Use kernel 2.6.5, The prism driver is now a part of that kernel. Damon L. Chesser wrote:
> mixo wrote: > >> After installing 2.6.4 kernel, the driver for 2.4.18 kernel does not >> get loaded. In fact I get >> modprobe: Can't locate module prism2_cs >> >> and, from insmod: >> prism2_cs.o: prism2_cs.o: unresolved symbol p80211netdev_hwremoved >> prism2_cs.o: prism2_cs.o: unresolved symbol p802addr_to_str >> prism2_cs.o: prism2_cs.o: unresolved symbol register_wlandev >> prism2_cs.o: prism2_cs.o: unresolved symbol p80211netdev_rx >> prism2_cs.o: prism2_cs.o: unresolved symbol unregister_wlandev >> prism2_cs.o: prism2_cs.o: unresolved symbol wlan_setup >> prism2_cs.o: prism2_cs.o: unresolved symbol wlan_unsetup >> >> This would be understable if I was trying to load ther driver under >> 2.6.4, but this is under my old >> 2.4.18. >> >> >> > This is unclear to me. Are you trying to use the device needing the > prism54 driver under 2.6.4? If so, you need to link the driver to the > kernel (re-compile the driver under 2.6.4), if not, you need to remove > the driver. AFAIK, if you compiled it under 2.4.18, then recompiled > your kernel, the driver is STILL there only now it can't work since the > kernel changed. Remove it or re-compile it. I am not a gueru and some > smart person might have more insite, but that is how I understand it. HTH > -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
