* GTT full, but LRU list empty [ 2025.110772] [drm:i915_gem_object_pin] *ERROR* Failure to bind: -12 [ 2025.110980] [drm:i915_gem_evict_something] *ERROR* inactive empty 1 request empty 1 flushing empty 1 [ 2025.111500] [drm:i915_gem_object_bind_to_gtt] *ERROR* GTT full, but LRU list empty [ 2025.111506] [drm:i915_gem_object_pin] *ERROR* Failure to bind: -12 [ 2025.111512] [drm:i915_gem_execbuffer] *ERROR* Failed to pin buffers -12 [ 2025.172607] [drm:i915_gem_object_bind_to_gtt] *ERROR* GTT full, but LRU list empty [ 2025.172614] [drm:i915_gem_object_pin] *ERROR* Failure to bind: -12 [ 2025.178215] [drm:i915_gem_evict_something] *ERROR* inactive empty 1 request empty 1 flushing empty 1 [ 2025.178466] [drm:i915_gem_object_bind_to_gtt] *ERROR* GTT full, but LRU list empty [ 2025.178469] [drm:i915_gem_object_pin] *ERROR* Failure to bind: -12 [ 2025.178472] [drm:i915_gem_execbuffer] *ERROR* Failed to pin buffers -12 [ 2025.202124] [drm:i915_gem_object_bind_to_gtt] *ERROR* GTT full, but LRU list empty [ 2025.202131] [drm:i915_gem_object_pin] *ERROR* Failure to bind: -12 [ 2025.202278] [drm:i915_gem_evict_something] *ERROR* inactive empty 1 request empty 1 flushing empty 1 [ 2025.202526] [drm:i915_gem_object_bind_to_gtt] *ERROR* GTT full, but LRU list empty [ 2025.202529] [drm:i915_gem_object_pin] *ERROR* Failure to bind: -12 [ 2025.202532] [drm:i915_gem_execbuffer] *ERROR* Failed to pin buffers -12 [ 2025.278494] [drm:i915_gem_object_bind_to_gtt] *ERROR* GTT full, but LRU list empty [ 2025.278501] [drm:i915_gem_object_pin] *ERROR* Failure to bind: -12 [ 2025.284236] [drm:i915_gem_evict_something] *ERROR* inactive empty 1 request empty 1 flushing empty 1 [ 2025.284518] [drm:i915_gem_object_bind_to_gtt] *ERROR* GTT full, but LRU list empty [ 2025.284521] [drm:i915_gem_object_pin] *ERROR* Failure to bind: -12 [ 2025.284524] [drm:i915_gem_execbuffer] *ERROR* Failed to pin buffers -12 -- System Information: Debian Release: squeeze/sid APT prefers testing APT policy: (500, 'testing') Architecture: i386 (i686) Kernel: Linux 2.6.30-1-686 (SMP w/1 CPU core) Locale: LANG=en_US.ISO-8859-15, LC_CTYPE=en_US.ISO-8859-15 (charmap=ISO-8859-15) Shell: /bin/sh linked to /bin/dash Versions of packages xserver-xorg-video-intel depends on: ii libc6 2.11.2-6+squeeze1 Embedded GNU C Library: Shared lib ii libdrm-intel1 2.4.21-1~squeeze3 Userspace interface to intel-speci ii libdrm2 2.4.21-1~squeeze3 Userspace interface to kernel DRM ii libpciaccess0 0.12.0-1 Generic PCI access library for X ii libx11-6 2:1.3.3-3 X11 client-side library ii libx11-xcb1 2:1.3.3-3 Xlib/XCB interface library ii libxcb-aux0 0.3.6-1 utility libraries for X C Binding ii libxcb-dri2-0 1.6-1 X C Binding, dri2 extension ii libxcb1 1.6-1 X C Binding ii libxext6 2:1.1.2-1 X11 miscellaneous extension librar ii libxfixes3 1:4.0.5-1 X11 miscellaneous 'fixes' extensio ii libxv1 2:1.0.5-1 X11 Video extension library ii libxvmc1 2:1.0.5-1 X11 Video extension library ii xserver-xorg-core [xor 2:1.7.7-8 Xorg X server - core server xserver-xorg-video-intel recommends no packages. xserver-xorg-video-intel suggests no packages. -- no debconf information -- To UNSUBSCRIBE, email to [email protected] with a subject of "unsubscribe". Trouble? Contact [email protected] Archive: http://lists.debian.org/[email protected]
