On 12/13/23 10:41, Tom Furie wrote:
gene heskett <ghesk...@shentel.net> writes:
I thought I was doing things right a year back when I built a raid10
for my /home partition. but I'm tired of fighting with it for
access. Anything that wants to open a file on it, is subjected to a
freeze of at least 30 seconds BEFORE the file requester is drawn on
screen. Once it has done the screen draw and the path is established,
Where is the raid10 located and how is it interfaced to the device
you're accessing it from? That delay, along with other things you
mentioned suggests (but this is only a guess without other relevant
information) a DNS timeout.
It is a separate 6 port sata controller because the mobo is out of
ports. There is no obvious lag during bios post or grub booting it.
/etc/fstab:
gene@coyote:/etc/lvm/profile$ cat /etc/fstab
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# systemd generates mount units based on this file, see systemd.mount(5).
# Please run 'systemctl daemon-reload' after making changes here.
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda1 during installation
UUID=f295334b-fdcb-4428-bed3-cb9e9e129be6 / ext4
errors=remount-ro 0 1
# /tmp was on /dev/sda3 during installation
UUID=518cb65d-21f0-493f-8bb5-a5f435796991 /tmp ext4
defaults 0 2
# swap was on /dev/sda2 during installation
UUID=422b50db-9913-4ed3-92c3-dc18be72cc61 none swap sw
0 0
/dev/sr0 /media/cdrom0 udf,iso9660 user,noauto 0 0
UUID=bc6135de-0578-4e3b-b2c0-5c4687abd9bd /home ext4
errors=remount-ro 0 2
UUID=d24c3a99-9f40-4b71-92d4-916804553cb5 none swap sw
0 0
-----------------------------
From df:
gene@coyote:/etc/lvm/profile$ sudo df
[sudo] password for gene:
Filesystem 1K-blocks Used Available Use% Mounted on
udev 16328024 0 16328024 0% /dev
tmpfs 3272676 1876 3270800 1% /run
/dev/sda1 863983352 18784928 801236776 3% /
tmpfs 16363376 12 16363364 1% /dev/shm
tmpfs 5120 8 5112 1% /run/lock
/dev/sda3 47749868 222628 45069232 1% /tmp
/dev/md0p1 1796382580 330887008 1374170596 20% /home
tmpfs 3272672 45868 3226804 2% /run/user/1000
-----------------------------
A dhcpd has been installed, but is limited to issuing a single fixed
address to a 3d printer plugged into my network, as the printer doesn't
seem to know what to do with a hosts file that runs the rest of my home
network. Anything else you want, just ask.
Cheers,
Tom
.
Thank you Tom.
Cheers, Gene Heskett.
--
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author, 1940)
If we desire respect for the law, we must first make the law respectable.
- Louis D. Brandeis
