On Tue, Jul 11, 2023 at 4:18 PM Mick Ab <recoverymail123...@gmail.com> wrote: > > I am thinking of changing my storage from two 1TB hard drives in a software > RAID 1 configuration to two M.2 Nvme 1 TB SSDs. The two SSDs would be put > into a software RAID 1 configuration. Currently each hard drive contains both > the operating system and user data. > > What steps would you recommend to achieve the above result and would those > steps be the quickest way ? > > One of the M.2 slots can operate at PCIe 4.0 and PCIe 3.0, while the other > slot can only operate at PCIe 3.0. If they are to be in a RAID 1 array, I > guess that both slots should be operated at PCIe 3.0 speed.
Are these the same machine or two different machines? If this were me performing the task... I would add an external drive on the old machine, boot to Clonezilla, and use Clonezilla to backup/clone to the external drive. Then I would plug the external drive into the new machine with the SSDs, and use Clonezilla to write the backup from the external drive to the new machine. Jeff
