I am configuring my firewall under Debian .0r2 kernel 2.4.18 When it is only one card intalled, I can go the Web and surfing as I want, and so on. for that, the module is 3c59x into the kernel and PPPs modules (using pppoe protocol) for the ADSL modem Fast 908 with ethernet interface. So with one card, there is no problem. but a firewall has at least two interfaces to proceed NAT, Firewalling, etc...
But when I put the secand card into the PCI bus, the modem is not only not found, but also the second interface make an internal error so that the machine is not processing for ever until rebooting. When pppoeconf is searching interface to locate the modem, the first interface doesn't respond (but it must I think) and the second is causing the problem. At boot, the two cards as assigned to IRQ10, so is that ok or not? in my /etc/network/interfaces, I put the network 192.168.10.x the the first card and 192.168.20.x to the second. I don't know if this causes problems (but I don't think). Is anyone could help me to resolve the problem and explain me why the system doesn't work normally? For information, the PNP OS Bios is off. ===== Vincent de BOSSOREILLE Angers - France [EMAIL PROTECTED] _________________________________________________________________ Do You Yahoo!? -- Une adresse @yahoo.fr gratuite et en français ! Yahoo! Mail : http://fr.mail.yahoo.com -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
