On Thu, Apr 22, 2004 at 11:09:11PM -0700, Phil Ramey wrote: > Kevin Mark: > > Thanks for replying! > > Attaching my iRiver to my usb2 card gives me this > output in /var/log/messages, do i need to add a > listing in /etc/fstab or sommat? i can't mount it, > there's no listing... > > Apr 22 22:59:50 box kernel: usb 1-1: new high speed > USB device using address 2 > Apr 22 22:59:50 box kernel: scsi0 : SCSI emulation for > USB Mass Storage devices > Apr 22 22:59:51 box kernel: Vendor: TOSHIBA Model: > MK2004GAL Rev: JA02 > Apr 22 22:59:51 box kernel: Type: Direct-Access > ANSI SCSI revision: 02 > Apr 22 22:59:51 box kernel: SCSI device sda: 39063024 > 512-byte hdwr sectors (20000 MB) > Apr 22 22:59:51 box kernel: sda:<7>usb-storage: > queuecommand called > Apr 22 22:59:52 box kernel: sda1 > Apr 22 22:59:52 box kernel: Attached scsi disk sda at > scsi0, channel 0, id 0, lun 0 Hi Phil, this indicates that your iRiver is recognized as a usb device. All usb drives show up as SCSI devices. SCSI hard drives show up as /dev/sdXN and IDE hard disks show up as /dev/hdXN. So, your iRiver is /dev/sda1. To use this device, you make a mount point. A mount point is basically a 'directory' where you want your device to show up in the / (the root file system). So, mkdir /mnt/iriver mount /dev/sd1 /mnt/iriver cd /mnt/iriver ls (you should see your files here!) Adding it to your /etc/fstab is another step. you may want to 'man fstab' and 'man mount' for more info.
> > i'm assuming that this is more important than the > lspci listing, because this shows the hardware works > fine... > > the fdisk -l thing returns the drive that works along > with: > > Disk /dev/hdd: 81.9 GB, 81964302336 bytes > 255 heads, 63 sectors/track, 9964 cylinders > Units = cylinders of 16065 * 512 = 8225280 bytes > > Device Boot Start End Blocks Id > System > /dev/hdd1 2 9964 80027797+ f > W95 Ext'd (LBA) > /dev/hdd5 2 9964 80027766 b > W95 FAT32 > > i can't, however, mount /dev/hdd5, and when i added it > to fstab, it griped about mount points (i put in o> /mnt/hdd5 as the mount point, should it be different?) From the above comment, /dev/hdd5 is the disk for your mp3's. So, mkdir /mnt/mp3 mount /dev/hdd5 /mnt/mp3 cd /mnt/mp3 ls (you should see your files!) making this perminant by adding it to /etc/fstab. -Kev
signature.asc
Description: Digital signature
