Hello,
First of all, thanks for the reply.
El vie, 24-12-2021 a las 03:30 +0500, Alexander V. Makartsev escribió:
> You can review SMART attributes which keep track of device's health and
> metrics.
> This utility is part of "smartmontools" package.
> Run this one-liner to see values of relevant attributes:
> $ sudo smartctl -A /dev/sda | grep -E '5 Realloc|183 Runtime|197
> Current|199 UDMA'
>
> Here is what they should like on perfectly fine hard drive:
> $ sudo smartctl -A /dev/sda | grep -E '5 Realloc|183 Runtime|197
> Current|199 UDMA'
> 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail
> Always - 0
> 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age
> Always - 0
> 197 Current_Pending_Sector 0x0012 100 100 000 Old_age
> Always - 0
> 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age
> Always - 0
>
> Raw values are displayed on the right and they all zeroes. Post the output
> you got with next reply.
> You should backup or "ddrescue" your data from this drive and RMA\replace it
> or better switch to SSD disk.
>
Well, I installed the package in question and ran the very same command you
said. However, the Runtime_Bad_Block attribute doesn't appear. Here's the
output:
$ sudo smartctl -A /dev/sda | grep -E '5 Realloc|183 Runtime|197 Current|199
UDMA'
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-
fail Always - 0
197
Current_Pending_Sector 0x0032 200 200 000 Old_age Always -
1
199
UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always -
0
If I understood correctly what I read, this means there's one sector waiting
for remapping, right? And why doesn't the Runtime_Bad_Block attribute appear?
