setup second nic on debian/powerpc not succeeding

[Joey Macao]

hi

tried to set up a second nic for my debian woody on a powerpc
the first nic was configured during installation and is working fine
i added the second nic (dlink de-528) with the appropriate driver (ne2k-pci)
booting up, the card seems to be detected and ifconfig gives me the 
following:

eth0      Link encap:Ethernet  HWaddr 00:05:02:C9:BA:CC
         inet addr:192.168.1.3  Bcast:192.168.0.255  Mask:255.255.255.0
         UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
         RX packets:3527 errors:1 dropped:1 overruns:0 frame:1
         TX packets:862 errors:0 dropped:0 overruns:0 carrier:0
         collisions:0 txqueuelen:100
         RX bytes:326800 (319.1 KiB)  TX bytes:148737 (145.2 KiB)
         Interrupt:42 Base address:0x8000
eth1      Link encap:Ethernet  HWaddr 00:50:BA:B3:1D:31
         inet addr:192.168.1.8  Bcast:192.168.0.255  Mask:255.255.255.0
         UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
         RX packets:69 errors:0 dropped:0 overruns:0 frame:0
         TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
         collisions:0 txqueuelen:100
         RX bytes:5484 (5.3 KiB)  TX bytes:0 (0.0 b)
         Interrupt:24 Base address:0x1060
lo        Link encap:Local Loopback
         inet addr:127.0.0.1  Mask:255.0.0.0
         UP LOOPBACK RUNNING  MTU:16436  Metric:1
         RX packets:45 errors:0 dropped:0 overruns:0 frame:0
         TX packets:45 errors:0 dropped:0 overruns:0 carrier:0
         collisions:0 txqueuelen:0
         RX bytes:3191 (3.1 KiB)  TX bytes:3191 (3.1 KiB)
tap0      Link encap:Ethernet  HWaddr FE:FD:00:00:00:00
         inet addr:192.168.0.1  Bcast:0.0.0.0  Mask:255.255.255.255
         UP BROADCAST RUNNING NOARP MULTICAST  MTU:1492  Metric:1
         RX packets:0 errors:0 dropped:0 overruns:0 frame:0
         TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
         collisions:0 txqueuelen:0
         RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)
         Interrupt:5
however pinging to 192.168.1.8 gives me: "Destination Host Unreachable"

any ideas?

thanks,
joey
ASR

_________________________________________________________________



--
To UNSUBSCRIBE, email to [EMAIL PROTECTED] 
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]