On Wed, Apr 21, 2004 at 12:22:11AM +0200, Tom Peters wrote: > Following the HOWTO's I try to mount my digital USB camera in the > following way: > > sudo mount -t vfat /dev/sda1 /camera > mount: /dev/sda1 is not a valid block device > > The mount table has: > none on /proc/bus/usb type usbdevfs (rw,devuid=0,devgid=107,devmode=0660) > > /proc/bus/usb/devices does see: > T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 > D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 > P: Vendor=04b0 ProdID=0116 Rev= 1.00 > S: Manufacturer=NIKON > S: Product=NIKON DSC E2100 > S: SerialNumber=000004652474 > C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA > I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage > E: Ad=04(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms > E: Ad=83(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms > I: If#= 0 Alt= 1 #EPs= 3 Cls=ff(vend.) Sub=06 Prot=50 Driver=usb-storage > E: Ad=04(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms > E: Ad=83(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms > E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=32ms > > I got the following relevant modules loaded: > usb-storage 46360 0 (autoclean) (unused) > usb-uhci 21132 0 (unused) > usbcore 55360 1 [usb-storage usb-uhci] > scsi_mod 91660 2 [usb-storage ide-scsi] > ide-scsi 8752 0 > scsi_mod 91660 2 [usb-storage ide-scsi] > > This works with kernels up to 2.4.19, but I don't get it working with > later 2.4 kernels. What is wrong? Hi never rely on it always being /dev/sda1. I check /var/log/message (maybe use 'tail -f /var/log/messages' in an xterm before you insert the camera) and then see what IT says about your usb storage device. -Kev
signature.asc
Description: Digital signature
