On Sat, Feb 14, 2004 at 02:24:28AM +0000, Antony Gelberg wrote: > I came in a bit late here. Have a look on my site - > http://www.antgel.co.uk/compsci/linux/promise_raid.shtml. This has the > Promise driver module built against 2.4.18-bf24.
I have a 376 on my motherboard, but its disabled [1]. Currently I have a Promise Ultra TX 133 in there. There were problems in 2.4.18's Promise drivers fixed in 2.4.20, which is why you have to do the long convoluted process referenced in: http://lists.debian.org/debian-user/2004/debian-user-200401/msg05141.html Any chance of a backported Ultra TX 133 driver that could just be put on a floppy like this? --------- [1] I have an Asus P4C800-E with an onboard SATA/RAID controller. If I don't disable it I get memory errors with Microsoft's Memory Diagnostic tool (http://oca.microsoft.com/en/windiag.asp), and lockups when playing Freedom Fighter. memtest86 reports no errors! The errors are in Bank 0, even when you switch the chips, or if you put the chips in Bank 1 and 3 the errors are always in Bank 1. I found this: http://groups.google.com/groups?hl=en&lr=&ie=UTF-8&oe=UTF-8&threadm=JIxNb.34286%24ZuL1.19485%40twister01.bloor.is.net.cable.rogers.com&rnum=1&prev=/groups%3Fq%3Dp4c800%2Bbank%2B0%26hl%3Den%26lr%3D%26ie%3DUTF-8%26oe%3DUTF-8%26selm%3DJIxNb.34286%2524ZuL1.19485%2540twister01.bloor.is.net.cable.rogers.com%26rnum%3D1 which says I should disable it. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]