Dear Mr.Kent West,
>ts wrote:
>
>>> Kent West wrote:
>>>
>>>>>ts wrote:
>>>>>
>>>>>>At first I ventured into debian installation ( via networking)again,
>>>>>>the embeded LAN chips(RTL8201BL , RTL8101L) of current EPOX-8RDA3G
>>>>>>motherboard (nforce2 Ultra 400 +MCP chipsets) can't be detected whatever
>>>>>>kernel driver modules I set on.
>>>>>>
>>>>>>later on I nearly fulfilled debian's installation from hard disk by
>>>>>>downloading
>>>>>>"rescue.bin"&"root.bin"(from
>>>>>>http://ftp.debian.org/debian/dists/...ges-1.44/bf2.4/ )
>>>>>>"drivers.tgz"( from http://ftp.debian.org/debian/dists/.../current/bf2.4/)
>>>>>>"basedebs.tar"-27M
>>>>>>(from http://ftp.debian.org/debian/dists/....23-2002-07-18/)
>>>>>>and following up the prompts.
>>>>>>.
>>>>>>Now it's only a base system, I can login under console....
>>>>>>no x windows yet , what left packages should I download & install under
>>>>>>console ?is it possible to make networking chips work and make rest of
>>>>>>installation via network and upgrade kernel to latest 2.6.3? and how to do it
>>>>>>under console with commands?
>>>>>>
>>>>>
>>>>I'm not sure what modules you'll need for your LAN, but a quick google
>>>>indicates it might be the "8139too". Try "modprobe 8139too".
>>>>
>>>>You can also try "lspci"; if it reports "unknown device", you'll
>>>>probably need to upgrade your kernel (which you're wanting to do anyway).
>>>>
>>>>You can also look to see what modules are available under
>>>>/lib/modules/[kernel version]/kernel.
>>>>
>>>>You can also try booting off a Knoppix CD to see what modules it uses
>>>>(assuming it works on the network). If it works on the network, you can
>>>>download and manually install any packages for upgrading your kernel
>>>>(and it's painful, but do-able).
>>>>
>>>>Once you have networking, and have configured your /etc/apt/sources.list
>>>>file to pull from the network, you can "apt-get update" followed by
>>>>"apt-get install x-window-system" to start making progress on getting X
>>>>up and running.
>>
>>westkDear Mr. Kent West,
>>
>>
>>Thanks for your reply!
>>
>>
>A couple of suggestions:
>* Keep posts on the lists rather than switching to private mail (unless
>the posts drift off-topic). This allows other people who may know the
>answer to contribute; it also allows other people looking for the same
>answers to see them or find them in the archives.
>* Don't top-post. Reply in conversational style, so that anyone coming
>into the thread in the middle can read from top to bottom in the order
>in which posts were made.
>
I'll obey and follow it.
>>Your adivices 're realy helpful, by typing " lspci" system indicated the NIC is
>>8139too, at "eth0"...
>>it's available under /lib/modules/kernel 2.4.18/kernel.
>>
>>
>>
>So "modprobe 8139too" should load the module, and "lsmod" should show
>the module as listed. Now you'll need to restart networking (or reboot)
>with "/etc/init.d/networking restart". This assumes you have your
>network defined properly in /etc/network/interfaces.
>
it prompted error messages following "modprobe 8139too". "modprobe RTL-8139".
"can't locate module 8139too."
"can't locate module RTL-8139."
>>But when I tried to ping my local ISP, ended up with no reply, within Lan "ping
>>192.168.1.2" it did respond.
>>
>>
>I'm assuming 192.168.1.2 is a different machine on your LAN, and not the
>machine you're having issues with? Were you pinging your local ISP by
>name or by number? If by name, I suspect that /etc/resolv.conf does not
>have proper DNS entries. If by number, we'll need to know more about how
>your LAN is setup (straight to modem? going through a router? are you
>getting dhcp addresses or using static? etc), and this is where keeping
>your posts on the list will help, as I'm no networking guru.
>
there're two NIC networking cards embeded with EPOX-8RDA3G MB.in fact , "ping
192.168.1.0" it responds as well.
I ping local ISP by IP number, the Lan was set up via ADSL modem working under router
mood( being set as gateway:192.168.1.1), surely it's set into static( under
mandrake9.1 i set the same configuration, it works well).
>
>* Different topics should probably go into different email threads.
>
>>Do you think I should download the tar file (NVIDIA_nforce-1.0-0261.tar.gz )
>>From(http://download.nvidia.com/XFree86/nforce/1.0-0261/NVIDIA_nforce-1.0-0261.tar.gz)
>> or
>>Source RPM file (NVIDIA_nforce-1.0-0261.src.rpm) from
>>(http://download.nvidia.com/XFree86/nforce/1.0-0261/NVIDIA_nforce-1.0-0261.src.rpm)
>>and install it and thus set proper configuration of EPOX-8RDA3G MB& its NIC lan?
>>
>>
>If the 8139too module installed properly without errors, I suspect
>that's all you'll need; you just need to finish getting the rest of the
>network configured properly. Of course, I could be wrong, and the
>8139too module may be failing silently, in which case you might need to
>resort to the nforce drivers. I just don't know. (Another reason for
>keeping your posts on the list, for others more experienced with nforce
>boards might have some input.)
>
>>BY the way how should I configure /etc/apt/sources.list ? is edit it under "VI"
>>enough to handle the task?
>>
>>
>>
>Any text editor, including "vi", will work fine. I personally prefer
>"nano", but that's just personal preference.
>
>Mine looks like so (but notice that I'm running unstable):
>
>> [EMAIL PROTECTED]:/home/westk> cat /etc/apt/sources.list
>>
>> deb http://ftp.us.debian.org/debian/ stable main non-free contrib
>> deb http://non-us.debian.org/debian-non-US stable/non-US main contrib
>> non-free
>>
>> deb http://ftp.us.debian.org/debian/ unstable main non-free contrib
>> deb http://non-us.debian.org/debian-non-US unstable/non-US main
>> contrib non-free
>>
>>
>> #deb-src http://ftp.us.debian.org/debian/ stable main non-free contrib
>> #deb-src http://non-us.debian.org/debian-non-US stable/non-US main
>> contrib non-free
>>
>>
>> deb http://security.debian.org stable/updates main contrib non-free
>
>
>--
>Kent
>
>.
Tom
6/3/2004.....
?RP?€Dzf??y?? ????-弊?╄?
"??皋r??.n?????????f?赍?lu驸jz+
