On 2020-09-20 00:49, Long Wind wrote:
On Sunday, September 20, 2020, 2:15:21 PM GMT+8, David Christensen
First, backup your data.
Please run the following command and post your complete console session
-- prompt, command, output. Substitute DISKID as appropriate:
# smartctl -x /dev/disk/by-id/DISKID
Thank you for posting the smartctl report. I don't see any obvious
problems.
Thank David! i changed data cable, it doesn't seem to helpi'd better throw it
away, time i serve it is far more than it serve meand i doubt credibility of
smart report and badblocks checkit nearly pass test by badblocks with -w option
That drive is SATA 3 Gbps. Are your SATA cables marked for 3 Gbps or
faster?
/sbin/smartctl -x /dev/sdb
smartctl 6.6 2017-11-05 r4594 [i686-linux-4.19.0-10-686] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke,
http://www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate Pipeline HD 5900.2
Device Model: ST3320311CS
Go through the test, wipe, and re-test process with Seatools Bootable:
https://www.seagate.com/support/downloads/seatools/
David
