On Sat, Mar 13, 2004 at 05:36:22PM +0000, Sascha Petranka wrote: > Hi, > > I've ASUS L8400B notebook with synaptics touchpad and an external PS/2 > mouse attached. With Kernel 2.4.x both devices funtioned correctly. > Now, with the kernel 2.6.4 and the synaptics driver installed, the > touchpad works fine again but the external PS/2 mouse does not. When I > move the external mouse on X, nothing happens but when I move the > mouse on a console or gpm the message "Synaptics driver lost sync at > byte 1" scrolls over the screen. When I touched once the touchpad a > message "Synaptics driver resynced" appears once. > > What can I do, to get my PS/2 mouse working again? >
Try using /dev/input/mice as the interface. All mice should be routed to that interface emulated as ImPS2 > Thanks for your answers... > > My dates are: > > System: Debian Woody, Kernel 2.6.4, XFree86 4.3 > > Dmesg: > > > drivers/usb/core/usb.c: registered new driver hid > drivers/usb/input/hid-core.c: v2.0:USB HID core driver > mice: PS/2 mouse device common for all mice > serio: i8042 AUX port at 0x60,0x64 irq 12 > Synaptics Touchpad, model: 1 > Firmware: 4.6 > Sensor: 19 > new absolute packet format > Touchpad has extended capability bits > -> multifinger detection > -> palm detection > input: SynPS/2 Synaptics TouchPad on isa0060#/serio1 > serio: i8042 KBD port at 0x60,0x64 irq 1 > input: AT Translated Set 2 keyboard on isa0060/serio0 > > > Kernel config: > > # > # Userland interfaces > # > CONFIG_INPUT_MOUSEDEV=y > CONFIG_INPUT_MOUSEDEV_PSAUX=y > CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 > CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 > # CONFIG_INPUT_JOYDEV is not set > CONFIG_INPUT_TSDEV=m > CONFIG_INPUT_TSDEV_SCREEN_X=240 > CONFIG_INPUT_TSDEV_SCREEN_Y=320 > CONFIG_INPUT_EVDEV=m > # CONFIG_INPUT_EVBUG is not set > > # > # Input I/O drivers > # > # CONFIG_GAMEPORT is not set > CONFIG_SOUND_GAMEPORT=y > CONFIG_SERIO=y > CONFIG_SERIO_I8042=y > # CONFIG_SERIO_SERPORT is not set > # CONFIG_SERIO_CT82C710 is not set > # CONFIG_SERIO_PARKBD is not set > # CONFIG_SERIO_PCIPS2 is not set > > # > # Input Device Drivers > # > CONFIG_INPUT_KEYBOARD=y > CONFIG_KEYBOARD_ATKBD=y > # CONFIG_KEYBOARD_SUNKBD is not set > # CONFIG_KEYBOARD_XTKBD is not set > # CONFIG_KEYBOARD_NEWTON is not set > CONFIG_INPUT_MOUSE=y > CONFIG_MOUSE_PS2=y > # CONFIG_MOUSE_SERIAL is not set > # CONFIG_INPUT_JOYSTICK is not set > # CONFIG_INPUT_TOUCHSCREEN is not set > # CONFIG_INPUT_MISC is not set > > Output cat /proc/bus/input/devices: > > I: Bus=0011 Vendor=0002 Product=0007 Version=0000 > N: Name="SynPS/2 Synaptics TouchPad" > P: Phys=isa0060/serio1/input0 > H: Handlers=mouse0 event0 > B: EV=b > B: KEY=6420 0 670000 0 0 0 0 0 0 0 0 > B: ABS=11000003 > > I: Bus=0011 Vendor=0001 Product=0001 Version=ab41 > N: Name="AT Translated Set 2 keyboard" > P: Phys=isa0060/serio0/input0 > H: Handlers=kbd event1 > B: EV=120003 > B: KEY=4 2000000 3802078 f840d001 f2ffffdf ffefffff ffffffff fffffffe > B: LED=7 > > XF86Config: > > > Section "InputDevice" > Driver "synaptics" > Identifier "Mouse[1]" > Option "Device" "/dev/psaux" > Option "Protocol" "auto-dev" > Option "LeftEdge" "1700" > Option "RightEdge" "5300" > Option "TopEdge" "1700" > Option "BottomEdge" "4200" > Option "FingerLow" "25" > Option "FingerHigh" "30" > Option "MaxTapTime" "180" > Option "MaxTapMove" "220" > Option "VertScrollDelta" "100" > Option "MinSpeed" "0.06" > Option "MaxSpeed" "0.12" > Option "AccelFactor" "0.0010" > Option "SHMConfig" "on" > # Option "Repeater" "/dev/ps2mouse" > EndSection > > #Section "InputDevice" > # Identifier "Configured Mouse" > # Driver "mouse" > # Option "CorePointer" > # Option "Device" "/dev/psaux" > # Option "Device" "/dev/input/mice" > # Option "Protocol" "PS/2" > # Option "Protocol" "ImPS/2" > # Option "Emulate3Buttons" "true" > # Option "ZAxisMapping" "4 5" > #EndSection > > Section "InputDevice" > Identifier "Generic Mouse" > Driver "mouse" > Option "SendCoreEvents" "true" > Option "Device" "/dev/input/mouse0" > # Option "Device" "/dev/psaux" > Option "Protocol" "ImPS/2" > Option "Emulate3Buttons" "true" > Option "ZAxisMapping" "4 5" > EndSection > > Section "ServerLayout" > Identifier "Default Layout" > Screen "Default Screen" > InputDevice "Generic Keyboard" > # InputDevice "Configured Mouse" "AlwaysCore" > InputDevice "Mouse[1]" "CorePointer" > # InputDevice "Generic Mouse" "AlwaysCore" > InputDevice "Generic Mouse" > EndSection > > XF86.0.log: > > > (II) Keyboard "Generic Keyboard" handled by legacy driver > (II) Synaptics touchpad driver version 0.12.5 > (--) Mouse[1] auto-dev sets Synaptics Device to /dev/input/event0 > (**) Option "Device" "/dev/input/event0" > (**) Option "SHMConfig" "on" > (**) Option "LeftEdge" "1700" > (**) Option "RightEdge" "5300" > (**) Option "TopEdge" "1700" > (**) Option "BottomEdge" "4200" > (**) Option "FingerLow" "25" > (**) Option "FingerHigh" "30" > (**) Option "MaxTapTime" "180" > (**) Option "MaxTapMove" "220" > (**) Option "VertScrollDelta" "100" > (**) Option "CorePointer" > (**) Mouse[1]: Core Pointer > (**) Option "Protocol" "ImPS/2" > (**) Generic Mouse: Protocol: "ImPS/2" > (**) Option "SendCoreEvents" "true" > (**) Generic Mouse: always reports core events > (**) Option "Device" "/dev/input/mouse0" > (**) Option "Emulate3Buttons" "true" > (**) Generic Mouse: Emulate3Buttons, Emulate3Timeout: 50 > (**) Option "ZAxisMapping" "4 5" > (**) Generic Mouse: ZAxisMapping: buttons 4 and 5 > (**) Generic Mouse: Buttons: 5 > (II) XINPUT: Adding extended input device "Generic Mouse" (type: > MOUSE) > (II) XINPUT: Adding extended input device "Mouse[1]" (type: MOUSE) > Synaptics DeviceInit called > SynapticsCtrl called. > Synaptics DeviceOn called > (II) Generic Mouse: ps2EnableDataReporting: succeeded > > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] > > > +++++++++++++++++++++++++++++++++++++++++++ > This Mail Was Scanned By Mail-seCure System > at the Tel-Aviv University CC. > -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
