A couple of weeks ago I upgraded to trixie. Since then I've gotten a
number of messages like
Device: /dev/sda [SAT], 8 Currently unreadable (pending) sectors and
Device: /dev/sda [SAT], 30 Offline uncorrectable sectors These seem to
come within a day or so of a reboot, but it hasn't been long enough to
know if that's a red herring.
I ran "smartctl -t offline /dev/sda", and the eventual result of
"smartctl -a /dev/sda" shows
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE
UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail
Always - 0
2 Throughput_Performance 0x0005 140 140 054 Pre-fail
Offline - 68
3 Spin_Up_Time 0x0007 178 178 024 Pre-fail
Always - 351 (Average 293)
4 Start_Stop_Count 0x0012 100 100 000 Old_age
Always - 120
5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail
Always - 0
7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail
Always - 0
8 Seek_Time_Performance 0x0005 124 124 020 Pre-fail
Offline - 33
9 Power_On_Hours 0x0012 088 088 000 Old_age
Always - 85831
10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail
Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age
Always - 120
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age
Always - 1028
193 Load_Cycle_Count 0x0012 100 100 000 Old_age
Always - 1028
194 Temperature_Celsius 0x0002 171 171 000 Old_age
Always - 35 (Min/Max 21/43)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age
Always - 0
197 Current_Pending_Sector 0x0022 100 100 000 Old_age
Always - 0
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age
Offline - 0
199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age
Always - 0
SMART Error Log Version: 1
No Errors Logged
which seems to indicate no problems.
I admit I'm not a smartctl wizard, but to me it seems that smartctl is
contradicting itself.
Can anyone help me out?
