On Wed, May 21, 2025 at 11:19:10PM +0200, Mihaly Zachar wrote:
I configured an IP in the ens2f1np1 anyway and what happened?
It worked .. :(
I thought that there should be link even if there is no IP configured...
Lesson learned.
Interface won't report link until it's configured up; setting the IP
implicitly configured it up. You could do that without setting an IP by
running
ip link set ens2f1np1 up
if you then run
ip link
it should report either LOWER_UP if the link is up or NO_CARRIER if the
link is down.
