Hi all,
I provision servers at different hosting providers using preseeding. Some of
them have a dual-stack (DHCPv4 + Static IPv6) network connection, others are
IPv6-only (static too).
If I run the installer using the following command-line parameters, only the
IPv6 networking is configured ("iface eth0 inet dhcp" missing from
/etc/network/interfaces):
[...]/linux [...] netcfg/disable_autoconfig=true
netcfg/get_ipaddress=2a01:XXXX:XXXX:YYYY::1
netcfg/get_netmask=ffff:ffff:ffff:ffff:: netcfg/get_gateway=fe80::1
netcfg/get_nameservers="2a01:XXXX:ffff::1 2a01:XXXX:ffff::2"
netcfg/confirm_static=true url=https://boot.example.com preseed-md5=XXX [...]
If I remove « netcfg/disable_autoconfig » from the command-line above, only the
IPv4 is configured in /etc/network/interfaces.
Is there a way to configure a dual-stack network interface using preseeding
whitout relying on things like a custom script run by preseed/late_command?
Thanks,
--
Jonathan Leroy
