On Mon, 5 Apr 2004 16:10:52 -0400 Gregory Seidman <[EMAIL PROTECTED]> wrote:
>On Mon, Apr 05, 2004 at 09:36:04PM +0200, messmate wrote: >} Hi list, >} here is my big problem: >} I've a CAD-CAM system equiped with 1 big monitor (for the >drawing's) } and 1 litte(15") who's display the menu. >} The graphic cards are : >} 1 double artist-card for the drawings monitor. >} 1 trident TGUI9440 card for the 15" monitor. >} >} I've installed on other partitions debian woody. >} But can't get working the xserver on the 15" monitor with his >trident} card. >} Setted the pci id bus as " PCI:0:12:0" after a lspci to detect it. >} And the xserver won't start; the message is : >} "TRIDENT: no matching device section for instance (Bus ID >PCI:0:18:0)} found. No devices detected." >} >} I've setted the bus ID to 12 and not 18 !!! > >Remember that lspci reports ids in hexadecimal, and the XF86Config >needs them in decimal. Hex 12 is decimal 18. What appears to be >happening is that the trident driver is loading, knows from probing >that it's at 0x12(decimal 18), doesn't find a matching device section >in the XF86Config, thus complains. Set it to 18 in the XF86Config and >it should work better. > >} What can I o ? >} Any help would be very appreciated. >} mess-mate >--Greg > Thanks, you're right. Setting to 18 do it :) A 'XFree86 -scanpci -verbose' and the 18 was there. But there must be something wrong with X; it's slow, slow.... I've setted the depht to 8 (1024/768) and only blackbox would start. The card mem is 2048K. and 128M on motherboard. Was enough on another machine to run everything. Swap = 150M. Pentium 233MMX. What would be still wrong ? To little HD space ? mess-mate -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
