Note: This reply is addressed specifically to Brian.
Mon cheri
> Sent: Thursday, March 03, 2022 at 1:59 AM
> From: "Brian" <a...@cityscape.co.uk>
> To: debian-user@lists.debian.org
> Subject: Re: What should I put inside the file called wlan0?
>
>
> (Nothing to do with your question but these two lines are superfluous:
>
> auto lo
> iface lo inet loopback).
>
> --
> Brian.
>
I just remembered I should seek more clarification about your above remark.
The contents of my /etc/network/interfaces file are:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
source /etc/network/interfaces.d/*
# The loopback network interface
auto lo
iface lo inet loopback
# The primary network interface
allow-hotplug enp2s0
iface enp6s0 inet static
address 192.168.1.77/24
gateway 192.168.1.1
# dns-* options are implemented by the resolvconf package, if installed
dns-nameservers 1.1.1.1 8.8.8.8
while in /etc/network/interfaces.d/brian they are:
# The loopback network interface
auto lo
iface lo inet loopback
# The primary network interface
allow-hotplug wlp7s0
iface wlp7s0 inet static
wpa-ssid JupiterRising
wpa-psk (a long string of alphanumeric characters)
address 192.168.1.99/24
gateway 192.168.1.1
# dns-* options are implemented by the resolvconf package, if installed
dns-nameservers 1.1.1.1 8.8.8.8
Did you mean to tell me that the following lines can be omitted from both
/etc/network/interfaces AND /etc/network/interfaces.d/brian ?
# The loopback network interface
auto lo
iface lo inet loopback
Best wishes.
Stella
