hi ya kieren
On Sat, 27 Dec 2003, Kevin Mark wrote:
> On Sun, Dec 28, 2003 at 08:24:35AM +1100, Kieren wrote:
> >
> > I have followed the Hard-Disk-Upgrade to the best of my ability,
> > upgrading the 3.5 gb hard drive on my old pentium 100 (Dell) laptop to
> > a 30 gig hard drive. Everything went well, except that when I boot I
> > get the following:
> >
> > Loading Linux ...............................
> >
> >
> > Then everything stops.
yup it will stop... unless you have /flash/vmlinuz
stick a bootable cdrom into your laptop ...
fix lilo.conf the way it should be ??
> > My /etc/lilo.conf looks like this:
> >
> > lba32
> > disk=/dev/hdc bios=0x80
> > boot=/dev/hdc1
> > root=/dev/hda1
you have 2 disks ???
usually,
boot=/dev/hda
root=/dev/hda1 or whatever you installed for /
> > map=/flash/boot/map
> > install=/flash/boot/boot.b
yuou need to change /flash to something that exists /??
typically /boot instead
> > vga=normal
> > append="apm=on"
> > default=Linux
> > image=/flash/vmlinuz # This drive is mounted on /flash when
looks like you're playing with flash ??
c ya
alvin
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
